May 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue May 1 01:37:55 CEST 2012
Ending: Thu May 31 23:45:29 CEST 2012
Messages: 1962

• [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Tom Rini
• [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Marek Vasut
• [U-Boot] USB ethernet on Panda   Gary Thomas
• [U-Boot] USB ethernet on Panda   Gary Thomas
• [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Tom Rini
• [U-Boot] [PATCH] mxs-i2c: Fix internal address byte order   Marek Vasut
• [U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config   Vikram Narayanan
• [U-Boot] [PATCH v3] patman: Handle creation of patman config   Vikram Narayanan
• [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM   Mike Frysinger
• [U-Boot] [PATCH v3] patman: Handle creation of patman config   Simon Glass
• [U-Boot] [PATCH] USB: S5P: Add ehci support   Rajeshwari Shinde
• [U-Boot] [PATCH 0/2] Generalise dns325 support and include dns320   Jamie Lentin
• [U-Boot] [PATCH 1/2] kirkwood: Rename dns325 to dnskw   Jamie Lentin
• [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320   Jamie Lentin
• [U-Boot] Question about U-Boot env variable substitution   David Aldrich
• [U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories   Daniel Schwierzeck
• [U-Boot] Question about U-Boot env variable substitution   David Aldrich
• [U-Boot] Question about U-Boot env variable substitution   Wolfgang Denk
• [U-Boot] [PATCH V4] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH V4] i.MX6: mx6q_sabrelite: add SATA bindings   Marek Vasut
• [U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register   Marek Vasut
• [U-Boot] [PATCH V4] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 0/4] usb:gadget:composite: Support for composite gadget framework   Marek Vasut
• [U-Boot] [PATCH V5] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH] OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree   Jon Hunter
• [U-Boot] [PATCH V5] i.MX6: mx6q_sabrelite: add SATA bindings   Marek Vasut
• [U-Boot] [U-boot] Help: Tegra250 board(harmony) Ethernet driver   Allen Martin
• [U-Boot] [PATCH V5] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
• [U-Boot] [PATCH 2/2] GPIO: Implement gpio_{from, to}_string on M28EVK   Marek Vasut
• [U-Boot] [PATCH 00/13] M28EVK/i.MX28 improvements   Marek Vasut
• [U-Boot] [PATCH 01/13] FEC: Abstract out register setup   Marek Vasut
• [U-Boot] [PATCH 02/13] M28EVK: Implement support for new board V2.0   Marek Vasut
• [U-Boot] [PATCH 03/13] M28EVK: Add SD update command   Marek Vasut
• [U-Boot] [PATCH 04/13] i.MX28: Improve passing of data from SPL to U-Boot   Marek Vasut
• [U-Boot] [PATCH 05/13] i.MX28: Implement boot pads sampling and reporting   Marek Vasut
• [U-Boot] [PATCH 06/13] i.MX28: Add LCDIF register definitions   Marek Vasut
• [U-Boot] [PATCH 07/13] i.MX28: Shut down the LCD controller before reset   Marek Vasut
• [U-Boot] [PATCH 08/13] i.MX28: Add LRADC register definitions   Marek Vasut
• [U-Boot] [PATCH 09/13] i.MX28: Add LRADC init to i.MX28 SPL   Marek Vasut
• [U-Boot] [PATCH 10/13] i.MX28: Reorder battery status functions in SPL   Marek Vasut
• [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Marek Vasut
• [U-Boot] [PATCH 12/13] i.MX28: Check if WP detection is implemented at all   Marek Vasut
• [U-Boot] [PATCH 13/13] i.MX28: Avoid redefining serial_put[cs]()   Marek Vasut
• [U-Boot] [PATCH 00/13] M28EVK/i.MX28 improvements   Marek Vasut
• [U-Boot] [PATCH 00/13] M28EVK/i.MX28 improvements   Marek Vasut
• [U-Boot] [PATCH 01/13] FEC: Abstract out register setup   Marek Vasut
• [U-Boot] [PATCH 02/13] M28EVK: Implement support for new board V2.0   Marek Vasut
• [U-Boot] [PATCH 03/13] M28EVK: Add SD update command   Marek Vasut
• [U-Boot] [PATCH 04/13] i.MX28: Improve passing of data from SPL to U-Boot   Marek Vasut
• [U-Boot] [PATCH 05/13] i.MX28: Implement boot pads sampling and reporting   Marek Vasut
• [U-Boot] [PATCH 06/13] i.MX28: Add LCDIF register definitions   Marek Vasut
• [U-Boot] [PATCH 07/13] i.MX28: Shut down the LCD controller before reset   Marek Vasut
• [U-Boot] [PATCH 08/13] i.MX28: Add LRADC register definitions   Marek Vasut
• [U-Boot] [PATCH 09/13] i.MX28: Add LRADC init to i.MX28 SPL   Marek Vasut
• [U-Boot] [PATCH 10/13] i.MX28: Reorder battery status functions in SPL   Marek Vasut
• [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Marek Vasut
• [U-Boot] [PATCH 12/13] i.MX28: Check if WP detection is implemented at all   Marek Vasut
• [U-Boot] [PATCH 13/13] i.MX28: Avoid redefining serial_put[cs]()   Marek Vasut
• [U-Boot] [PATCH V4] i.MX6: mx6q_sabrelite: add SATA bindings   Marek Vasut
• [U-Boot] [PATCH] USB: S5P: Add ehci support   Marek Vasut
• [U-Boot] [PATCH] powerpc/85xx: fix NAND boot linker scripts for -fpic   Scott Wood
• [U-Boot] [PATCH V4] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH] checkpatch: warn of whitespace before semicolon at end of line.   Eric Nelson
• [U-Boot] [PATCH] checkpatch: warn of whitespace before semicolon at end of line.   Marek Vasut
• [U-Boot] [PATCH] tegra2: trivially enable 13 mhz crystal frequency   Lucas Stach
• [U-Boot] [PATCH V2] checkpatch: warn of whitespace before semicolon at end of line.   Eric Nelson
• [U-Boot] [PATCH V2] checkpatch: warn of whitespace before semicolon at end of line.   Marek Vasut
• [U-Boot] [PATCH V2] checkpatch: warn of whitespace before semicolon at end of line.   Eric Nelson
• [U-Boot] [PATCH 2/2 v8] Add support for MINI2440 (s3c2440).   Minkyu Kang
• [U-Boot] [PATCH 2/2 v9] ARM : Add support for MINI2440 (s3c2440).   Minkyu Kang
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Minkyu Kang
• [U-Boot] [PATCH] disk: generate GUID Partiton Tables   Donghwa Lee
• [U-Boot] [PATCH 0/2] Replace yaffs2 with new version   Charles Manning
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Marek Vasut
• [U-Boot] uboot and ZFS   Jorgen Lundman
• [U-Boot] Query about Address line test in POST of Uboot   Bhorania Amit
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Minkyu Kang
• [U-Boot] Can't read kernel if bad blocks are present in partition   Alexandre Gambier
• [U-Boot] U-boot Required   Amber and Sarosh
• [U-Boot] [PATCH 0/4] usb:gadget:composite: Support for composite gadget framework   Lukasz Majewski
• [U-Boot] [PATCH v2] TRATS: initialize panel_info data structure in board file   Minkyu Kang
• [U-Boot] [PATCH] Exynos: fix cpuinfo and cpu detecting   Minkyu Kang
• [U-Boot] [PATCH] LCD: support another s6e8ax0 panel type   Minkyu Kang
• [U-Boot] [PATCH] powerpc/85xx: fix NAND boot linker scripts for -fpic   Joakim Tjernlund
• [U-Boot] [PATCH v3] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Dirk Eibach
• [U-Boot] [PATCH] powerpc/p1010rdb: add readme document for p1010rdb   Shengzhou Liu
• [U-Boot] [PATCH] usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls   Lukasz Majewski
• [U-Boot] [PATCH 0/4] usb:gadget:composite: Support for composite gadget framework   Marek Vasut
• [U-Boot] [PATCH] rename EB+MCF-EV123 to its current marketing name EB+CPU5282   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] USB: S5P: Add ehci support   Rajeshwari Birje
• [U-Boot] [RESEND PATCH 0/5] usb:udc:composite: Samsung's UDC cleanup and composite gadget implementation   Lukasz Majewski
• [U-Boot] [RESEND PATCH 1/5] usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file   Lukasz Majewski
• [U-Boot] [RESEND PATCH 2/5] usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls   Lukasz Majewski
• [U-Boot] [RESEND PATCH 3/5] usb:gadget:composite USB composite gadget support   Lukasz Majewski
• [U-Boot] [RESEND PATCH 4/5] usb:gadget:composite: Support for composite at gadget.h   Lukasz Majewski
• [U-Boot] [RESEND PATCH 5/5] usb:udc:samsung Add functions for storing private gadget data in UDC driver   Lukasz Majewski
• [U-Boot] [PATCH] USB: S5P: Add ehci support   Marek Vasut
• [U-Boot] [PATCH v2] i.MX6: Add ANATOP regulator init   Dirk Behme
• [U-Boot] [RESEND PATCH 3/5] usb:gadget:composite USB composite gadget support   Marek Vasut
• [U-Boot] Porting u-boot for MPC8280 based board.   Wolfgang Denk
• [U-Boot] [PATCH V2] USB: S5P: Add ehci support   Rajeshwari Shinde
• [U-Boot] [PATCH 0/5] exynos5: usb: Enable USB 2.0 support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Rajeshwari Shinde
• [U-Boot] [PATCH 2/5] exynos5: Add structure for PMU register   Rajeshwari Shinde
• [U-Boot] [PATCH 3/5] exynos5: Add power Enable/Disable for USB-EHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 4/5] exynos5: usb: Fix incorrect USB base addresses   Rajeshwari Shinde
• [U-Boot] [PATCH 5/5] exynos5: usb: Enable USB 2.0 on smdk5250   Rajeshwari Shinde
• [U-Boot] uboot and ZFS   Wolfgang Denk
• [U-Boot] [PATCH] USB: ehci-mx6: Fix broken IO access   Wolfgang Grandegger
• [U-Boot] [PATCH] tegra2: trivially enable 13 mhz crystal frequency   Stephen Warren
• [U-Boot] [PATCH] USB: ehci-mx6: Fix broken IO access   Fabio Estevam
• [U-Boot] [RESEND++ PATCH 3/5] usb:gadget:composite USB composite gadget support   Lukasz Majewski
• [U-Boot] [RESEND++ PATCH 3/5] usb:gadget:composite USB composite gadget support   Marek Vasut
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Marek Vasut
• [U-Boot] [PATCH] mx28evk: add NAND support   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: add NAND support   Marek Vasut
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Scott Wood
• [U-Boot] [PATCH] powerpc/p1010rdb: add readme document for p1010rdb   Scott Wood
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320   Luka Perkov
• [U-Boot] USB on mx53loco   Fabio Estevam
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Joakim Tjernlund
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Luka Perkov
• [U-Boot] [PATCH] USB: ehci-mx6: Fix broken IO access   Wolfgang Grandegger
• [U-Boot] USB on mx53loco   Wolfgang Grandegger
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Scott Wood
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Joakim Tjernlund
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Gabriel Huau
• [U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Scott Wood
• [U-Boot] [PATCH 2/2 v10] ARM : Add support for MINI2440 (s3c2440).   Gabriel Huau
• [U-Boot] [PATCH 1/2 v5] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Gabriel Huau
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Scott Wood
• [U-Boot] USB on mx53loco   stefano babic
• [U-Boot] [PATCH] mx28evk: add NAND support   stefano babic
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Marek Vasut
• [U-Boot] [PATCH 2/3] M28: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Marek Vasut
• [U-Boot] [PATCH] M28: Enable FDT support   Marek Vasut
• [U-Boot] USB on mx53loco   Fabio Estevam
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Fabio Estevam
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Marek Vasut
• [U-Boot] "make menuconfig" does not work   Marek Vasut
• [U-Boot] [PATCH 0/3] Initialisation Sequence Framework   Marek Vasut
• [U-Boot] [PATCH 1/3] init_func: Add fundamental framework   Marek Vasut
• [U-Boot] msm7630 mainline request   Marek Vasut
• [U-Boot] U-boot Required   Marek Vasut
• [U-Boot] uboot and ZFS   Marek Vasut
• [U-Boot] [PATCH] tegra2: trivially enable 13 mhz crystal frequency   Marek Vasut
• [U-Boot] [PATCH] misc:pmic:trats: Correct procedure of enabling/disabling USB regulators   Minkyu Kang
• [U-Boot] [PATCH] Add gc-section support for ARM   Charles Manning
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Kyungmin Park
• [U-Boot] [PATCH 0/5] exynos5: usb: Enable USB 2.0 support   Kyungmin Park
• [U-Boot] [PATCH 1/1] fat: FAT sector offsets overflow on large disks and/or FAT partitions   Aaron Williams
• [U-Boot] [PATCH 0/5] exynos5: usb: Enable USB 2.0 support   Marek Vasut
• [U-Boot] [PATCH] checkpatch: warn of whitespace before semicolon at end of line.   Mike Frysinger
• [U-Boot] [PATCH 1/3] init_func: Add fundamental framework   Graeme Russ
• [U-Boot] [PATCH] powerpc/85xx: fix NAND boot linker scripts for -fpic   Chunhe Lan
• [U-Boot] [PATCH 1/3] init_func: Add fundamental framework   Marek Vasut
• [U-Boot] [PATCH] checkpatch: warn of whitespace before semicolon at end of line.   Eric Nelson
• [U-Boot] [PATCH] checkpatch: add check for whitespace before semicolon at end-of-line   Eric Nelson
• [U-Boot] [PATCH] checkpatch: add check for whitespace before semicolon at end-of-line   Joe Perches
• [U-Boot] [PATCH] misc:pmic:trats: Correct procedure of enabling/disabling USB regulators   Minkyu Kang
• [U-Boot] [PATCH 1/3] init_func: Add fundamental framework   Graeme Russ
• [U-Boot] Porting u-boot for MPC8280 based board.   Thirumalesha N
• [U-Boot] uboot and ZFS   Jorgen Lundman
• [U-Boot] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Chander Kashyap
• [U-Boot] [PATCH 2/5] exynos5: Add structure for PMU register   Chander Kashyap
• [U-Boot] [PATCH 2/5] exynos5: Add structure for PMU register   Chander Kashyap
• [U-Boot] [PATCH 4/5] exynos5: usb: Fix incorrect USB base addresses   Chander Kashyap
• [U-Boot] [PATCH 5/5] exynos5: usb: Enable USB 2.0 on smdk5250   Chander Kashyap
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Minkyu Kang
• [U-Boot] [PATCH 3/5] exynos5: Add power Enable/Disable for USB-EHCI   Minkyu Kang
• [U-Boot] [PATCH 5/5] exynos5: usb: Enable USB 2.0 on smdk5250   Minkyu Kang
• [U-Boot] [PATCH V2] USB: S5P: Add ehci support   Minkyu Kang
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Detlev Zundel
