[U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled
Eric Nelson
eric.nelson at boundarydevices.com
Sat Mar 3 00:15:47 CET 2012
Whoops.
Forgot to add the origin of this patch to the commit message:
http://lists.denx.de/pipermail/u-boot/2012-February/117695.html
Thanks Marek.
On 03/02/2012 04:06 PM, Eric Nelson wrote:
> ensure that transmit and receive buffers are cache-line aligned
> invalidate cache after each packet received
> flush cache before transmitting
>
> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
> ---
> drivers/net/fec_mxc.c | 248 ++++++++++++++++++++++++++++++++++++-------------
> drivers/net/fec_mxc.h | 19 +----
> 2 files changed, 184 insertions(+), 83 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index 1fdd071..f72304b 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -50,6 +50,33 @@ DECLARE_GLOBAL_DATA_PTR;
> #define CONFIG_FEC_MXC_SWAP_PACKET
> #endif
>
> +#ifndef CONFIG_FEC_DESC_ALIGNMENT
> +#define CONFIG_FEC_DESC_ALIGNMENT ARCH_DMA_MINALIGN
> +#endif
> +
> +#ifndef CONFIG_FEC_DATA_ALIGNMENT
> +#define CONFIG_FEC_DATA_ALIGNMENT ARCH_DMA_MINALIGN
> +#endif
> +
> +/* Check various alignment issues at compile time */
> +#if ((CONFIG_FEC_DESC_ALIGNMENT< 16) || (CONFIG_FEC_DESC_ALIGNMENT % 16 != 0))
> +#error "CONFIG_FEC_DESC_ALIGNMENT must be multiple of 16!"
> +#endif
> +
> +#if ((CONFIG_FEC_DATA_ALIGNMENT< 16) || (CONFIG_FEC_DATA_ALIGNMENT % 16 != 0))
> +#error "CONFIG_FEC_DATA_ALIGNMENT must be multiple of 16!"
> +#endif
> +
> +#if ((PKTALIGN< CONFIG_FEC_DATA_ALIGNMENT) || \
> + (PKTALIGN % CONFIG_FEC_DATA_ALIGNMENT != 0))
> +#error "PKTALIGN must be multiple of CONFIG_FEC_DATA_ALIGNMENT!"
> +#endif
> +
> +#if ((PKTSIZE_ALIGN< CONFIG_FEC_DATA_ALIGNMENT) || \
> + (PKTSIZE_ALIGN % CONFIG_FEC_DATA_ALIGNMENT != 0))
> +#error "PKTSIZE_ALIGN must be multiple of CONFIG_FEC_DATA_ALIGNMENT!"
> +#endif
> +
> #undef DEBUG
>
> struct nbuf {
> @@ -259,43 +286,47 @@ static int fec_tx_task_disable(struct fec_priv *fec)
> * Initialize receive task's buffer descriptors
> * @param[in] fec all we know about the device yet
> * @param[in] count receive buffer count to be allocated
> - * @param[in] size size of each receive buffer
> + * @param[in] dsize desired size of each receive buffer
> * @return 0 on success
> *
> * For this task we need additional memory for the data buffers. And each
> * data buffer requires some alignment. Thy must be aligned to a specific
> - * boundary each (DB_DATA_ALIGNMENT).
> + * boundary each.
