[U-Boot] [PATCH] mx53: Make PLL2 to be the parent of UART clock

Fabio Estevam festevam at gmail.com
Wed Mar 21 16:42:45 CET 2012

Change the parent UART clock to be PLL2, so that U-boot can also boot
a Freescale 2.6.35 kernel for mx53.

FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid
conflicts with IPU clocks, so that the video resolution can be changed
without affecting the UART clock. 

On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded
and this patch fixes this problem.

Tested on a mx53loco board booting a FSL kernel and also a mainline kernel.

Reported-by: Otavio Salvador <otavio at ossystems.com.br>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
 arch/arm/cpu/armv7/mx5/lowlevel_init.S |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 01f6d75..90c6ec1 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -284,10 +284,24 @@
 	ldr r1, =0x00C30321
 	str r1, [r0, #CLKCTL_CSCDR1]
 #elif defined(CONFIG_MX53)
+	/* Switch peripheral to PLL2 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x00808145
+	orr r1, r1, #(2 << 10)
+	orr r1, r1, #(0 << 16)
+	orr r1, r1, #(1 << 19)
+	str r1, [r0, #CLKCTL_CBCDR]
+	ldr r1, =0x00016154
+	str r1, [r0, #CLKCTL_CBCMR]
+	/* Change uart clk parent to pll2*/
+	ldr r1, [r0, #CLKCTL_CSCMR1]
+	and r1, r1, #0xfcffffff
+	orr r1, r1, #0x01000000
+	str r1, [r0, #CLKCTL_CSCMR1]
 	ldr r1, [r0, #CLKCTL_CSCDR1]
-	orr r1, r1, #0x3f
-	eor r1, r1, #0x3f
-	orr r1, r1, #0x21
+	and r1, r1, #0xffffffc0
+	orr r1, r1, #0x0a
 	str r1, [r0, #CLKCTL_CSCDR1]
 	/* make sure divider effective */

More information about the U-Boot mailing list