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Detlev Zundel
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Schneider, Kolja
• [U-Boot] Porting u-boot for MPC8280 based board.   Wolfgang Denk
• [U-Boot] [PATCH] DHCP: fix dhcp command parameters overwrite issue   Bo Shen
• [U-Boot] Porting u-boot for MPC8280 based board.   Thirumalesha N
• [U-Boot] [PATCH v2] powerpc/p1010rdb: add readme document for p1010rdb   Shengzhou Liu
• [U-Boot] [PATCH 5/5] exynos5: usb: Enable USB 2.0 on smdk5250   Rajeshwari Birje
• [U-Boot] [PATCH V2] USB: S5P: Add ehci support   Rajeshwari Birje
• [U-Boot] [PATCH 1/5] exynos5: Add system register structure   Rajeshwari Birje
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Joakim Tjernlund
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Joakim Tjernlund
• [U-Boot] [PATCH 3/5] exynos5: Add power Enable/Disable for USB-EHCI   Rajeshwari Birje
• [U-Boot] [PATCH v2] powerpc/p1010rdb: add readme document for p1010rdb   Wolfgang Denk
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Wolfgang Denk
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Marek Vasut
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Marek Vasut
• [U-Boot] Default LAWBAR mapping at reset for mpc85xx?   Joakim Tjernlund
• [U-Boot] [PATCH] checkpatch: add check for whitespace before semicolon at end-of-line   Eric Nelson
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Detlev Zundel
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Detlev Zundel
• [U-Boot] [PATCH 1/3] init_func: Add fundamental framework   Marek Vasut
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Marek Vasut
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Marek Vasut
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Marek Vasut
• [U-Boot] [PATCH 1/4 V2] Revert "i.MX28: Enable additional DRAM address bits"   Marek Vasut
• [U-Boot] [PATCH 2/4 RESEND] M28: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared   Marek Vasut
• [U-Boot] [PATCH 4/4] M28: Enable FDT support   Marek Vasut
• [U-Boot] [PATCH] checkpatch: add check for whitespace before semicolon at end-of-line   Joe Perches
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH] DHCP: fix dhcp command parameters overwrite issue   Wolfgang Denk
• [U-Boot] [PATCH 1/4] powerpc/P4080: Check SVR for CPU22 workaround   York Sun
• [U-Boot] [PATCH 2/4] powerpc/mpc85xx: Ignore E bit for SVR_SOC_VER()   York Sun
• [U-Boot] [PATCH 3/4] powerpc/mpc85xx: Workaround for erratum CPU_A011   York Sun
• [U-Boot] [PATCH 4/4] powerpc/mpc85xx: Fix Handling the lack of L2 cache on P2040/P2040E   York Sun
• [U-Boot] [PATCH v2 4/5] Add Support for qc_mmc MMC Controller   Andy Fleming
• [U-Boot] [PATCH] DHCP: fix dhcp command parameters overwrite issue   voice shen
• [U-Boot] [PATCH] powerpc/p1010rdb: add readme document for p1010rdb   Shengzhou Liu
• [U-Boot] [PATCH v4 1/3]: LCD: display 32bpp decompressed bitmap image   Donghwa Lee
• [U-Boot] [PATCH v4 2/3]: create lib/tizen directory   Donghwa Lee
• [U-Boot] [PATCH v3 3/3]: EXYNOS: display 32bpp bitmap TIZEN logo   Donghwa Lee
• [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2] exynos: smdk5250: Enable the pinmux setup   Rajeshwari Shinde
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] [PATCH v2 4/6] km/common: add support for second flash   Holger Brunck
• [U-Boot] [PATCH 0/6] further updates for keymile powerpc 83xx boards   Holger Brunck
• [U-Boot] [PATCH 1/6] km/common: fixed error in ethaddr (1-byte-shift)   Holger Brunck
• [U-Boot] [PATCH 2/6] km/common: increase bootlimit to 3   Holger Brunck
• [U-Boot] [PATCH 3/6] powerpc/83xx/km: added missing enable of application buffer   Holger Brunck
• [U-Boot] [PATCH 4/6] powerpc/83xx: configure CONFIG_POST for kmcoge5ne   Holger Brunck
• [U-Boot] [PATCH 5/6] powerpc/83xx/km: readout dip_switch on kmcoge5ne   Holger Brunck
• [U-Boot] [PATCH 6/6] km/common: check test_bank and testpin for testboot   Holger Brunck
• [U-Boot] [PATCH 1/3] Revert "i.MX28: Enable additional DRAM address bits"   Detlev Zundel
• [U-Boot] [PATCH 3/3] i.MX28: Increase the delay after DRAM init   Detlev Zundel
• [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared   Detlev Zundel
• [U-Boot] [PATCH v3 13/19] arm/km: add kmnusa board support   Holger Brunck
• [U-Boot] [PATCH v3 14/19] arm/km: add kmcoge5un board support   Holger Brunck
• [U-Boot] [PATCH RESEND] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue   Igor Grinberg
• [U-Boot] ETH RBPTR incorrect mapping for rtx volatile structure   BUGNIOT Geoffrey
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] [PATCH V3] USB: EXYNOS: Add ehci support   Rajeshwari Shinde
• [U-Boot] [PATCH V3] USB: EXYNOS: Add ehci support   Chander Kashyap
• [U-Boot] [PATCH] davinci: added Marvell 88E1111 PHY support   Brilliantov Kirill Vladimirovich
• [U-Boot] [PATCH v5 03/10] input: Add generic keyboard input handler   Simon Glass
• [U-Boot] [PATCH 0/6 V2] EXYNOS5: USB: Enable USB 2.0 support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/6 V2] EXYNOS5: Fix system register structure   Rajeshwari Shinde
• [U-Boot] [PATCH 2/6 V2] EXYNOS: Add structure for PMU registers   Rajeshwari Shinde
• [U-Boot] [PATCH 3/6 V2] EXYNOS5 : USB: Set USB 2.0 HOST Link mode   Rajeshwari Shinde
• [U-Boot] [PATCH 4/6 V2] Exynos5: Add power Enable/Disable for USB-EHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 5/6 V2] EXYNOS5: USB: Fix incorrect USB base addresses   Rajeshwari Shinde
• [U-Boot] [PATCH 6/6 V2] config: EXYNOS5: USB: Enable USB 2.0 on smdk5250   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared   Marek Vasut
• [U-Boot] [PATCH 0/6 V2] EXYNOS5: USB: Enable USB 2.0 support   Marek Vasut
• [U-Boot] [PATCH] OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree   R, Sricharan
• [U-Boot] Getting into u-boot (targetting pc7448)   Frédéric LOCHON
• [U-Boot] [PATCH] i.MX28: Add delay after CPU bypass is cleared   Marek Vasut
• [U-Boot] No MAC address assigns on OpenRD, connected with [PATCH 2/2] mvgbe: fix network device indices   Anton Vasilyev
• [U-Boot] [PATCH] DHCP: fix dhcp command parameters overwrite issue   Wolfgang Denk
• [U-Boot] [PATCH 0/6] further updates for Keymile ARM boards   Holger Brunck
• [U-Boot] [PATCH 1/6] arm/km: add support for external switch configuration   Holger Brunck
• [U-Boot] [PATCH 2/6] arm/km: enable external switch configuration for kmnusa   Holger Brunck
• [U-Boot] [PATCH 3/6] arm/km: skip FPGA config when already configured   Holger Brunck
• [U-Boot] [PATCH 4/6] arm/km: support the 2 PCIe fpga resets   Holger Brunck
• [U-Boot] [PATCH 5/6] arm/km: add implementation for read_dip_switch   Holger Brunck
• [U-Boot] [PATCH 6/6] arm/km: fix testpin detection for kmcoge5un   Holger Brunck
• [U-Boot] [PATCH] OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree   Jon Hunter
• [U-Boot] [PATCH] OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree   Jon Hunter
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH V2] checkpatch: add check for whitespace before semicolon at end-of-line   Eric Nelson
• [U-Boot] [PATCH 1/3] mx5: Add clock config interface   Fabio Estevam
• [U-Boot] [PATCH V2] checkpatch: add check for whitespace before semicolon at end-of-line   Joe Perches
• [U-Boot] [PATCH 3/3] omap4: do not enable auxiliary cores   R, Sricharan
• [U-Boot] [PATCH] davinci: added Marvell 88E1111 PHY support   Tom Rini
• [U-Boot] [PATCH v5 04/10] input: Add support for keyboard matrix decoding from an fdt   Simon Glass
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Albert ARIBAUD
• [U-Boot] [PATCH v3] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Timur Tabi
• [U-Boot] [PATCH] tegra: override compiler flags for cmd_nvedit   Allen Martin
• [U-Boot] [PATCH 1/6] powerpc/85xx: minor clean-ups to the P2020DS board header file   Timur Tabi
• [U-Boot] [PATCH 2/6] powerpc/85xx: fdt_set_phy_handle() should return an error code   Timur Tabi
• [U-Boot] [PATCH 3/6] powerpc/85xx: clean up P1022DS board configuration header file   Timur Tabi
• [U-Boot] [PATCH 4/6] lib/powerpc: addrmap_phys_to_virt() should return a pointer   Timur Tabi
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 6/6] powerpc/85xx: p1022ds: use the saveenv board preparation functions   Timur Tabi
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Troy Kisky
• [U-Boot] [PATCH] arm,davinci: update for enbw_cmc board   Heiko Schocher
• [U-Boot] [PATCH] davinci: added Marvell 88E1111 PHY support   Brilliantov Kirill Vladimirovich
• [U-Boot] [PATCH 1/3] omap4: panda: disable uart2 pads during boot   R, Sricharan
• [U-Boot] [PATCH 2/3] omap4: do not enable fs-usb module   R, Sricharan
• [U-Boot] [PATCH 2/3] omap4: do not enable fs-usb module   R, Sricharan
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
• [U-Boot] uboot and ZFS   Marek Vasut
• [U-Boot] mpc85xx: Memory diagnostics run with cache enabled?   Rajat Jain
• [U-Boot] [PATCH] tegra: override compiler flags for cmd_nvedit   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Troy Kisky
• [U-Boot] USB on mx53loco   Fabio Estevam
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Troy Kisky
• [U-Boot] [PATCH] openrisc: Work around potential relocation issues   Julius Baxter
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Marek Vasut
• [U-Boot] [PATCH 2/3] mx6qsabrelite: add i2c support   Stefano Babic
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Stefano Babic
• [U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file   Stefano Babic
• [U-Boot] USB on mx53loco   Stefano Babic
• [U-Boot] [PATCH 2/3] mx53loco: Allow to print CPU information at a later stage   Stefano Babic
• [U-Boot] [PATCH 3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards   Stefano Babic
• [U-Boot] [PATCH 3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards   Stefano Babic
• [U-Boot] [PATCH 1/3] mx5: Add clock config interface   Stefano Babic
• [U-Boot] [PATCH 2/3] mx53loco: Allow to print CPU information at a later stage   Stefano Babic
• [U-Boot] [PATCH 4/4] M28: Enable FDT support   Stefano Babic
• [U-Boot] [PATCH 4/4] M28: Enable FDT support   Marek Vasut
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Stefano Babic
• [U-Boot] [PATCH 4/4] M28: Enable FDT support   Stefano Babic
• [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared   Stefano Babic
• [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared   Marek Vasut
• [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board   Thirumalesha N
• [U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk()   Fabio Estevam
• [U-Boot] [PATCH] USB: ehci-mx6: Fix broken IO access   Stefano Babic
• [U-Boot] [PATCH] i.MX28: Add delay after CPU bypass is cleared   Stefano Babic
• [U-Boot] [PATCH] i.MX28: Add delay after CPU bypass is cleared   Marek Vasut
• [U-Boot] [PATCH 4/4] M28: Enable FDT support   Marek Vasut
• [U-Boot] [PATCH] mx28evk: add NAND support   Stefano Babic
• [U-Boot] [PATCH v2] i.MX6: Add ANATOP regulator init   Stefano Babic
• [U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock()   Stefano Babic
• [U-Boot] [PATCH V5] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH V5] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH V4 2/8] i.MX25: This architecture has a GPIO4 too   Stefano Babic
• [U-Boot] [PATCH V4 4/8] imx: nand: Support flash based BBT   Stefano Babic
• [U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register   Stefano Babic
• [U-Boot] [PATCH V4 6/8] imx: usb: There is no such register   Stefano Babic
• [U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h   Stefano Babic
• [U-Boot] [PATCH V4 1/8] i.MX25: esdhc: Add mxc_get_clock infrastructure   Stefano Babic
• [U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock()   Eric Nelson
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   David Purdy
• [U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock()   Fabio Estevam
• [U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock()   Eric Nelson
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT   Nobuhiro Iwamatsu
• [U-Boot] ETH RBPTR incorrect mapping for rtx volatile structure   BUGNIOT Geoffrey
• [U-Boot] [PATCH 0/6 V2] EXYNOS5: USB: Enable USB 2.0 support   Lukasz Majewski
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH V2 0/4] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH V2 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V2 3/4] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V2 4/4] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 00/12] mtd/SMI: Add support for ST SMI controller   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 01/12] st_smi: Add support for SPEAr SMI driver   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 02/12] st_smi: Return error in case TFF is not set   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 03/12] st_smi: Change SMI timeout values   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 04/12] st_smi: Enhance the error handling   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 05/12] st_smi: Read status until timeout happens   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 06/12] st_smi: Move status register read before modifying ctrl register   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 07/12] st_smi: Fix smi read status   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 08/12] st_smi: Removed no needed dependency on ST_M25Pxx_ID   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 09/12] st_smi: Change the flash probing method   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 10/12] st_smi: Fix bug in flash_print_info()   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 11/12] st_smi: Change timeout loop implementation   Amit Virdi