> */
> -static int fec_rbd_init(struct fec_priv *fec, int count, int size)
> +static int fec_rbd_init(struct fec_priv *fec, int count, int dsize)
> {
> - int ix;
> - uint32_t p = 0;
> -
> - /* reserve data memory and consider alignment */
> - if (fec->rdb_ptr == NULL)
> - fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT);
> - p = (uint32_t)fec->rdb_ptr;
> - if (!p) {
> - puts("fec_mxc: not enough malloc memory\n");
> - return -ENOMEM;
> - }
> - memset((void *)p, 0, size * count + DB_DATA_ALIGNMENT);
> - p += DB_DATA_ALIGNMENT-1;
> - p&= ~(DB_DATA_ALIGNMENT-1);
> -
> - for (ix = 0; ix< count; ix++) {
> - writel(p,&fec->rbd_base[ix].data_pointer);
> - p += size;
> - writew(FEC_RBD_EMPTY,&fec->rbd_base[ix].status);
> - writew(0,&fec->rbd_base[ix].data_length);
> - }
> + uint32_t size;
> + int i;
> +
> /*
> - * mark the last RBD to close the ring
> + * Allocate memory for the buffers. This allocation respects the
> + * alignment
> */
> - writew(FEC_RBD_WRAP | FEC_RBD_EMPTY,&fec->rbd_base[ix - 1].status);
> + size = roundup(dsize, CONFIG_FEC_DATA_ALIGNMENT);
> + for (i = 0; i< count; i++) {
> + if (0 == fec->rbd_base[i].data_pointer) {
> + uint8_t *data = memalign(CONFIG_FEC_DATA_ALIGNMENT, size);
> + if (!data) {
> + printf("%s: error allocating rxbuf %d\n", __func__, i);
> + goto err;
> + }
> + fec->rbd_base[i].data_pointer = (uint32_t)data;
> + } // needs allocation
> + fec->rbd_base[i].status = FEC_RBD_EMPTY;
> + fec->rbd_base[i].data_length = 0;
> + }
> +
> + /* Mark the last RBD to close the ring. */
> + fec->rbd_base[i - 1].status = FEC_RBD_EMPTY | FEC_RBD_WRAP;
> fec->rbd_index = 0;
>
> return 0;
> +
> +err:
> + for (; i>= 0; i--)
> + free((uint8_t *)fec->rbd_base[i].data_pointer);
> +
> + return -ENOMEM;
> }
>
> /**
> @@ -312,8 +343,8 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size)
> */
> static void fec_tbd_init(struct fec_priv *fec)
> {
> - writew(0x0000,&fec->tbd_base[0].status);
> - writew(FEC_TBD_WRAP,&fec->tbd_base[1].status);
> + fec->tbd_base[0].status = 0;
> + fec->tbd_base[1].status = FEC_TBD_WRAP;
> fec->tbd_index = 0;
> }
>
> @@ -387,12 +418,25 @@ static int fec_open(struct eth_device *edev)
> {
> struct fec_priv *fec = (struct fec_priv *)edev->priv;
> int speed;
> + uint32_t addr, size;
> + int i;
>
> debug("fec_open: fec_open(dev)\n");
> /* full-duplex, heartbeat disabled */
> writel(1<< 2,&fec->eth->x_cntrl);
> fec->rbd_index = 0;
>
> + /* Invalidate all descriptors */
> + for (i = 0; i< FEC_RBD_NUM - 1; i++)
> + fec_rbd_clean(0,&fec->rbd_base[i]);
> + fec_rbd_clean(1,&fec->rbd_base[i]);
> +
> + /* Flush the descriptors into RAM */
> + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd),
> + CONFIG_FEC_DATA_ALIGNMENT);
> + addr = (uint32_t)&fec->rbd_base[0];
> + flush_dcache_range(addr, addr + size);
> +
> #ifdef FEC_QUIRK_ENET_MAC
> /* Enable ENET HW endian SWAP */
> writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP,
> @@ -478,38 +522,44 @@ static int fec_open(struct eth_device *edev)
>
> static int fec_init(struct eth_device *dev, bd_t* bd)
> {
> - uint32_t base;
> struct fec_priv *fec = (struct fec_priv *)dev->priv;
> uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
> uint32_t rcntrl;
> - int i;
> + uint32_t size;
> + int i, ret;
>
> /* Initialize MAC address */
> fec_set_hwaddr(dev);
>
> /*
> - * reserve memory for both buffer descriptor chains at once
> - * Datasheet forces the startaddress of each chain is 16 byte
> - * aligned
> + * Allocate transmit descriptors, there are two in total. This
> + * allocation respects cache alignment.
> */
> - if (fec->base_ptr == NULL)
> - fec->base_ptr = malloc((2 + FEC_RBD_NUM) *
> - sizeof(struct fec_bd) + DB_ALIGNMENT);
> - base = (uint32_t)fec->base_ptr;
> - if (!base) {
> - puts("fec_mxc: not enough malloc memory\n");
> - return -ENOMEM;
> + if (!fec->tbd_base) {
> + size = roundup(2 * sizeof(struct fec_bd),
> + CONFIG_FEC_DATA_ALIGNMENT);
> + fec->tbd_base = memalign(CONFIG_FEC_DESC_ALIGNMENT, size);
> + if (!fec->tbd_base) {
> + ret = -ENOMEM;
> + goto err1;
> + }
> + memset(fec->tbd_base, 0, size);
> }
> - memset((void *)base, 0, (2 + FEC_RBD_NUM) *
> - sizeof(struct fec_bd) + DB_ALIGNMENT);
> - base += (DB_ALIGNMENT-1);
> - base&= ~(DB_ALIGNMENT-1);
> -
> - fec->rbd_base = (struct fec_bd *)base;
> -
> - base += FEC_RBD_NUM * sizeof(struct fec_bd);
>
> - fec->tbd_base = (struct fec_bd *)base;
> + /*
> + * Allocate receive descriptors. This allocation respects cache
> + * alignment.
