[U-Boot] [RFC] mx53loco: Add 1GHz support
stefano babic
sbabic at denx.de
Sat Mar 17 09:23:23 CET 2012
Am 16/03/2012 22:01, schrieb Fabio Estevam:
> On Fri, Mar 16, 2012 at 5:21 PM, Fabio Estevam <festevam at gmail.com> wrote:
>
>> I would be glad to receive some suggestion in order to get the 1GHz frequency
>> printed during the initial boot log.
>
> If I print the frequency inside board_late_init() then I see the
> correct reported CPU frequency:
>
> U-Boot 2011.12-07170-g536d7cc-dirty (Mar 16 2012 - 17:53:26)
>
> Board: MX53 LOCO
> I2C: ready
> DRAM: 1 GiB
> WARNING: Caches not enabled
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> In: serial
> Out: serial
> Err: serial
> CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
> Reset cause: POR
> Net: FEC
> Warning: failed to set MAC address
>
> Hit any key to stop autoboot: 0
> MX53LOCO U-Boot >
>
> And the patch now looks like:
>
I do not see pmic_dialog.c and where the constants for dialog are
definded. Have I missed another patch ?
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the U-Boot
mailing list