• [U-Boot] [PATCH V1 RESEND 12/12] st_smi: Fixed page size for Winbond W25Q128FV flash   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 00/24] SPEAr: Update platform support for SPEAr3xx/6xx   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 01/24] SPEAr: Fix ARM relocation support   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 02/24] SPEAr: Eliminate dependency on Xloader table   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 03/24] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 04/24] SPEAr: Configure network support for spear SoCs   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 05/24] SPEAr: Add macb driver support for spear310 and spear320   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 06/24] SPEAr: Add interface information in initialization   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 07/24] SPEAr: Add basic arch related support for SPEAr SoCs   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 08/24] SPEAr: Add configuration options for spear3xx and spear6xx boards   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 09/24] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 10/24] SPEAr: Change the default environment variables   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 11/24] SPEAr: Initialize SNOR in early_board_init_f   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 12/24] SPEAr: Enable usb device high speed support   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 13/24] SPEAr: Enable udc and usb-console support only for usbtty configuration   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 14/24] SPEAr: Enable autoneg for ethernet   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 15/24] SPEAr: Enable dcache for fast file transfer   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 16/24] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 17/24] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 18/24] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 19/24] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 20/24] SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 21/24] SPEAr: explicitly select clk src for UART   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 22/24] SPEAr: Correct SoC ID offset in misc configuration space   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 23/24] cleanup/SPEAr: Remove unnecessary parenthesis   Amit Virdi
• [U-Boot] [PATCH V2 RESEND 24/24] cleanup/SPEAr: Define configuration flags more elegantly   Amit Virdi
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Holger Brunck
• [U-Boot] [PATCH V2 0/4] mtd/NAND: Support for FSMC controller   Stefan Roese
• [U-Boot] [PATCH 1/3] omap4: panda: disable uart2 pads during boot   Tero Kristo
• [U-Boot] uboot and ZFS   Matthias Weißer
• [U-Boot] [PATCH 1/3] omap4: panda: disable uart2 pads during boot   R, Sricharan
• [U-Boot] [PATCH] i.MX28: Add delay after CPU bypass is cleared   Detlev Zundel
• [U-Boot] [PATCH v3] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Eibach, Dirk
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Stefan Roese
• [U-Boot] uboot and ZFS   Wolfgang Denk
• [U-Boot] Subject: [PATCH] libfdt: Add fdt functionality for more intuitive fdt handling   Peter Feuerer
• [U-Boot] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH v4] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Dirk Eibach
• [U-Boot] [PATCH - resend due to bounce] libfdt: Add fdt functionality for more intuitive   Peter Feuerer
• [U-Boot] [PATCH] mxs-i2c: Fix internal address byte order   Torsten Fleischer
• [U-Boot] [PATCH] mx28evk: Add I2C support   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Add I2C support   Marek Vasut
• [U-Boot] [PATCH] mxs-i2c: Fix internal address byte order   Marek Vasut
• [U-Boot] nand_get_device() and nand_release_device()   Timur Tabi
• [U-Boot] Console over USB on AT91sam9261ek   Sandro Brandt
• [U-Boot] [PATCH] tegra: override compiler flags for cmd_nvedit   Allen Martin
• [U-Boot] v2 patch with a change in 2/4   York Sun
• [U-Boot] [Patch v2 1/4] powerpc/P4080: Check SVR for CPU22 workaround   York Sun
• [U-Boot] [Patch v2 2/4] powerpc/mpc85xx: Ignore E bit for SVR_SOC_VER()   York Sun
• [U-Boot] [Patch v2 3/4] powerpc/mpc85xx: Workaround for erratum CPU_A011   York Sun
• [U-Boot] [Patch v2 4/4] powerpc/mpc85xx: Fix Handling the lack of L2 cache on P2040/P2040E   York Sun
• [U-Boot] [Patch v2 4/4] powerpc/mpc85xx: Fix Handling the lack of L2 cache on P2040/P2040E   York Sun
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Tom Warren
• [U-Boot] [PATCH 1/3] pmic: dialog: Avoid name conflicts   Fabio Estevam
• [U-Boot] [PATCH 2/4] mx53loco: Add mc34708 support and set mx53 frequency at 1GHz   Fabio Estevam
• [U-Boot] [PATCH 3/4] mx53loco: Turn on VUSB regulator   Fabio Estevam
• [U-Boot] [PATCH 4/4] mx53loco: Add CONFIG_REVISION_TAG   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Remove unneeded gpio_set_value()   Fabio Estevam
• [U-Boot] [PATCH] mx5: Add workaround for ARM erratum ID 468414   Fabio Estevam
• [U-Boot] [U-BOOT][PATCH] mmc: remove the hard setting for tran_speed   Andy Fleming
• [U-Boot] [PATCH] mmc: support the revision check for eMMC4.5   Andy Fleming
• [U-Boot] [PATCH] davinci: added Marvell 88E1111 PHY support   Tom Rini
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Tom Rini
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [PATCH 0/6 V2] EXYNOS5: USB: Enable USB 2.0 support   Marek Vasut
• [U-Boot] [PATCH 3/6 V2] EXYNOS5 : USB: Set USB 2.0 HOST Link mode   Minkyu Kang
• [U-Boot] [PATCH 1/1] fat: FAT sector offsets overflow on large disks and/or FAT partitions   Aaron Williams
• [U-Boot] [PATCH 4/6 V2] Exynos5: Add power Enable/Disable for USB-EHCI   Minkyu Kang
• [U-Boot] [PATCH 1/6 V2] EXYNOS5: Fix system register structure   Minkyu Kang
• [U-Boot] [PATCH 2/6 V2] EXYNOS: Add structure for PMU registers   Minkyu Kang
• [U-Boot] [PATCH 5/6 V2] EXYNOS5: USB: Fix incorrect USB base addresses   Minkyu Kang
• [U-Boot] [PATCH 6/6 V2] config: EXYNOS5: USB: Enable USB 2.0 on smdk5250   Minkyu Kang
• [U-Boot] [PATCH 6/6 V2] config: EXYNOS5: USB: Enable USB 2.0 on smdk5250   Marek Vasut
• [U-Boot] [PATCH] arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx   Matt Porter
• [U-Boot] [U-BOOT][PATCH] mmc: remove the hard setting for tran_speed   Jaehoon Chung
• [U-Boot] [PATCH] mmc: support the revision check for eMMC4.5   Jaehoon Chung
• [U-Boot] [PATCH 0/6 V2] EXYNOS5: USB: Enable USB 2.0 support   Lukasz Majewski
• [U-Boot] [PATCH v2] imx-common: Factor out get_ahb_clk()   Dirk Behme
• [U-Boot] [PATCH] GPIO: Add SPEAr GPIO driver   Stefan Roese
• [U-Boot] [PATCH] net: Multiple updates/enhancements to designware.c   Stefan Roese
• [U-Boot] [PATCH] NAND: Remove ONFI detection message to from bootup log   Stefan Roese
• [U-Boot] [PATCH 0/7] ARM: SPL: SPEAr: Add SPEAr600 X600 board with SPL support   Stefan Roese
• [U-Boot] [PATCH 1/7] arm: Don't use printf() in SPL builds   Stefan Roese
• [U-Boot] [PATCH 2/7] SPL: common/Makefile: Add image.c to SPL build   Stefan Roese
• [U-Boot] [PATCH 3/7] SPL: lib/Makefile: Add crc32.c to SPL build   Stefan Roese
• [U-Boot] [PATCH 4/7] SPL: ARM: spear: Remove some objects from SPL build   Stefan Roese
• [U-Boot] [PATCH 5/7] Makefile: Add u-boot.spr build target (SPEAr)   Stefan Roese
• [U-Boot] [PATCH 6/7] SPL: ARM: spear: Add SPL support for SPEAr600 platform   Stefan Roese
• [U-Boot] [PATCH 7/7] ARM: Add X600 board support (SPEAr600 based)   Stefan Roese
• [U-Boot] [PATCH 0/7] ARM: SPL: SPEAr: Add SPEAr600 X600 board with SPL support   Stefan Roese
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Stefano Babic
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   DrEagle
• [U-Boot] [PATCH] rtc/m41t62: Add support for M41T82 with HT (Halt Update)   Stefan Roese
• [U-Boot] [PATCH] i2c: designware_i2c.c: Add support for the "i2c probe" command   Stefan Roese
• [U-Boot] [PATCH] MTD: SPEAr SMI: Add write support for length < 4 bytes   Stefan Roese
• [U-Boot] [PATCH 4/6 V2] Exynos5: Add power Enable/Disable for USB-EHCI   Rajeshwari Birje
• [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure   Rajeshwari Shinde
• [U-Boot] [PATCH 2/6 V3] EXYNOS5: Add structure for PMU registers   Rajeshwari Shinde
• [U-Boot] [PATCH 3/6 V3] USB: EXYNOS: Set USB 2.0 HOST Link mode   Rajeshwari Shinde
• [U-Boot] [PATCH 4/6 V3] EXYNOS: Add power Enable/Disable for USB-EHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 5/6 V3] EXYNOS5: USB: Fix incorrect USB base addresses   Rajeshwari Shinde
• [U-Boot] [PATCH 6/6 V3] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250   Rajeshwari Shinde
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Marek Vasut
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Marek Vasut
• [U-Boot] [PATCH 0/6] add zip command support for uboot   Lei Wen
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Stefano Babic
• [U-Boot] Subject: [PATCH] libfdt: Add fdt functionality for more intuitive fdt handling   David Gibson
• [U-Boot] [PATCH v2 4/4] mx53loco: Add CONFIG_REVISION_TAG   Fabio Estevam
• [U-Boot] garbage in early serial output on at91sam9g20 after u-boot v2011.12   Alexander Dahl
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH] ext2load: increase read speed   Jason Cooper
• [U-Boot] [PATCH] ext2load: increase read speed   Jason Cooper
• [U-Boot] [PATCH] ext2load: increase read speed   Eric Nelson
• [U-Boot] [GIT PULL] ext2load speedup   Jason Cooper
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Hiremath, Vaibhav
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] [PATCH 0/2] patman further fixes   Vikram Narayanan
• [U-Boot] [PATCH 1/2] patman: Change the location of the config file   Vikram Narayanan
• [U-Boot] [PATCH 2/2] patman: Update README   Vikram Narayanan
• [U-Boot] [PATCH 0/2] patman further fixes   Vikram Narayanan
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Tom Rini
• [U-Boot] LCD Support on mx51 vision2   Anatolij Gustschin
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Albert ARIBAUD
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Andy Fleming
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Marek Vasut
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Andy Fleming
• [U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC   Rafael Beims
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   David Purdy
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] [U-BOOT][PATCH] mmc: remove the hard setting for tran_speed   Andy Fleming
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   David Purdy
• [U-Boot] [PATCH 2/2] SDHC/MMC: remove the member has_init   Andy Fleming
• [U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev()   Andy Fleming
• [U-Boot] LCD Support on mx51 vision2   Anatolij Gustschin
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Andy Fleming
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Eric Nelson
• [U-Boot] [PATCH] OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer   R Sricharan
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   R, Sricharan
• [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add register definition of PFC for SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add support for AP-SH4A-4A board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT   Thomas Weber
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [PATCH] net: sh-eth: Add support Gigabit of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev()   Lukasz Majewski
• [U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH 2/4] mx53loco: Add mc34708 support and set mx53 frequency at 1GHz   Liu Hui-R64343
• [U-Boot] [PATCH 3/4] mx53loco: Turn on VUSB regulator   Liu Hui-R64343
• [U-Boot] [PATCH v2 4/4] mx53loco: Add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH 2/4] mx53loco: Add mc34708 support and set mx53 frequency at 1GHz   Stefano Babic
• [U-Boot] [PATCH 3/4] mx53loco: Turn on VUSB regulator   Stefano Babic
• [U-Boot] [PATCH 1/3] pmic: dialog: Avoid name conflicts   Stefano Babic
• [U-Boot] [PATCH 4/4] mx53loco: Add CONFIG_REVISION_TAG   Liu Hui-R64343
• [U-Boot] [PATCH 2/4] mx53loco: Add mc34708 support and set mx53 frequency at 1GHz   Stefano Babic
• [U-Boot] [PATCH 3/4] mx53loco: Turn on VUSB regulator   Stefano Babic
• [U-Boot] [PATCH v2 4/4] mx53loco: Add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH 1/3] pmic: dialog: Avoid name conflicts   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Remove unneeded gpio_set_value()   Stefano Babic
• [U-Boot] garbage in early serial output on at91sam9g20 after u-boot v2011.12   Alexander Dahl
• [U-Boot] [PATCH] net: Multiple updates/enhancements to designware.c   Amit Virdi
• [U-Boot] [PATCH] NAND: Remove ONFI detection message to from bootup log   Amit Virdi
• [U-Boot] [PATCH 4/7] SPL: ARM: spear: Remove some objects from SPL build   Amit Virdi
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   David Jander
• [U-Boot] [PATCH] mx5: Add workaround for ARM erratum ID 468414   Stefano Babic
• [U-Boot] [PATCH] net: Multiple updates/enhancements to designware.c   Stefan Roese