> + */
> + if (!fec->rbd_base) {
> + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd),
> + CONFIG_FEC_DATA_ALIGNMENT);
> + fec->rbd_base = memalign(CONFIG_FEC_DESC_ALIGNMENT, size);
> + if (!fec->rbd_base) {
> + ret = -ENOMEM;
> + goto err2;
> + }
> + memset(fec->rbd_base, 0, size);
> + }
>
> /*
> * Set interrupt mask register
> @@ -570,9 +620,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> * Initialize RxBD/TxBD rings
> */
> if (fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE)< 0) {
> - free(fec->base_ptr);
> - fec->base_ptr = NULL;
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto err3;
> }
> fec_tbd_init(fec);
>
> @@ -583,6 +632,13 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> #endif
> fec_open(dev);
> return 0;
> +
> +err3:
> + free(fec->rbd_base);
> +err2:
> + free(fec->tbd_base);
> +err1:
> + return ret;
> }
>
> /**
> @@ -631,9 +687,11 @@ static void fec_halt(struct eth_device *dev)
> * @param[in] length Data count in bytes
> * @return 0 on success
> */
> -static int fec_send(struct eth_device *dev, volatile void* packet, int length)
> +static int fec_send(struct eth_device *dev, volatile void *packet, int length)
> {
> unsigned int status;
> + uint32_t size;
> + uint32_t addr;
>
> /*
> * This routine transmits one frame. This routine only accepts
> @@ -650,15 +708,21 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
> }
>
> /*
> - * Setup the transmit buffer
> - * Note: We are always using the first buffer for transmission,
> - * the second will be empty and only used to stop the DMA engine
> + * Setup the transmit buffer. We are always using the first buffer for
> + * transmission, the second will be empty and only used to stop the DMA
> + * engine. We also flush the packet to RAM here to avoid cache trouble.
> */
> #ifdef CONFIG_FEC_MXC_SWAP_PACKET
> swap_packet((uint32_t *)packet, length);
> #endif
> - writew(length,&fec->tbd_base[fec->tbd_index].data_length);
> - writel((uint32_t)packet,&fec->tbd_base[fec->tbd_index].data_pointer);
> +
> + addr = (uint32_t)packet;
> + size = roundup(length, CONFIG_FEC_DATA_ALIGNMENT);
> + flush_dcache_range(addr, addr + size);
> +
> + fec->tbd_base[fec->tbd_index].data_length = length;
> + fec->tbd_base[fec->tbd_index].data_pointer = addr;
> +
> /*
> * update BD's status now
> * This block:
> @@ -667,9 +731,18 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
> * - might be the last BD in the list, so the address counter should
> * wrap (-> keep the WRAP flag)
> */
> - status = readw(&fec->tbd_base[fec->tbd_index].status)& FEC_TBD_WRAP;
> + status = fec->tbd_base[fec->tbd_index].status& FEC_TBD_WRAP;
> status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
> - writew(status,&fec->tbd_base[fec->tbd_index].status);
> + fec->tbd_base[fec->tbd_index].status = status;
> +
> + /*
> + * Flush data cache. This code flushes both TX descriptors to RAM.
> + * After this code this code, the descritors will be safely in RAM
> + * and we can start DMA.
> + */
> + size = roundup(2 * sizeof(struct fec_bd), CONFIG_FEC_DATA_ALIGNMENT);
> + addr = (uint32_t)fec->tbd_base;
> + flush_dcache_range(addr, addr + size);
>
> /*
> * Enable SmartDMA transmit task
> @@ -677,11 +750,16 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
> fec_tx_task_enable(fec);
>
> /*
> - * wait until frame is sent .
> + * Wait until frame is sent. On each turn of the wait cycle, we must
> + * invalidate data cache to see what's really in RAM. Also, we need
> + * barrier here.
