[U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case

[Stefano Babic]

On 13/03/2012 18:26, Fabio Estevam wrote:
> After booting mx6qsabrelite from POR the following is reported:
> 
> CPU:   Freescale i.MX61 family rev1.0 at 792 MHz                                
> Reset cause: unknown reset
> 
> This is because both the POR and WDOG bits are set after reset.
> 
> Fix this by also checking both bits in the POR case.  
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================