• [U-Boot] [PATCH] mxs-i2c: Fix internal address byte order   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Stefano Babic
• [U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure   Chander Kashyap
• [U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure   Chander Kashyap
• [U-Boot] [PATCH v2 2/2] spi: mxs: Allow other chip selects to work   Stefano Babic
• [U-Boot] [PATCH v2 1/2] spi: mxs: Introduce spi_cs_is_valid()   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Hiremath, Vaibhav
• [U-Boot] [PATCH] MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged   Stefano Babic
• [U-Boot] [resent] New chapter in i.MX51 datasheet an issue?   Stefano Babic
• [U-Boot] [PATCH 1/6 V3] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH 02/13] M28EVK: Implement support for new board V2.0   Stefano Babic
• [U-Boot] [PATCH] MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged   David Jander
• [U-Boot] [PATCH 02/13] M28EVK: Implement support for new board V2.0   Marek Vasut
• [U-Boot] [PATCH 12/13] i.MX28: Check if WP detection is implemented at all   Stefano Babic
• [U-Boot] [PATCH 13/13] i.MX28: Avoid redefining serial_put[cs]()   Stefano Babic
• [U-Boot] [PATCH] MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged   Marek Vasut
• [U-Boot] [PATCH] common/cmd_bootm.c: Fix GCC 4.6 warnings   Stefano Babic
• [U-Boot] [PATCH 00/13] M28EVK/i.MX28 improvements   Stefano Babic
• [U-Boot] [PATCH 4/4] mx53loco: Add CONFIG_REVISION_TAG   Fabio Estevam
• [U-Boot] [PATCH 4/4] mx53loco: Add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   David Purdy
• [U-Boot] uboot and ZFS   Graeme Russ
• [U-Boot] [PATCH 1/2] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT   Tom Rini
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] LCD Support on mx51 vision2   Stefano Babic
• [U-Boot] LCD Support on mx51 vision2   Fabio Estevam
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] mx51evk: Add LCD support   Fabio Estevam
• [U-Boot] [PATCH] OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer   Aneesh V
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [PATCH] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   Tom Warren
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT   Tom Rini
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] silent console with nand   Bishop, Mark
• [U-Boot] [PATCH] README: Fix how to for serial console when CONFIG_CFB_CONSOLE is defined   Fabio Estevam
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   DrEagle
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Tom Warren
• [U-Boot] [PATCH] u-boot: Update yaffs2 file system   Charles Manning
• [PATCH] v5: create lib/tizen directory   Donghwa Lee
• [U-Boot] [PATCH v5 0/3] support 32bpp bitmap image drawing and TIZEN logo   Donghwa Lee
• [U-Boot] [PATCH v5 1/3] LCD: display 32bpp decompressed bitmap image   Donghwa Lee
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Donghwa Lee
• [U-Boot] [PATCH v5 3/3] EXYNOS: display 32bpp bitmap TIZEN logo   Donghwa Lee
• [U-Boot] [PATCH] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH] Improve MAKEALL parallel builds   Andy Fleming
• [U-Boot] [PATCH 0/9] split tegra arm7 code into separate SPL   Allen Martin
• [U-Boot] [PATCH 1/9] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common   Allen Martin
• [U-Boot] [PATCH 2/9] mkconfig: add support for SPL CPU   Allen Martin
• [U-Boot] [PATCH 3/9] ARM: Fix arm720t SPL build   Allen Martin
• [U-Boot] [PATCH 4/9] tegra: Add SPL build support to tegra boards   Allen Martin
• [U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t   Allen Martin
• [U-Boot] [PATCH 6/9] tegra: enable SPL build for seaboard   Allen Martin
• [U-Boot] [PATCH 7/9] tegra: add u-boot.t2 target   Allen Martin
• [U-Boot] [PATCH 8/9] tegra2: Remove CPU init code from tegra2 u-boot   Allen Martin
• [U-Boot] [PATCH 9/9] tegra2: Remove USE_PRIVATE_LIBGCC and armv4t build flags   Allen Martin
• [U-Boot] [PATCH 0/2] Support for msm7x27a board   srikanth.reddy at lntinfotech.com
• [U-Boot] [PATCH 1/2] MSM7x27a: Add support for qualcomm msm7x27a SOC.   srikanth.reddy at lntinfotech.com
• [U-Boot] [PATCH 2/2] MSM7x27a: Add support for msm7x27a surf board   srikanth.reddy at lntinfotech.com
• [U-Boot] [PATCH] sh: Add SH7269 device and RSK2+SH7269 board   Phil Edworthy
• [U-Boot] [PATCH 3/6 V3] USB: EXYNOS: Set USB 2.0 HOST Link mode   Minkyu Kang
• [U-Boot] [PATCH 4/6 V3] EXYNOS: Add power Enable/Disable for USB-EHCI   Minkyu Kang
• [U-Boot] [PATCH] mx51evk: Add LCD support   Stefano Babic
• [U-Boot] [PATCH v2 4/5] Add Support for qc_mmc MMC Controller   Mohamed Haneef
• [U-Boot] [PATCH v3 4/5] Add support for qc_mmc MMC Controller   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Fabio Estevam
• [U-Boot] [PATCH 2/2] MX28: Fix a typo in mx28_reg_8 macro   Fabio Estevam
• [U-Boot] [PATCH v5 3/3] EXYNOS: display 32bpp bitmap TIZEN logo   Minkyu Kang
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Minkyu Kang
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Marek Vasut
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v4 2/3] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH v4 3/3] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Albert ARIBAUD
• [U-Boot] [PATCH v6 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] lzma/bzip2 commands?   Aaron Williams
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Tom Warren
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Tom Rini
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Graeme Russ
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx5: Rename mx51_fb_init()   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx53loco: Add LCD support   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition   Liu Hui-R64343
• [U-Boot] [PATCH 2/3] mx5: Rename mx51_fb_init()   Liu Hui-R64343
• [U-Boot] [PATCH 3/3] mx53loco: Add LCD support   Liu Hui-R64343
• [U-Boot] [PATCH 0/3] msm7630 usb gadget and emmc support   Mohamed Haneef
• [U-Boot] [PATCH 1/3] MSM7630 Interrupt support   Mohamed Haneef
• [U-Boot] [PATCH 2/3] MSM7630 gadget usb support   Mohamed Haneef
• [U-Boot] [PATCH 3/3] board: qcom: enable high capacity eMMC cards   Mohamed Haneef
• [U-Boot] [PATCH 0/2] This patch series contains support for interrupt and USB gadget in MSM7x27a surf board   Srikanth Reddy Vintha
• [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt   Srikanth Reddy Vintha
• [U-Boot] [PATCH 2/2] MSM7x27a:Add support for USB gadget   Srikanth Reddy Vintha
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition   Stefano Babic
• [U-Boot] Unable to use USB Keyboard on u-boot   Marek Vasut
• [U-Boot] Unable to use USB Keyboard on u-boot   Marek Vasut
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320   Jamie Lentin
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Marek Vasut
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Stefano Babic
• [U-Boot] [PATCH 1/2] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 1/8] MX28: Fix a typo in mx28_reg_8 macro   Otavio Salvador
• [U-Boot] [PATCH 2/8] m28evk: use same notation to alloc the 128kB stack   Otavio Salvador
• [U-Boot] [PATCH 3/8] m28evk: use "M28EVK U-Boot =>" as prompt   Otavio Salvador
• [U-Boot] [PATCH 4/8] mx28evk: ensure command definition is in alphabetic order   Otavio Salvador
• [U-Boot] [PATCH 5/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 6/8] mxs: reorganize source directory for easy sharing of code among i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 7/8] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
• [U-Boot] [PATCH 8/8] MX28: rename regs-clkctrl.h to regs-clkctrl-mx28.h   Otavio Salvador
• [U-Boot] [PATCH 6/8] mxs: reorganize source directory for easy sharing of code among i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Tom Warren
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v4 0/3] net: helper functions   Joe Hershberger
• [U-Boot] [PATCH v4 0/3] net: helper functions   Prafulla Wadaskar
• [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition   Fabio Estevam
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Wolfgang Denk
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Wolfgang Denk
• [U-Boot] [PATCH v4 0/3] net: helper functions   Wolfgang Denk
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Wolfgang Denk
• [U-Boot] [PATCH v4 2/3] net: add helper to generate random mac address   Wolfgang Denk
• [U-Boot] [PATCH v4 3/3] net: add eth_setenv_enetaddr_by_index()   Wolfgang Denk
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320   Luka Perkov
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Wolfgang Denk
• [U-Boot] [PATCH] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   jimmzhang
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v2] mx28evk, m28evk: sync extra environment content   Otavio Salvador
• [U-Boot] [PATCH v4 0/3] net: helper functions   Wolfgang Denk
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Wolfgang Denk
• [U-Boot] [PATCH v2] mx28evk, m28evk: sync extra environment content   Wolfgang Denk
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v4 3/3] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH 1/8] MX28: Fix a typo in mx28_reg_8 macro   Marek Vasut
• [U-Boot] [PATCH v2] mx28evk, m28evk: sync extra environment content   Wolfgang Denk
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Wolfgang Denk
• [U-Boot] [PATCH 1/8] MX28: Fix a typo in mx28_reg_8 macro   Otavio Salvador
• [U-Boot] [PATCH v2] mx28evk, m28evk: sync extra environment content   Otavio Salvador
• [U-Boot] [PATCH v4 0/3] net: helper functions   Wolfgang Denk
• [U-Boot] [PATCH v4 3/3] net: add eth_setenv_enetaddr_by_index()   Wolfgang Denk
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Wolfgang Denk
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Wolfgang Denk
• [U-Boot] [PATCH v4 0/3] net: helper functions   Wolfgang Denk
• [U-Boot] [PATCH v4 1/3] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH v4 0/3] net: helper functions   Wolfgang Denk
• [U-Boot] [PATCH v4 3/3] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v7 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] UBI: volume auto-resize   Matevz Langus
• [U-Boot] [PATCH v5 0/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v5 1/5] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v5 2/5] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH v5 3/5] net: fix potential compiler warning   Michael Walle
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v8 03/23] Add abs() macro to return absolute value   Simon Glass
• [U-Boot] [PATCH] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   Simon Glass
• [U-Boot] [PATCH] mx53: Fix mask for SATA reference clock   Fabio Estevam
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Marek Vasut
• [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt   Marek Vasut
• [U-Boot] [PATCH 1/3] MSM7630 Interrupt support   Marek Vasut
• [U-Boot] [PATCH] uboot and ZFS   Marek Vasut
• [U-Boot] Adding dataflash support for at91sam9m10g45ek   Thad Phetteplace
• [U-Boot] Question about md output   ffileppo at libero.it
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] Question about md output   Wolfgang Denk
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Marek Vasut
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH 1/1] fat: FAT sector offsets overflow on large disks and/or FAT partitions   Anatolij Gustschin
• [U-Boot] Commit acc4959fc breaks mx28evk   Fabio Estevam
• [U-Boot] Commit acc4959fc breaks mx28evk   Fabio Estevam
• [U-Boot] Commit acc4959fc breaks mx28evk   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] R: Re: Question about md output   ffileppo at libero.it
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Fix PSWITCH key position   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Fix PSWITCH key position   Marek Vasut
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Marek Vasut
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Wolfgang Denk
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Wolfgang Denk
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Wolfgang Denk
• [U-Boot] [PATCH] mx28evk: Scan only first 512 MB of DRAM to avoid memory wraparound   Wolfgang Denk
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Wolfgang Denk
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH 0/8] Minor fixes and start of consolidation onto mxs SoC   Otavio Salvador
• [U-Boot] [PATCH 1/8] m28evk: use same notation to alloc the 128kB stack   Otavio Salvador
• [U-Boot] [PATCH 2/8] m28evk: use "M28EVK U-Boot =>" as prompt   Otavio Salvador
• [U-Boot] [PATCH 3/8] mx28evk: ensure command definition is in alphabetic order   Otavio Salvador
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name   Otavio Salvador
• [U-Boot] [PATCH 6/8] mx28evk: fix board config include guardian macro name   Otavio Salvador
• [U-Boot] [PATCH 7/8] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Alexander Holler
• [U-Boot] [PATCH] Ignore all Carriage Returns when importing an environment.   Wolfgang Denk
• [U-Boot] mx28evk related problems   Alexander Hartmann
• [U-Boot] [PATCH 1/2] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/2 v2] Add option -r to env import to allow import of text files with CRLF as line endings   Alexander Holler
• [U-Boot] UBI: volume auto-resize   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Marek Vasut
• [U-Boot] [PATCH 2/8] m28evk: use "M28EVK U-Boot =>" as prompt   Marek Vasut
