[U-Boot] [PATCH] usb:udc:samsung:fix Remove the req_config flag
Lukasz Majewski
l.majewski at samsung.com
Tue Mar 13 09:08:06 CET 2012
The dev->req_config flag was indicating that the forwarded
request needs to perform the usb gadget delayed status.
This is however not needed anymore, so it can be removed.
Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Cc: Marek Vasut <marex at denx.de>
---
drivers/usb/gadget/s3c_udc_otg_xfer_dma.c | 18 +++++-------------
include/usb/s3c_udc.h | 2 +-
2 files changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
index b11108d..afd4931 100644
--- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
@@ -1316,7 +1316,7 @@ void s3c_ep0_setup(struct s3c_udc *dev)
/* cope with automagic for some standard requests. */
dev->req_std = (usb_ctrl->bRequestType & USB_TYPE_MASK)
== USB_TYPE_STANDARD;
- dev->req_config = 0;
+
dev->req_pending = 1;
/* Handle some SETUP packets ourselves */
@@ -1337,10 +1337,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n",
__func__, usb_ctrl->wValue);
- if (usb_ctrl->bRequestType == USB_RECIP_DEVICE) {
+ if (usb_ctrl->bRequestType == USB_RECIP_DEVICE)
reset_available = 1;
- dev->req_config = 1;
- }
+
break;
case USB_REQ_GET_DESCRIPTOR:
@@ -1352,10 +1351,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n",
__func__, usb_ctrl->wValue);
- if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE) {
+ if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE)
reset_available = 1;
- dev->req_config = 1;
- }
+
break;
case USB_REQ_GET_CONFIGURATION:
@@ -1404,12 +1402,6 @@ void s3c_ep0_setup(struct s3c_udc *dev)
spin_lock(&dev->lock);
if (i < 0) {
- if (dev->req_config) {
- DEBUG_SETUP("\tconfig change 0x%02x fail %d?\n",
- (u32)usb_ctrl->bRequest, i);
- return;
- }
-
/* setup processing failed, force stall */
s3c_udc_ep0_set_stall(ep);
dev->ep0state = WAIT_FOR_SETUP;
diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
index 31d8f6c..6c973b6 100644
--- a/include/usb/s3c_udc.h
+++ b/include/usb/s3c_udc.h
@@ -102,7 +102,7 @@ struct s3c_udc {
unsigned char usb_address;
- unsigned req_pending:1, req_std:1, req_config:1;
+ unsigned req_pending:1, req_std:1;
};
extern struct s3c_udc *the_controller;
--
1.7.2.3
More information about the U-Boot
mailing list