[U-Boot] Please pull u-boot-ti/next
Tom Rini
trini at ti.com
Mon Mar 26 21:06:47 CEST 2012
On Fri, Mar 16, 2012 at 10:15:28AM -0700, Tom Rini wrote:
> Hello,
>
> The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
> Ian Campbell (1):
> ARM: dreamplug: Enable FDT support
This has been updated as follows:
The following changes since commit 5c91ee919c359e89fcb3230722253dbb9b4f7e32:
Ian Campbell (1):
ARM: dreamplug: Enable FDT support
are available in the git repository at:
git://git.denx.de/u-boot-ti next
Aneesh V (6):
arm: adapt asm/linkage.h from Linux
armv7: add appropriate headers for assembly functions
ARM: enable Thumb build
armv7: Use -march=armv7-a and thereby enable Thumb-2
omap4+: Avoid using __attribute__ ((__packed__))
OMAP4: enable Thumb build
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Enric Balletbò i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Grazvydas Ignotas (3):
OMAP3: pandora: pin mux updates for DM3730 board variant
OMAP3: pandora: revise GPIO configuration
OMAP3: pandora: drop console kernel argument
Heiko Schocher (1):
ARM: davinci: fixes for cam_enc_4xx board
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
SRICHARAN R (16):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
Tom Rini (2):
tools, config.mk: Add gcc-version.sh, cc-version test from Linux
Makefile: Add a 'checkthumb' rule
Makefile | 7 +
README | 8 +
arch/arm/config.mk | 27 +-
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
arch/arm/cpu/armv7/start.S | 13 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap3/mux.h | 6 +
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
arch/arm/include/asm/emif.h | 76 +++-
arch/arm/include/asm/linkage.h | 7 +
arch/arm/include/asm/omap_common.h | 11 +-
board/ait/cam_enc_4xx/cam_enc_4xx.c | 55 ++-
board/ait/cam_enc_4xx/config.mk | 7 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
board/cm_t35/cm_t35.c | 2 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 2 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 59 ++-
board/pandora/pandora.h | 6 +
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 4 +-
config.mk | 6 +-
drivers/mmc/omap_hsmmc.c | 61 +++-
drivers/power/Makefile | 1 +
drivers/power/twl6035.c | 65 +++
include/configs/cam_enc_4xx.h | 13 +-
include/configs/igep0030.h | 261 ----------
include/configs/{igep0020.h => igep00x0.h} | 15 +-
include/configs/omap3_pandora.h | 3 +-
include/configs/omap4_common.h | 2 +
include/configs/omap5_evm.h | 25 +-
include/linux/linkage.h | 7 +-
.../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
tools/gcc-version.sh | 32 ++
92 files changed, 1821 insertions(+), 1239 deletions(-)
copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 arch/arm/include/asm/linkage.h
create mode 100644 drivers/power/twl6035.c
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (97%)
rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
create mode 100755 tools/gcc-version.sh
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120326/c734ea55/attachment.pgp>
More information about the U-Boot
mailing list