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Marek Vasut
• [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name   Marek Vasut
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
• [U-Boot] UBI: volume auto-resize   Matevz Langus
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
• [U-Boot] [PATCH 1/2] Add option -r to env import to allow import of text files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
• [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name   Wolfgang Denk
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Wolfgang Denk
• [U-Boot] UBI: volume auto-resize   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Marek Vasut
• [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 3/8] mx28evk: ensure command definition is in alphabetic order   Fabio Estevam
• [U-Boot] [PATCH 6/8] mx28evk: fix board config include guardian macro name   Fabio Estevam
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Wolfgang Denk
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Måns Rullgård
• [U-Boot] [PATCH] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH] uboot and ZFS   Graeme Russ
• [U-Boot] [PATCH] uboot and ZFS   Jorgen Lundman
• [U-Boot] [PATCH] Add gc-section support for ARM   Mike Frysinger
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Mike Frysinger
• [U-Boot] [PATCH] openrisc: Work around potential relocation issues   Mike Frysinger
• [U-Boot] [PATCH] tegra: override compiler flags for cmd_nvedit   Mike Frysinger
• [U-Boot] Adding dataflash support for at91sam9m10g45ek   Bo Shen
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Mike Frysinger
• [U-Boot] [PATCH v4] Kirkwood: add lschlv2 and lsxhl board support   Mike Frysinger
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Kyungmin Park
• [U-Boot] [PATCH v8 03/23] Add abs() macro to return absolute value   Mike Frysinger
• [U-Boot] [PATCH v4 0/3] net: helper functions   Mike Frysinger
• [U-Boot] [PATCH v4 2/3] net: add helper to generate random mac address   Mike Frysinger
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Mike Frysinger
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Mike Frysinger
• [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Mike Frysinger
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Kyungmin Park
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
• [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt   Srikanth Reddy
• [U-Boot] [PATCH V2 0/4] mtd/NAND: Support for FSMC controller   Stefan Roese
• [U-Boot] [PATCH] Add support for DS1388.   Kenth Eriksson
• [U-Boot] [PATCH] ATMEL/PIO: Enable new feature of PIO on Atmel device   Andreas Bießmann
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Rajeshwari Shinde
• [U-Boot] [PATCH 2/6 V4] EXYNOS5: Add structure for PMU registers   Rajeshwari Shinde
• [U-Boot] [PATCH 3/6 V4] USB: EXYNOS: Set USB 2.0 HOST Link mode   Rajeshwari Shinde
• [U-Boot] [PATCH 4/6 V4] EXYNOS: Add power Enable/Disable for USB-EHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 5/6 V4] EXYNOS5: USB: Fix incorrect USB base addresses   Rajeshwari Shinde
• [U-Boot] [PATCH 6/6 V4] CONFIG: EXYNOS5: USB: Enable USB 2.0 on smdk5250   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Tom Rini
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Mike Frysinger
• [U-Boot] [PATCH] arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx   Tom Rini
• [U-Boot] [PATCH] arm,davinci: update for enbw_cmc board   Tom Rini
• [U-Boot] [PATCH 1/3] omap4: panda: disable uart2 pads during boot   Tom Rini
• [U-Boot] [PATCH] OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree   Tom Rini
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
• [U-Boot] [PATCH] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   Tom Warren
• [U-Boot] Framebuffer support hangs kernel on mx53loco   Fabio Estevam
• [U-Boot] [PATCH] arm,davinci: update for enbw_cmc board   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master into ARM master   Tom Warren
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Marek Vasut
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
• [U-Boot] [PATCH] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   Simon Glass
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Luka Perkov
• [U-Boot] [PATCH] tegra: override compiler flags for cmd_nvedit   Allen Martin
• [U-Boot] U-Boot Developer's Meeting: July 11-12   Wolfgang Denk
• [U-Boot] Framebuffer support hangs kernel on mx53loco   Troy Kisky
• [U-Boot] Framebuffer support hangs kernel on mx53loco   Fabio Estevam
• [U-Boot] [PATCH v2] tegra: override compiler flags for cmd_nvedit   Allen Martin
• [U-Boot] [PATCH] omap4/5: Use CPUDIR for .lds script   Thomas Weber
• [U-Boot] [PATCH] Add gc-section support for ARM   Charles Manning
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 2/2] beagle: handle import of environments in files with CRLF as line endings   Alexander Holler
• [U-Boot] [PATCH] am33xx: Do not call init_timer twice   Tom Rini
• [U-Boot] [PATCH 1/1] fat: FAT sector offsets overflow on large disks and/or FAT partitions   Aaron Williams
• [U-Boot] [PATCH 1/2] tegra: add alternate UART1 funcmux entry   Stephen Warren
• [U-Boot] [PATCH 2/2] tegra: Whistler board support   Stephen Warren
• [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Allen Martin
• [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Stephen Warren
• [U-Boot] [PATCH] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH 8/8] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
• [U-Boot] [PATCH 4/9] tegra: Add SPL build support to tegra boards   Stephen Warren
• [U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t   Stephen Warren
• [U-Boot] [PATCH 6/9] tegra: enable SPL build for seaboard   Stephen Warren
• [U-Boot] [PATCH 7/9] tegra: add u-boot.t2 target   Stephen Warren
• [U-Boot] [PATCH 9/9] tegra2: Remove USE_PRIVATE_LIBGCC and armv4t build flags   Stephen Warren
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Mike Frysinger
• [U-Boot] [PATCH] Add gc-section support for ARM   Mike Frysinger
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Mike Frysinger
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Mike Frysinger
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Marek Vasut
• [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board   Heiko Schocher
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] Add gc-section support for ARM   Albert ARIBAUD
• [U-Boot] [PATCH] arm,davinci: update for enbw_cmc board   Heiko Schocher
• [U-Boot] UBI: volume auto-resize   Matevz Langus
• [U-Boot] ATA/CF support on u-boot   Altunbas Sabri (DC-IA/EAH2)
• [U-Boot] ATA/CF support on u-boot   Bo Shen
• [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs   Dirk Behme
• [U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly   Dirk Behme
• [U-Boot] [PATCH] Add doc/README.kbd   Dirk Behme
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Dirk Behme
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Anatolij Gustschin
• [U-Boot] [PATCH v4 00/27] updates for Keymile ARM boards   Valentin Longchamp
• [U-Boot] [PATCH v4 01/27] arm/km: add board type to boards.cfg   Valentin Longchamp
• [U-Boot] [PATCH v4 02/27] arm/km: add piggy mac adress offset for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v4 03/27] arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE   Valentin Longchamp
• [U-Boot] [PATCH v4 04/27] arm/km: use ARRAY_SIZE macro   Valentin Longchamp
• [U-Boot] [PATCH v4 05/27] arm/km: fix wrong comment in SDRAM config for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v4 06/27] arm/km: change maintainer for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v4 07/27] arm/km: remove CONFIG_RESET_PHY_R   Valentin Longchamp
• [U-Boot] [PATCH v4 08/27] arm/km: enable mii cmd   Valentin Longchamp
• [U-Boot] [PATCH v4 09/27] arm/km: use correct kw_gpio function for NAND/SPI switching   Valentin Longchamp
• [U-Boot] [PATCH v4 10/27] arm/kirkwood: protect the ENV_SPI #defines   Valentin Longchamp
• [U-Boot] [PATCH v4 11/27] arm/km: add kmnusa board support   Valentin Longchamp
• [U-Boot] [PATCH v4 12/27] arm/km: add kmcoge5un board support   Valentin Longchamp
• [U-Boot] [PATCH v4 13/27] arm/km: convert mgcoge3un target to km_kirkwood   Valentin Longchamp
• [U-Boot] [PATCH v4 14/27] arm/km: remove portl2.h and use km_kirkwood instead   Valentin Longchamp
• [U-Boot] [PATCH v4 15/27] arm/km: correct init of 88e6352 switch in the reset_phy function   Valentin Longchamp
• [U-Boot] [PATCH v4 16/27] arm/km: enable BOCO2 FPGA download support   Valentin Longchamp
• [U-Boot] [PATCH v4 17/27] arm/km: cleanup km_kirkwood boards   Valentin Longchamp
• [U-Boot] [PATCH v4 18/27] km_arm: redefine piggy 4 reg names to avoid conflicts   Valentin Longchamp
• [U-Boot] [PATCH v4 19/27] arm/km: add support for external switch configuration   Valentin Longchamp
• [U-Boot] [PATCH v4 20/27] arm/km: enable external switch configuration for kmnusa   Valentin Longchamp
• [U-Boot] [PATCH v4 21/27] arm/km: skip FPGA config when already configured   Valentin Longchamp
• [U-Boot] [PATCH v4 22/27] arm/km: support the 2 PCIe fpga resets   Valentin Longchamp
• [U-Boot] [PATCH v4 23/27] arm/km: add implementation for read_dip_switch   Valentin Longchamp
• [U-Boot] [PATCH v4 24/27] arm/km: fix testpin detection for kmcoge5un   Valentin Longchamp
• [U-Boot] [PATCH v4 25/27] arm/km: implement weak function board_spi_clam_bus/release   Valentin Longchamp
• [U-Boot] [PATCH v4 26/27] km/arm: remove spi toggle command   Valentin Longchamp
• [U-Boot] [PATCH v4 27/27] km_arm: use filesize for erase in update command   Valentin Longchamp
• [U-Boot] [PATCH 1/2] tegra: add alternate UART1 funcmux entry   Lucas Stach
• [U-Boot] UBI: volume auto-resize   Marek Vasut
• [U-Boot] [PATCH V2] tegra: Whistler board support   Stephen Warren
• [U-Boot] UBI: volume auto-resize   Scott Wood
• [U-Boot] UBI: volume auto-resize   Matevz Langus
• [U-Boot] [PATCH v2 1/3] mx53: Allow IPUv3 driver to also work on mx53   Fabio Estevam
• [U-Boot] [PATCH v3 00/10] Network stack checkpatch.pl compliance   Joe Hershberger
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Joe Hershberger
• [U-Boot] [PATCH v3 02/10] net: cosmetic: net.h checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 03/10] net: cosmetic: bootp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 04/10] net: cosmetic: eth.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 05/10] net: cosmetic: net.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 06/10] net: cosmetic: nfs.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 07/10] net: cosmetic: rarp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 08/10] net: cosmetic: sntp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 09/10] net: cosmetic: tftp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v3 10/10] net: cosmetic: netconsole.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Albert ARIBAUD
• [U-Boot] nand_get_device() and nand_release_device()   Scott Wood
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Thomas Weber
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Luka Perkov
• [U-Boot] [PATCH 1/3] m28evk: use same notation to alloc the 128kB stack   Otavio Salvador
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Fabio Estevam
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Scott Wood
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Marek Vasut
• [U-Boot] [PATCH 1/3] m28evk: use same notation to alloc the 128kB stack   Marek Vasut
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Marek Vasut
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Marek Vasut
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH 1/3] m28evk: use same notation to alloc the 128kB stack   Otavio Salvador
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Otavio Salvador
• [U-Boot] [PATCH] tegra: paz00: fix typo in SD slot CD detect GPIO   Stephen Warren
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Marek Vasut
• [U-Boot] [PATCH] Add gc-section support for ARM   Charles Manning
• [U-Boot] [PATCH 1/4] tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS   Stephen Warren
• [U-Boot] [PATCH 2/4] tegra: flesh out bootcmd   Stephen Warren
• [U-Boot] [PATCH 3/4] tegra: whistler: reduce and comment network cfg options   Stephen Warren
• [U-Boot] [PATCH 4/4] tegra: seaboard: add support for USB networking   Stephen Warren
• [U-Boot] [PATCH] Add gc-section support for ARM   Wolfgang Denk
• [U-Boot] [PATCH] sh: Add SH7269 device and RSK2+SH7269 board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH V2 1/2] spi: Tegra2: Seaboard: fix UART corruption during SPI transactions   Tom Warren
• [U-Boot] [PATCH V2 2/2] spi: Tegra2: Seaboard: enable SPI/UART corruption fix   Tom Warren
• [U-Boot] [PATCH] Add gc-section support for ARM   Charles Manning
• [U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC   Scott Wood
• [U-Boot] Pull request: u-boot-net/master   Joe Hershberger
• [U-Boot] [PATCH] Add doc/README.kbd   Eric Nelson
• [U-Boot] [PATCH 1/2 v2] net: punt bd->bi_ip_addr   Joe Hershberger
• [U-Boot] [PATCH 2/2 v2] net: move bootfile init into eth_initialize   Joe Hershberger
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Eric Nelson
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Otavio Salvador
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Marek Vasut
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Marek Vasut
