[U-Boot] [PATCH 01/13] FEC: Abstract out register setup

Marek Vasut marex at denx.de
Tue May 1 23:03:40 CEST 2012


Abstract out common register setup. This also configured r_cntrl
to correct value at registration time.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Detlev Zundel <dzu at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Stefano Babic <sbabic at denxde>
Cc: Wolfgang Denk <wd at denx.de>
---
 drivers/net/fec_mxc.c |   84 ++++++++++++++++++++++---------------------------
 1 file changed, 38 insertions(+), 46 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index d8db9f0..04750c5 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -398,6 +398,42 @@ static void fec_eth_phy_config(struct eth_device *dev)
 #endif
 }
 
+/*
+ * Do initial configuration of the FEC registers
+ */
+static void fec_reg_setup(struct fec_priv *fec)
+{
+	uint32_t rcntrl;
+
+	/*
+	 * Set interrupt mask register
+	 */
+	writel(0x00000000, &fec->eth->imask);
+
+	/*
+	 * Clear FEC-Lite interrupt event register(IEVENT)
+	 */
+	writel(0xffffffff, &fec->eth->ievent);
+
+
+	/*
+	 * Set FEC-Lite receive control register(R_CNTRL):
+	 */
+
+	/* Start with frame length = 1518, common for all modes. */
+	rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
+	if (fec->xcv_type == SEVENWIRE)
+		rcntrl |= FEC_RCNTRL_FCE;
+	else if (fec->xcv_type == RGMII)
+		rcntrl |= FEC_RCNTRL_RGMII;
+	else if (fec->xcv_type == RMII)
+		rcntrl |= FEC_RCNTRL_RMII;
+	else	/* MII mode */
+		rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE;
+
+	writel(rcntrl, &fec->eth->r_cntrl);
+}
+
 /**
  * Start the FEC engine
  * @param[in] dev Our device to handle
@@ -512,7 +548,6 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
 {
 	struct fec_priv *fec = (struct fec_priv *)dev->priv;
 	uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
-	uint32_t rcntrl;
 	uint32_t size;
 	int i, ret;
 
@@ -560,33 +595,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
 				   (unsigned)fec->rbd_base + size);
 	}
 
-	/*
-	 * Set interrupt mask register
-	 */
-	writel(0x00000000, &fec->eth->imask);
-
-	/*
-	 * Clear FEC-Lite interrupt event register(IEVENT)
-	 */
-	writel(0xffffffff, &fec->eth->ievent);
-
-
-	/*
-	 * Set FEC-Lite receive control register(R_CNTRL):
-	 */
-
-	/* Start with frame length = 1518, common for all modes. */
-	rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
-	if (fec->xcv_type == SEVENWIRE)
-		rcntrl |= FEC_RCNTRL_FCE;
-	else if (fec->xcv_type == RGMII)
-		rcntrl |= FEC_RCNTRL_RGMII;
-	else if (fec->xcv_type == RMII)
-		rcntrl |= FEC_RCNTRL_RMII;
-	else	/* MII mode */
-		rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE;
-
-	writel(rcntrl, &fec->eth->r_cntrl);
+	fec_reg_setup(fec);
 
 	if (fec->xcv_type == MII10 || fec->xcv_type == MII100)
 		fec_mii_setspeed(fec);
@@ -933,24 +942,7 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr)
 		udelay(10);
 	}
 
-	/*
-	 * Set interrupt mask register
-	 */
-	writel(0x00000000, &fec->eth->imask);
-
-	/*
-	 * Clear FEC-Lite interrupt event register(IEVENT)
-	 */
-	writel(0xffffffff, &fec->eth->ievent);
-
-	/*
-	 * Set FEC-Lite receive control register(R_CNTRL):
-	 */
-	/*
-	 * Frame length=1518; MII mode;
-	 */
-	writel((PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT) | FEC_RCNTRL_FCE |
-		FEC_RCNTRL_MII_MODE, &fec->eth->r_cntrl);
+	fec_reg_setup(fec);
 	fec_mii_setspeed(fec);
 
 	if (dev_id == -1) {
-- 
1.7.10



More information about the U-Boot mailing list