[U-Boot] [PATCH v2 00/19] updates for keymile arm boards

[Prafulla Wadaskar]

> -----Original Message-----
> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> Sent: 27 March 2012 19:02
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH v2 00/19] updates for keymile arm boards
> 
> Prafulla,
> 
> On 03/26/2012 01:34 PM, Valentin Longchamp wrote:
> > This patch series updates keymile boards with Kirkwood CPU and adds
> > two new boards. This new boards are kmnusa and kmcoge5un. Also the
> > existing boards with own config files were migrated to the common
> > header km_kirkwood.h. Some small adaption in generic kirkwood code
> > was needed due to two new features on the new board. First one is
> > that the u-boot environment is in the SPI NOR flash and the second
> one
> > is the direct MAC/MAC connection from the mvgbe interface to an
> > simple switch.
> >
> > Changes for v2:
> > 	- removed the two patches "spi/kirkwood: add weak functions
> > 	board_spi_bus_claim/release" and "mvgbe: remove warning for
> > 	unused methods" from the series as they are were independent from
> > 	it. The series is however dependent of these two patches.
> >
> > Holger Brunck (13):
> >   arm/km: add board type to boards.cfg
> >   arm/km: add piggy mac adress offset for mgcoge3un
> >   arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
> >   arm/km: use ARRAY_SIZE macro
> >   arm/km: fix wrong comment in SDRAM config for mgcoge3un
> >   arm/km: change maintainer for mgcoge3un
> >   arm/km: remove CONFIG_RESET_PHY_R
> >   km/arm: remove spi toggle command
> >   arm/km: add kmnusa board support
> >   arm/km: add kmcoge5un board support
> >   arm/km: convert mgcoge3un target to km_kirkwood
> >   arm/km: remove portl2.h and use km_kirkwood instead
> >   arm/km: cleanup km_kirkwood boards
> >
> > Valentin Longchamp (6):
> >   arm/km: enable mii cmd
> >   arm/km: use correct kw_gpio function for NAND/SPI switching
> >   arm/km: implement weak function board_spi_clam_bus/release
> >   arm/kirkwood: protect the ENV_SPI #defines
> >   arm/km: correct init of 88e6352 switch in the reset_phy function
> >   arm/km: enable BOCO2 FPGA download support
> >
> >  MAINTAINERS                                 |    4 +-
> >  arch/arm/include/asm/arch-kirkwood/config.h |   12 +-
> >  board/keymile/common/common.h               |   12 +
> >  board/keymile/km_arm/128M16-1.cfg           |  290
> ++++++++++++++++++++++++++
> >  board/keymile/km_arm/256M8-1.cfg            |  292
> +++++++++++++++++++++++++++
> >  board/keymile/km_arm/Makefile               |    8 +
> >  board/keymile/km_arm/fpga_config.c          |  212
> +++++++++++++++++++
> >  board/keymile/km_arm/km_arm.c               |  119 +++++++-----
> >  board/keymile/km_arm/kwbimage-memphis.cfg   |    2 +-
> >  board/keymile/km_arm/managed_switch.c       |  166 +++++++++++++++
> >  boards.cfg                                  |   10 +-
> >  include/configs/km/km_arm.h                 |   60 ++++--
> >  include/configs/km_kirkwood.h               |  157 +++++++++++++--
> >  include/configs/mgcoge3un.h                 |   86 --------
> >  include/configs/portl2.h                    |   85 --------
> >  15 files changed, 1256 insertions(+), 259 deletions(-)
> >  create mode 100644 board/keymile/km_arm/128M16-1.cfg
> >  create mode 100644 board/keymile/km_arm/256M8-1.cfg
> >  create mode 100644 board/keymile/km_arm/fpga_config.c
> >  create mode 100644 board/keymile/km_arm/managed_switch.c
> >  delete mode 100644 include/configs/mgcoge3un.h
> >  delete mode 100644 include/configs/portl2.h
> >
> 
> We would love to get a feedback from you about this series. The merge
> window for
> 2012.06 is soon over and we would like to see these in the marvell
> tree before
> your pull request for this merge window (I guess you have a pull
> request planned
> for the current merge window ?)

Since you have posted patched within/before merge window closure, those are eligible to go on master branch.
So don't worry, I will review them.

Regards..
Prafulla . . .
 
> 
> Best Regards
> 
> --
> Valentin Longchamp
> Embedded Software Engineer
> Hardware and Chip Integration
> ______________________________________
> KEYMILE AG
> Schwarzenburgstr. 73
> CH-3097 Liebefeld
> Phone +41 31 377 1318
> Fax   +41 31 377 1212
> valentin.longchamp at keymile.com
> www.keymile.com
> ______________________________________
> KEYMILE: A Specialist as a Partner