• [U-Boot] [PATCH V2] tegra: Whistler board support   Tom Warren
• [U-Boot] [PATCH 1/4] tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS   Tom Warren
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Otavio Salvador
• [U-Boot] how to use u-boot to relocate an executeable to a static address in RAM?   apple pie
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Joe Hershberger
• [U-Boot] [PATCH v2] sh: Add support for AP-SH4A-4A board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Marek Vasut
• [U-Boot] [PATCH v5 3/5] net: fix potential compiler warning   Joe Hershberger
• [U-Boot] [PATCH] sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] net: sh-eth: Add support Gigabit of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH] Add doc/README.kbd   Dirk Behme
• [U-Boot] how to use u-boot to relocate an executeable to a static address in RAM?   apple pie
• [U-Boot] [PATCH v2] sh: Add SH7269 device and RSK2+SH7269 board   Phil Edworthy
• [U-Boot] UBI error after executing nandtest   Ana Rodríguez López
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH v2] ATMEL/PIO: Enable new feature of PIO on Atmel device   Andreas Bießmann
• [U-Boot] [PATCH 0/3] kirkwood spi_claim/release_bus support   Valentin Longchamp
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Valentin Longchamp
• [U-Boot] [PATCH 2/3] spi/kirkwood: support spi_claim/release_bus functions   Valentin Longchamp
• [U-Boot] [PATCH 3/3] spi/kirkwood: add weak functions board_spi_claim/release_bus   Valentin Longchamp
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V3 0/4] mtd/NAND: Support for FSMC controlle   Amit Virdi
• [U-Boot] [PATCH V3 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH V3 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V3 3/4] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V3 4/4] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Vivek Gautam
• [U-Boot] [PATCH V3 0/4] mtd/NAND: Support for FSMC controlle   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 0/4] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 3/4] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 4/4] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link   Simon Guinot
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH 0/6] Bug fixes and board support for LaCie devices   Simon Guinot
• [U-Boot] [PATCH 1/6] lacie_kw: fix SDRAM banks number for net2big_v2   Simon Guinot
• [U-Boot] [PATCH 2/6] lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2   Simon Guinot
• [U-Boot] [PATCH 3/6] lacie_kw: add support for EFI partitions   Simon Guinot
• [U-Boot] [PATCH 4/6] ARM: don't probe PHY address for LaCie boards   Simon Guinot
• [U-Boot] [PATCH 5/6] ARM: add support for Network Space v2 Lite and Mini   Simon Guinot
• [U-Boot] [PATCH 6/6] ARM: add support for d2 Network v2   Simon Guinot
• [U-Boot] Configure u-boot with netconsole   Rudy Cazeao
• [U-Boot] [PATCH v2 01/21] net: Remove CMD_PING where there's no CMD_NET   Joe Hershberger
• [U-Boot] [PATCH] tegra: add UART1 on GPU funcmux entry   Stephen Warren
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Scott Wood
• [U-Boot] [PATCH V2 1/4] tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS   Stephen Warren
• [U-Boot] [PATCH V2 2/4] tegra: flesh out bootcmd   Stephen Warren
• [U-Boot] [PATCH V2 3/4] tegra: whistler: reduce and comment network cfg options   Stephen Warren
• [U-Boot] [PATCH V2 4/4] tegra: seaboard: add support for USB networking   Stephen Warren
• [U-Boot] [PATCH] tegra: add SDIO1 funcmux entry for UARTA   Lucas Stach
• [U-Boot] [PATCH V2 4/4] tegra: seaboard: add support for USB networking   Lucas Stach
• [U-Boot] [PATCH V3 1/2] tegra: whistler: reduce and comment network cfg options   Stephen Warren
• [U-Boot] [PATCH V3 2/2] tegra: seaboard: add support for USB networking   Stephen Warren
• [U-Boot] [PATCH] tegra: add SDIO1 funcmux entry for UARTA   Stephen Warren
• [U-Boot] [PATCH V3 RESEND 2/4] mtd/NAND: Add FSMC driver support   Scott Wood
• [U-Boot] [PATCH 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH 2/2] tegra: enabled CONFIG_ENV_VAR_BOARD_NAME/VENDOR/SOC   Stephen Warren
• [U-Boot] Unifying device tree filenames, and U-Boot SoC name   Stephen Warren
• [U-Boot] [PATCH 1/2] Add env vars describing U-Boot target board   Otavio Salvador
• [U-Boot] [PATCH] tegra: add SDIO1 funcmux entry for UARTA   Lucas Stach
• [U-Boot] [PATCH 1/2] tegra: sync SDIO1 pingroup enum name with TRM   Lucas Stach
• [U-Boot] [PATCH 2/2] tegra: add SDIO1 funcmux entry for UARTA   Lucas Stach
• [U-Boot] [PATCH 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Jeroen Hofstee
• [U-Boot] [PATCH 1/2] omap3_dss: add optional framebuffer   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] omap3_dss: cosmetic changes   Jeroen Hofstee
• [U-Boot] [PATCH 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Jeroen Hofstee
• [U-Boot] [PATCH v2 03/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH] EXT2: Indent cleanup   Marek Vasut
• [U-Boot] [PATCH V2 2/4] tegra: flesh out bootcmd   Tom Warren
• [U-Boot] [PATCH V2 2/4] tegra: flesh out bootcmd   Stephen Warren
• [U-Boot] [PATCH 1/2] tegra: add SDMMC1 on SDIO1 funcmux entry   Stephen Warren
• [U-Boot] [PATCH 2/2] tegra: Compulab TrimSlice board support   Stephen Warren
• [U-Boot] What is the correct way to configure SPL options?   Charles Manning
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Donghwa Lee
• [U-Boot] [PATCH v2] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] Which version of u-boot contains support for twrmpc5125   Rudy Cazeao
• [U-Boot] [PATCH v4 06/27] arm/km: change maintainer for mgcoge3un   Heiko Schocher
• [U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2   Peter Ujfalusi
• [U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2   R, Sricharan
• [U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2   Peter Ujfalusi
• [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   R Sricharan
• [U-Boot] [PATCH 0/4] ARM: OMAP4+: Miscellaneous fixes   R Sricharan
• [U-Boot] [PATCH 1/4] ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections.   R Sricharan
• [U-Boot] [PATCH 2/4] ARM: OMAP5: dmm: Create a tiler trap section.   R Sricharan
• [U-Boot] [PATCH 3/4] ARM: OMAP5: Align memory used for testing to the power of 2   R Sricharan
• [U-Boot] [PATCH 4/4] ARM: OMAP5: Correct the DRAM_ADDR_SPACE_END macro.   R Sricharan
• [U-Boot] [PATCH V2 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V3 RESEND 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Stephen Warren
• [U-Boot] [RFC] Make i2c probe opt-outable?   Tom Rini
• [U-Boot] What is the correct way to configure SPL options?   Tom Rini
• [U-Boot] [PATCH] Add gc-section support for ARM   Tom Rini
• [U-Boot] What is the correct way to configure SPL options?   Scott Wood
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] What is the correct way to configure SPL options?   Tom Rini
• [U-Boot] What is the correct way to configure SPL options?   Scott Wood
• [U-Boot] Pericom PCIE bridge device not detected on APM8081x(ppc4xx)   Axl Rose
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] What is the correct way to configure SPL options?   Charles Manning
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Wolfgang Denk
• [U-Boot] Regarding BDI2000 connection problem with MPC8280 based board   Wolfgang Denk
• [U-Boot] Pericom PCIE bridge device not detected on APM8081x(ppc4xx)   Wolfgang Denk
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] how to make mkimage command work?   apple pie
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Tabi Timur-B04825
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Mike Frysinger
• [U-Boot] [RFC] Make i2c probe opt-outable?   Mike Frysinger
• [U-Boot] [PATCH] video/lcd: add new driver of LCD controler for Atmel new SoC   Bo Shen
• [U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()   Mike Frysinger
• [U-Boot] [PATCH] video/lcd: add new driver of LCD controler for Atmel new SoC   Mike Frysinger
• [U-Boot] [PATCH] video/lcd: add new driver of LCD controler for Atmel new SoC   Bo Shen
• [U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2   R, Sricharan
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Rajeshwari Birje
• [U-Boot] [PATCH V4 0/4] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH V4 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH V4 2/4] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V4 3/4] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V4 4/4] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2   Ujfalusi, Peter
• [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Rajeshwari Birje
• [U-Boot] Problem with USB recognition   Lukasz Nowak
• [U-Boot] Fwd: [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Chander Kashyap
• [U-Boot] [PATCH] SD/MMC: check the card status during erase operation   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH 2/2] SDHC/MMC: remove the member has_init   Huang Changming-R66093
• [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Chang-Ming.Huang at freescale.com
• [U-Boot] how to make mkimage command work?   Andreas Bießmann
• [U-Boot] [PATCH v2 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Jeroen Hofstee
• [U-Boot] [PATCH v2 1/2] omap3_dss: add optional framebuffer   Jeroen Hofstee
• [U-Boot] [PATCH v2 2/2] omap3_dss: cosmetic changes   Jeroen Hofstee
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH v2] ATMEL/PIO: Enable new feature of PIO on Atmel device   Andreas Bießmann
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Wolfgang Denk
• [U-Boot] how to make mkimage command work?   Wolfgang Denk
• [U-Boot] [PATCH] Remove extra boards from LIST_ixp   Wolfgang Denk
• [U-Boot] [PATCH v3] Allow for parallel builds and saved output   Wolfgang Denk
• [U-Boot] [PATCH] Improve MAKEALL parallel builds   Wolfgang Denk
• [U-Boot] [PATCH 0/8] EXYNOS5: Enable I2C support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/8] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
• [U-Boot] [PATCH 2/8] EXYNOS: Add I2C base address.   Rajeshwari Shinde
• [U-Boot] [PATCH 3/8] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
• [U-Boot] [PATCH 4/8] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
• [U-Boot] [PATCH 5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address   Rajeshwari Shinde
• [U-Boot] [PATCH 6/8] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
• [U-Boot] [PATCH 7/8] I2C: Add support for Multi channel   Rajeshwari Shinde
• [U-Boot] [PATCH 8/8] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
• [U-Boot] [PATCH V4 1/4] ARM: Define change_bit routine   Scott Wood
• [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Jeroen Hofstee
• [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Marek Vasut
• [U-Boot] [PATCH 1/2] powerpc/p1022ds: add support for SPI and SD boot   Timur Tabi
• [U-Boot] [PATCH 2/2] powerpc/p1022ds: Add support for NAND and NAND boot   Timur Tabi
• [U-Boot] What is the correct way to configure SPL options?   Tom Rini
• [U-Boot] [RFC] Make i2c probe opt-outable?   Tom Rini
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [RFC] Make i2c probe opt-outable?   Mike Frysinger
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 1/2] powerpc/p1022ds: add support for SPI and SD boot   Scott Wood
• [U-Boot] [PATCH 2/2] powerpc/p1022ds: Add support for NAND and NAND boot   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Timur Tabi
• [U-Boot] [PATCH 2/2] powerpc/p1022ds: Add support for NAND and NAND boot   Timur Tabi
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Scott Wood
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   McClintock Matthew-B29882
• [U-Boot] [PATCH 2/2] powerpc/p1022ds: Add support for NAND and NAND boot   McClintock Matthew-B29882
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Wolfgang Denk
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Wolfgang Denk
• [U-Boot] [RFC] Make i2c probe opt-outable?   Wolfgang Denk
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Wolfgang Denk
• [U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment   Fabio Estevam
• [U-Boot] [RFC] Make i2c probe opt-outable?   Tom Rini
• [U-Boot] [PATCH] powerpc/p1022ds: fix DIU/LBC switching with NAND enabled   Timur Tabi
• [U-Boot] tfpboot loadaddr problem   Aaron Williams
• [U-Boot] [PATCH 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Anatolij Gustschin
• [U-Boot] [PATCH 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Jeroen Hofstee
• [U-Boot] [RFC] Make i2c probe opt-outable?   Wolfgang Denk
• [U-Boot] [PATCH 9/9] tegra2: Remove USE_PRIVATE_LIBGCC and armv4t build flags   Allen Martin
• [U-Boot] [PATCH 7/9] tegra: add u-boot.t2 target   Allen Martin
• [U-Boot] [PATCH 6/9] tegra: enable SPL build for seaboard   Allen Martin
• [U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t   Allen Martin
• [U-Boot] [PATCH 4/9] tegra: Add SPL build support to tegra boards   Allen Martin
• [U-Boot] [PATCH v3] Correct corrupted NAND Flash access on KARO TX25 modules   Scott Wood
• [U-Boot] [PATCH 1/2] nand: extend .raw accesses to work on multiple pages   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: fix NAND boot linker scripts for -fpic   Scott Wood
• [U-Boot] nand_util: correct YAFFS image write function   Scott Wood
• [U-Boot] mtd, nand: move some printfs to debug output.   Scott Wood
• [U-Boot] driver/mtd: IFC NAND: Add support of ONFI NAND flash   Scott Wood