> */
> + invalidate_dcache_range(addr, addr + size);
> while (readw(&fec->tbd_base[fec->tbd_index].status)& FEC_TBD_READY) {
> udelay(1);
> + invalidate_dcache_range(addr, addr + size);
> }
> +
> debug("fec_send: status 0x%x index %d\n",
> readw(&fec->tbd_base[fec->tbd_index].status),
> fec->tbd_index);
> @@ -707,6 +785,8 @@ static int fec_recv(struct eth_device *dev)
> int frame_length, len = 0;
> struct nbuf *frame;
> uint16_t bd_status;
> + uint32_t addr, size;
> + int i;
> uchar buff[FEC_MAX_PKT_SIZE];
>
> /*
> @@ -737,8 +817,23 @@ static int fec_recv(struct eth_device *dev)
> }
>
> /*
> - * ensure reading the right buffer status
> + * Read the buffer status. Before the status can be read, the data cache
> + * must be invalidated, because the data in RAM might have been changed
> + * by DMA. The descriptors are properly aligned to cachelines so there's
> + * no need to worry they'd overlap.
> + *
> + * WARNING: By invalidating the descriptor here, we also invalidate
> + * the descriptors surrounding this one. Therefore we can NOT change the
> + * contents of this descriptor nor the surrounding ones. The problem is
> + * that in order to mark the descriptor as processed, we need to change
> + * the descriptor. The solution is to mark the whole cache line when all
> + * descriptors in the cache line are processed.
> */
> + addr = (uint32_t)rbd;
> + addr&= ~(CONFIG_FEC_DATA_ALIGNMENT - 1);
> + size = roundup(sizeof(struct fec_bd), CONFIG_FEC_DATA_ALIGNMENT);
> + invalidate_dcache_range(addr, addr + size);
> +
> bd_status = readw(&rbd->status);
> debug("fec_recv: status 0x%x\n", bd_status);
>
> @@ -751,6 +846,13 @@ static int fec_recv(struct eth_device *dev)
> frame = (struct nbuf *)readl(&rbd->data_pointer);
> frame_length = readw(&rbd->data_length) - 4;
> /*
> + * Invalidate data cache over the buffer
> + */
> + addr = (uint32_t)frame;
> + size = roundup(frame_length, CONFIG_FEC_DATA_ALIGNMENT);
> + invalidate_dcache_range(addr, addr + size);
> +
> + /*
> * Fill the buffer and pass it to upper layers
> */
> #ifdef CONFIG_FEC_MXC_SWAP_PACKET
> @@ -765,11 +867,27 @@ static int fec_recv(struct eth_device *dev)
> (ulong)rbd->data_pointer,
> bd_status);
> }
> +
> /*
> - * free the current buffer, restart the engine
> - * and move forward to the next buffer
> + * Free the current buffer, restart the engine and move forward
> + * to the next buffer. Here we check if the whole cacheline of
> + * descriptors was already processed and if so, we mark it free
> + * as whole.
> */
> - fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd);
> + size = (CONFIG_FEC_DATA_ALIGNMENT / sizeof(struct fec_bd)) - 1;
> + if ((fec->rbd_index& size) == size) {
> + i = fec->rbd_index - size;
> + addr = (uint32_t)&fec->rbd_base[i];
> + for (; i<= fec->rbd_index + size; i++) {
> + if (i == (FEC_RBD_NUM - 1))
> + fec_rbd_clean(1,&fec->rbd_base[i]);
> + else
> + fec_rbd_clean(0,&fec->rbd_base[i]);
> + }
> + flush_dcache_range(addr,
> + addr + CONFIG_FEC_DATA_ALIGNMENT);
> + }
> +
> fec_rx_task_enable(fec);
> fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM;
> }
> diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
> index 2eb7803..852b2e0 100644
> --- a/drivers/net/fec_mxc.h
> +++ b/drivers/net/fec_mxc.h
> @@ -234,22 +234,6 @@ struct ethernet_regs {
> #endif
>
> /**
> - * @brief Descriptor buffer alignment
> - *
> - * i.MX27 requires a 16 byte alignment (but for the first element only)
> - */
> -#define DB_ALIGNMENT 16
> -
> -/**
> - * @brief Data buffer alignment
> - *
> - * i.MX27 requires a four byte alignment for transmit and 16 bits
> - * alignment for receive so take 16
> - * Note: Valid for member data_pointer in struct buffer_descriptor
> - */
> -#define DB_DATA_ALIGNMENT 16
> -
> -/**
> * @brief Receive& Transmit Buffer Descriptor definitions
> *
> * Note: The first BD must be aligned (see DB_ALIGNMENT)
> @@ -282,8 +266,7 @@ struct fec_priv {
> struct fec_bd *tbd_base; /* TBD ring */
> int tbd_index; /* next transmit BD to write */
> bd_t *bd;
> - void *rdb_ptr;
> - void *base_ptr;
> + uint8_t *tdb_ptr;
> int dev_id;
> int phy_id;
> struct mii_dev *bus;
More information about the U-Boot
mailing list