• [U-Boot] driver/mtd:IFC: Fix possible memory leak   Scott Wood
• [U-Boot] NAND: Remove ONFI detection message to from bootup log   Scott Wood
• [U-Boot] [PATCH 1/1] DaVinci: fix ddr2 vtp i/o calibration   Troy Kisky
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH] powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional   York Sun
• [U-Boot] Unable to use USB Keyboard on u-boot   Marek Vasut
• [U-Boot] [PATCH] common/cmd_bootm.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH] fat: fix FAT sector offsets overflow on large FAT partitions   Anatolij Gustschin
• [U-Boot] [PATCH] include/part.h: fix indentation of lba   Anatolij Gustschin
• [U-Boot] Unable to use USB Keyboard on u-boot   Jeroen Hofstee
• [U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back   Anatolij Gustschin
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master :: FOR u-boot/-next   Marek Vasut
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Stijn Souffriau
• [U-Boot] [PATCH] Added u-boot header generating functionality to ublimage   Stijn Souffriau
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Mike Frysinger
• [U-Boot] [PATCH] Added u-boot header generating functionality to ublimage   Mike Frysinger
• [U-Boot] silent console with nand   Wolfgang Denk
• [U-Boot] [PATCH] README: Fix how to for serial console when CONFIG_CFB_CONSOLE is defined   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-net/master   Wolfgang Denk
• [U-Boot] [PATCH v3 05/11] cfb_console: Add console_clear_line function   Anatolij Gustschin
• [U-Boot] [PATCH v3 05/11] cfb_console: Add console_clear_line function   Anatolij Gustschin
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master :: FOR u-boot/-next   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master :: FOR u-boot/-next   Marek Vasut
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH] common/cmd_nand.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/smc911x.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/usb/eth/smsc95xx.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/mpc5xxx_fec.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] arch/arm/cpu/ixp/npe/npe.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/usb/eth/asix.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [GIT PULL RESEND] ext2load speedup   Jason Cooper
• [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Huang Changming-R66093
• [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Huang Changming-R66093
• [U-Boot] [GIT PULL RESEND] ext2load speedup   Wolfgang Denk
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Rajeshwari Birje
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Marek Vasut
• [U-Boot] [PATCH v2] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Heiko Schocher
• [U-Boot] [PATCH 1/6 V4] EXYNOS5: Fix system register structure   Anatolij Gustschin
• [U-Boot] [PATCH] Added u-boot header generating functionality to ublimage   Heiko Schocher
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Wolfgang Denk
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Wolfgang Denk
• [U-Boot] [PATCH] MPC8xx: fix "Remove volatile from net API" aftermath   Wolfgang Denk
• [U-Boot] [PATCH] USB: EXYNOS: Incorporate EHCI review comments   Rajeshwari Shinde
• [U-Boot] Changing DRAM Size on Lite5200B   George Rubin
• [U-Boot] [PATCH] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Shinde
• [U-Boot] Unifying device tree filenames, and U-Boot SoC name   Thierry Reding
• [U-Boot] [PATCH] README: Fix how to for serial console when CONFIG_CFB_CONSOLE is defined   Fabio Estevam
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Joe Hershberger
• [U-Boot] [PATCH v3] patman: Handle creation of patman config   Vikram Narayanan
• [U-Boot] [PATCH 0/2] patman further fixes   Vikram Narayanan
• [U-Boot] [PATCH 1/2] MAKEALL: Fix error reporting for BUILD_NBUILDS==1   Joe Hershberger
• [U-Boot] [PATCH 2/2] MAKEALL: Report boards with errors vs warnings   Joe Hershberger
• [U-Boot] [PATCH] Fix unused variable compile warning   Joe Hershberger
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Scott Wood
• [U-Boot] [PATCH] davinci: Fix Ethernet driver interface warning   Joe Hershberger
• [U-Boot] silent console with nand   Scott Wood
• [U-Boot] [PATCH] drivers/net/mpc5xxx_fec.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH 0/5]: Correct i2c support on am33xx   Tom Rini
• [U-Boot] [PATCH 1/5] Revert "I2C: OMAP: detect more devices when probing an i2c bus"   Tom Rini
• [U-Boot] [PATCH 2/5] am335x: Correct i2c sysc offset   Tom Rini
• [U-Boot] [PATCH 3/5] am33xx: Fill in more cm_wkuppll / cm_perpll   Tom Rini
• [U-Boot] [PATCH 4/5] am33xx: Fix i2c sampling rate typo   Tom Rini
• [U-Boot] [PATCH 5/5] omap24xx_i2c: Add AM33XX support   Tom Rini
• [U-Boot] [RFC] Make i2c probe opt-outable?   Tom Rini
• [U-Boot] [PATCH] net: Fix smc911x Ethernet driver warning   Joe Hershberger
• [U-Boot] [PATCH] net: Fix smc911x Ethernet driver warning   Anatolij Gustschin
• [U-Boot] [PATCH] net: Fix smc911x Ethernet driver warning   Joe Hershberger
• [U-Boot] [PATCH] powerpc/mpc8xxx: fix workaround for errata DDR111 and DDR134 for DDR over 4GB   York Sun
• [U-Boot] [PATCH 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
• [U-Boot] [PATCH] README: Fix how to for serial console when CONFIG_CFB_CONSOLE is defined   Wolfgang Denk
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Wolfgang Denk
• [U-Boot] Changing DRAM Size on Lite5200B   Wolfgang Denk
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Joe Hershberger
• [U-Boot] silent console with nand   Wolfgang Denk
• [U-Boot] [PATCH v3 01/10] net: Remove volatile from net API   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/mpc512x_fec.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH] ppc: Fix warning in TSEC Ethernet driver   Joe Hershberger
• [U-Boot] [PATCH] tegra: harmony: add device tree support   Stephen Warren
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Stephen Warren
• [U-Boot] [PATCH] davinci: Fix Ethernet driver interface warning   Joe Hershberger
• [U-Boot] [PATCH] net: Fix smc911x Ethernet driver warning   Anatolij Gustschin
• [U-Boot] [PATCH] davinci: Fix Ethernet driver interface warning   Tom Rini
• [U-Boot] [PATCH] davinci: Fix Ethernet driver interface warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/smc911x.c: Fix GCC 4.6 warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/usb/eth/smsc95xx.c: Fix GCC 4.6 warning   Joe Hershberger
• [U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440)   Gabriel Huau
• [U-Boot] [PATCH] drivers/net/mpc5xxx_fec.c: Fix build warning   Joe Hershberger
• [U-Boot] [PATCH] arch/arm/cpu/ixp/npe/npe.c: Fix build warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/4xx_enet.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/usb/eth/asix.c: Fix build warning   Joe Hershberger
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Joe Hershberger
• [U-Boot] [PATCH] MPC8xx: fix "Remove volatile from net API" aftermath   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/mpc512x_fec.c: Fix build warning   Joe Hershberger
• [U-Boot] [PATCH v4 0/3] net: helper functions   Michael Walle
• [U-Boot] [PATCH] ppc: Fix warning in TSEC Ethernet driver   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/4xx_enet.c: Fix build warning   Joe Hershberger
• [U-Boot] [PATCH 1/4] OMAP3 Beagle: Set BOOTDELAY to 3   Tom Rini
• [U-Boot] [PATCH 2/4] omap3evm: Set BOOTDELAY to 3   Tom Rini
• [U-Boot] [PATCH 3/4] omap3_beagle: Add CONFIG_CMD_ASKENV   Tom Rini
• [U-Boot] [PATCH 4/4] omap3evm: Add CONFIG_CMD_ASKENV   Tom Rini
• [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link   Daniel Stodden
• [U-Boot] [PATCH 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
• [U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440)   Wolfgang Denk
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Wolfgang Denk
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Joe Hershberger
• [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link   Wolfgang Denk
• [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link   Wolfgang Denk
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Wolfgang Denk
• [U-Boot] [PATCH] Fix cmd_nvedit.c: warning: unused variable 'bd'   Joe Hershberger
• [U-Boot] NAND: Remove ONFI detection message to from bootup log   stefan at roese.nl
• [U-Boot] FYI: Warning on tegra builds   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/4xx_enet.c: Fix build warning   stefan at roese.nl
• [U-Boot] Warning on tegra builds   Tom Warren
• [U-Boot] Warning on tegra builds   Joe Hershberger
• [U-Boot] [PATCH V2 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH V2 2/2] tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG   Stephen Warren
• [U-Boot] [PATCH 1/2] tegra: add SDMMC1 on SDIO1 funcmux entry   Simon Glass
• [U-Boot] [PATCH] drivers/net/armada100_fec.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/at91_emac.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/calxedaxgmac.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/cs8900.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/dc2114x.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/dm9000x.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/dnet.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/eepro100.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/enc28j60.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/fec_mxc.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/ftmac100.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/ks8695eth.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/lan91c96.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/macb.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/smc91111.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH 1/2] tegra: add alternate UART1 funcmux entry   Simon Glass
• [U-Boot] Unifying device tree filenames, and U-Boot SoC name   Simon Glass
• [U-Boot] Unifying device tree filenames, and U-Boot SoC name   Allen Martin
• [U-Boot] [PATCH] USB: EXYNOS: Incorporate EHCI review comments   Marek Vasut
• [U-Boot] [PATCH v2] sh: Add SH7269 device and RSK2+SH7269 board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] tegra: add SDMMC1 on SDIO1 funcmux entry   Stephen Warren
• [U-Boot] [PATCH 1/2] tegra: add alternate UART1 funcmux entry   Stephen Warren
• [U-Boot] [PATCH] EXT4   Jorgen Lundman
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] EXT4   Graeme Russ
• [U-Boot] [PATCH] ZFS   Graeme Russ
• [U-Boot] [PATCH] EXT4   Jorgen Lundman
• [U-Boot] [PATCH] EXT4   Graeme Russ
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] ZFS   Graeme Russ
• [U-Boot] [PATCH] sh/ap_sh4a_4a: Fix typo of operator in ET0_ETXD4   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] USB: EXYNOS: Incorporate EHCI review comments   Rajeshwari Birje
• [U-Boot] [PATCH] USB: EXYNOS: Incorporate EHCI review comments   Marek Vasut
• [U-Boot] [PATCH] EXT4   Jorgen Lundman
• [U-Boot] [PATCH] EXT4   Stefan Kristiansson
• [U-Boot] [PATCH] EXT4   Graeme Russ
• [U-Boot] [PATCH] EXT4   Jorgen Lundman
• [U-Boot] [PATCH] EXT4   Graeme Russ
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] PMIC: MAX77686: Add support for MAX77686   Lukasz Majewski
• [U-Boot] [PATCH] ZFS   Graeme Russ
• [U-Boot] [PATCH 0/5]: Correct i2c support on am33xx   Heiko Schocher
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] ZFS   Graeme Russ
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Marc Dietrich
• [U-Boot] [PATCH] common/cmd_bootm.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH] fat: fix FAT sector offsets overflow on large FAT partitions   Wolfgang Denk
• [U-Boot] [PATCH] include/part.h: fix indentation of lba   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nand.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH 1/2] MAKEALL: Fix error reporting for BUILD_NBUILDS==1   Wolfgang Denk
• [U-Boot] [PATCH 2/2] MAKEALL: Report boards with errors vs warnings   Wolfgang Denk
• [U-Boot] [PATCH V2 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
• [U-Boot] [PATCH] ZFS   Wolfgang Denk
• [U-Boot] [PATCH] ZFS   Wolfgang Denk
• [U-Boot] [PATCH] EXT4   Wolfgang Denk
• [U-Boot] [PATCH] EXT4   Wolfgang Denk
• [U-Boot] [PATCH v2] video: atmel/lcd: add LCD driver for Atmel new SoC   Bo Shen
• [U-Boot] [PATCH 0/7] OMAP5: Add support for OMAP5432 SOC   Lokesh Vutla
• [U-Boot] [PATCH 1/7] OMAP5: Adding correct Control id code for OMAP5430   Lokesh Vutla
• [U-Boot] [PATCH 2/7] OMAP5: ADD chip detection for OMAP5432 SOC   Lokesh Vutla
• [U-Boot] [PATCH 3/7] OMAP5: Configure the io settings for omap5432 uevm board   Lokesh Vutla
• [U-Boot] [PATCH 4/7] OMAP5: ADD precalculated timings for ddr3   Lokesh Vutla
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Lokesh Vutla
• [U-Boot] [PATCH 6/7] OMAP5: DPLL core lock for OMAP5432   Lokesh Vutla
• [U-Boot] [PATCH 7/7] OMAP5: Change voltages for omap5432   Lokesh Vutla
• [U-Boot] [PATCH] arm: AT91: add at91sam9x5ek board support   Bo Shen
• [U-Boot] [PATCH V4 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH V5 0/3] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH V5 1/3] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V5 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V5 3/3] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH 1/7] OMAP5: Adding correct Control id code for OMAP5430   R, Sricharan
• [U-Boot] [PATCH 4/7] OMAP5: ADD precalculated timings for ddr3   R, Sricharan
• [U-Boot] [PATCH 6/7] OMAP5: DPLL core lock for OMAP5432   R, Sricharan
• [U-Boot] [PATCH 1/5] Revert "I2C: OMAP: detect more devices when probing an i2c bus"   Heiko Schocher
• [U-Boot] [PATCH 2/5] am335x: Correct i2c sysc offset   Heiko Schocher
• [U-Boot] [PATCH 3/5] am33xx: Fill in more cm_wkuppll / cm_perpll   Heiko Schocher
• [U-Boot] [PATCH 4/5] am33xx: Fix i2c sampling rate typo   Heiko Schocher
• [U-Boot] [PATCH 5/5] omap24xx_i2c: Add AM33XX support   Heiko Schocher
• [U-Boot] Nand flash R/W,saveenv issue..   Marek Vasut
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Tom Rini
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   R, Sricharan
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Tom Rini
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   R, Sricharan
• [U-Boot] Combine zImage and rootfs in single uImage   Grant Edwards
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Tom Rini
• [U-Boot] [PATCH V4 1/4] ARM: Define change_bit routine   Wolfgang Denk
• [U-Boot] [PATCH v3] patman: Handle creation of patman config   Wolfgang Denk
• [U-Boot] [PATCH 1/2] patman: Change the location of the config file   Wolfgang Denk
• [U-Boot] [PATCH 2/2] patman: Update README   Wolfgang Denk
• [U-Boot] Combine zImage and rootfs in single uImage   Wolfgang Denk
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Stephen Warren
• [U-Boot] [PATCH V2 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH 1/2] patman: Change the location of the config file   Simon Glass
• [U-Boot] [PATCH 2/2] patman: Update README   Simon Glass
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Stephen Warren
• [U-Boot] [PATCH v3] patman: Handle creation of patman config   Simon Glass
• [U-Boot] [PATCH 6/9] tegra: enable SPL build for seaboard   Stephen Warren
• [U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t   Stephen Warren
• [U-Boot] Combine zImage and rootfs in single uImage   Grant Edwards
• [U-Boot] [PATCH] spi: tegra2: rename tegra2_spi.* to tegra_spi.*   Tom Warren
• [U-Boot] [PATCH] arch/powerpc/cpu/mpc8220/fec.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] arch/powerpc/cpu/mpc8260/ether_fcc.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] arch/powerpc/cpu/mpc85xx/ether_fcc.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] board/esd/cpci405/cpci405.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/e1000.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/fm/eth.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/natsemi.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/ns8382x.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/rtl8139.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/tsi108_eth.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/uli526x.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/qe/uec.c: Fix compile warning   Joe Hershberger
• [U-Boot] Nand flash R/W,saveenv issue..   Scott Wood
• [U-Boot] [PATCH V2 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
• [U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440)   Gabriel Huau
• [U-Boot] Combine zImage and rootfs in single uImage   Wolfgang Denk
• [U-Boot] [PATCH 6/9] tegra: enable SPL build for seaboard   Allen Martin
• [U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t   Allen Martin
• [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH V3 2/2] tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG   Stephen Warren
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Simon Glass
• [U-Boot] [PATCH] net: Fix remaining API interface breakage   Joe Hershberger
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Scott Wood
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Simon Glass
• [U-Boot] [PATCH] net: Remove redefinitions of net.h functions   Joe Hershberger
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Scott Wood
• [U-Boot] [PATCH] integrator: break out common config   Linus Walleij
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Marc Dietrich
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Rob Herring
• [U-Boot] [PATCH] mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*   Tom Warren
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] Combine zImage and rootfs in single uImage   Grant Edwards
• [U-Boot] [PATCH] drivers/net/xilinx_ll_temac.c: Fix compile warning   Stephan Linz
• [U-Boot] [PATCH] drivers/net/xilinx_emaclite.c: Fix compile warning   Stephan Linz
• [U-Boot] [PATCH] drivers/net/xilinx_axi_emac.c: Fix compile warning   Stephan Linz
• [U-Boot] [PATCH] gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*   Tom Warren
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Stephen Warren
• [U-Boot] dfu in master?   David Lanzendörfer
• [U-Boot] adm5120 old patch   Benjamin Henrion
• [U-Boot] [PATCH v2 3/3] net: Work-around for brain-damaged Cisco equipment with arp-proxy   Joe Hershberger
• [U-Boot] Directories being left undeleted in spl/ after mrproper   Marek Vasut
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
• [U-Boot] [PATCH 2/3] MX28: Cleanup mxsboot within make mrproper   Marek Vasut
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Marek Vasut
• [U-Boot] [PATCH] net: Remove redefinitions of net.h functions   Mike Frysinger
• [U-Boot] [PATCH 0/2] zfs: Add filesystem ZFS support   Jorgen Lundman
• [U-Boot] [PATCH 1/2] ZFS header files   Jorgen Lundman
• [U-Boot] [PATCH 2/2] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH 2/2] zfs: Add ZFS filesystem support   Graeme Russ
• [U-Boot] [PATCH 2/2] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH v2 0/2] zfs: Add filesystem ZFS support   Jorgen Lundman
• [U-Boot] [PATCH v2 1/2] ZFS header files   Jorgen Lundman
• [U-Boot] [PATCH v2 2/2] zfs: Add ZFS support   Jorgen Lundman
• [U-Boot] [PATCH] ZFS   Jorgen Lundman
• [U-Boot] [PATCH] arch/powerpc/cpu/mpc8260/ether_scc.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/pcnet.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/rtl8169.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH 2/2] zfs: Add ZFS filesystem support   Graeme Russ
• [U-Boot] [PATCH v2 2/2] zfs: Add ZFS support   Graeme Russ
• [U-Boot] [PATCH v2] net: Fix remaining API interface breakage   Joe Hershberger
• [U-Boot] [PATCH] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Birje
• [U-Boot] Nand flash R/W,saveenv issue..   Manukumar
• [U-Boot] [PATCH 2/2] exynos: smdk5250: Enable the pinmux setup   Chander Kashyap
• [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Chander Kashyap
• [U-Boot] U boot modification...   santosh vastrad
• [U-Boot] U boot modification...   santosh vastrad
• [U-Boot] FDT: Question about embedded fdt enable   Donghwa Lee
• [U-Boot] [PATCH 2/2] zfs: Add ZFS filesystem support   Wolfgang Denk
• [U-Boot] [PATCH v2 0/2] zfs: Add filesystem ZFS support   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] ZFS header files   Wolfgang Denk
• [U-Boot] Nand flash R/W,saveenv issue..   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] ZFS header files   Jorgen Lundman
• [U-Boot] Nand flash R/W,saveenv issue..   Manukumar
• [U-Boot] [PATCH 2/2] exynos: smdk5250: Enable the pinmux setup   Rajeshwari Birje
• [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V2] EXYNOS: SMDK5250: Enable the pinmux setup   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V2] PMIC: SMDK5250: Enable MAX77686 pmic chip   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Rajeshwari Birje
• [U-Boot] [PATCH 2/2 V2] PMIC: SMDK5250: Enable MAX77686 pmic chip   Rajeshwari Birje
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
• [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Chander Kashyap
• [U-Boot] [PATCH 2/2 V2] EXYNOS: SMDK5250: Enable the pinmux setup   Chander Kashyap
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
• [U-Boot] Missing mtd device   Michael Moller
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Wolfgang Denk
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
• [U-Boot] Missing mtd device   Wolfgang Denk
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Marek Vasut
• [U-Boot] Missing mtd device   Gary Thomas
• [U-Boot] [PATCH] tegra: paz00: add device tree support   Marc Dietrich
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   R, Sricharan
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Fabio Estevam
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Fabio Estevam
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Marek Vasut
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Marek Vasut
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Fabio Estevam
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Fabio Estevam
• [U-Boot] [PATCH 3/3] M28: Disable USB power on boot   Marek Vasut
• [U-Boot] [U-Boot-Users] U-Boot WinCE booting support?   Luc Dechamp
• [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Thierry Reding
• [U-Boot] [U-Boot-Users] U-Boot WinCE booting support?   Andrea Scian
• [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Stephen Warren
• [U-Boot] Nand flash R/W,saveenv issue..   Scott Wood
• [U-Boot] [PATCH v5 1/5] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Tom Rini
• [U-Boot] [PATCH] tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it   Stephen Warren
• [U-Boot] [PATCH] tegra: ventana: add own device tree, enable USB   Stephen Warren
• [U-Boot] [PATCH v3 00/21] Network stack cosmetic improvements   Joe Hershberger
• [U-Boot] [PATCH v3 01/21] net: Remove CMD_PING where there's no CMD_NET   Joe Hershberger
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH v3 03/21] net: Move CDP out of net.c   Joe Hershberger
• [U-Boot] [PATCH v3 04/21] net: Encapsulate CDP packet identification   Joe Hershberger
• [U-Boot] [PATCH v3 05/21] net: Move ARP out of net.c   Joe Hershberger
• [U-Boot] [PATCH v3 06/21] net: Move PING out of net.c   Joe Hershberger
• [U-Boot] [PATCH v3 07/21] net: Move RARP receive logic out of net.c   Joe Hershberger
• [U-Boot] [PATCH v3 08/21] net: cosmetic: Un-typedef IP_t   Joe Hershberger
• [U-Boot] [PATCH v3 09/21] net: cosmetic: Split struct ip_udp_hdr into ip_hdr   Joe Hershberger
• [U-Boot] [PATCH v3 10/21] net: cosmetic: Un-typedef Ethernet_t   Joe Hershberger
• [U-Boot] [PATCH v3 11/21] net: cosmetic: Un-typedef VLAN_Ethernet_t   Joe Hershberger
• [U-Boot] [PATCH v3 12/21] net: cosmetic: Un-typedef ARP_t   Joe Hershberger
• [U-Boot] [PATCH v3 13/21] net: cosmetic: Un-typedef ICMP_t   Joe Hershberger
• [U-Boot] [PATCH v3 14/21] net: cosmetic: Rename parameter len to payload_len   Joe Hershberger
• [U-Boot] [PATCH v3 15/21] net: cosmetic: Add a more explicit comment about 802.2   Joe Hershberger
• [U-Boot] [PATCH v3 16/21] net: cosmetic: Rename "x" to "eth_proto"   Joe Hershberger
• [U-Boot] [PATCH v3 17/21] net: cosmetic: Rename CDPHandler to cdp_receive   Joe Hershberger
• [U-Boot] [PATCH v3 18/21] net: cosmetic: Rename OPT_SIZE to OPT_FIELD_SIZE   Joe Hershberger
• [U-Boot] [PATCH v3 19/21] net: cosmetic: Alphabetize includes in net.c   Joe Hershberger
• [U-Boot] [PATCH v3 20/21] net: cosmetic: Rename tmp to reply_ip_addr in arp.c   Joe Hershberger
• [U-Boot] [PATCH v3 21/21] net: cosmetic: Replace magic numbers in arp.c with constants   Joe Hershberger
• [U-Boot] [PATCH v3 00/18] Network stack refactoring   Joe Hershberger
• [U-Boot] [PATCH v3 01/18] net: Refactor IP, UPD, and ICMP header writing functions   Joe Hershberger
• [U-Boot] [PATCH v3 02/18] net: Refactor NetSendUDPPacket to share more code   Joe Hershberger
• [U-Boot] [PATCH v3 03/18] net: Refactor packet length computations   Joe Hershberger
• [U-Boot] [PATCH v3 04/18] net: Refactor bootp packet length computations   Joe Hershberger
• [U-Boot] [PATCH v3 05/18] net: Move debug trace to point of action   Joe Hershberger
• [U-Boot] [PATCH v3 06/18] net: Refactor ping receive handler   Joe Hershberger
• [U-Boot] [PATCH v3 07/18] net: Refactor to use NetSendPacket instead of eth_send directly   Joe Hershberger
• [U-Boot] [PATCH v3 08/18] net: Refactor to protect access to the NetState variable   Joe Hershberger
• [U-Boot] [PATCH v3 09/18] net: Refactor to separate the UDP handler from the ARP handler   Joe Hershberger
• [U-Boot] [PATCH v3 10/18] net: Add net_update_ether() to handle ARP and Ping replies   Joe Hershberger
• [U-Boot] [PATCH v3 11/18] net: Don't write the "serverip" env var if configured not to   Joe Hershberger
• [U-Boot] [PATCH v3 12/18] net: Fix unused variable compile warning   Joe Hershberger
• [U-Boot] [PATCH v3 13/18] net: Add option CONFIG_BOOTP_MAY_FAIL   Joe Hershberger
• [U-Boot] [PATCH v3 14/18] net: Remove static allocation for MAC address in PingSend()   Joe Hershberger
• [U-Boot] [PATCH v3 15/18] net: Remove unused parameter from NetInitLoop()   Joe Hershberger
• [U-Boot] [PATCH v3 16/18] net: Fix net buffer initialization   Joe Hershberger
• [U-Boot] [PATCH v3 17/18] net: Make sure NetLoop is initialized when using NetConsole   Joe Hershberger
• [U-Boot] [PATCH v3 18/18] net: Don't copy every packet that waits for an ARP   Joe Hershberger
• [U-Boot] [PATCH v3 0/3] Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH v3 1/3] net: Separate ArpRequest() into lower-level func   Joe Hershberger
• [U-Boot] [PATCH v3 2/3] net: Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH v3 3/3] net: Work-around for brain-damaged Cisco equipment with arp-proxy   Joe Hershberger
• [U-Boot] [PATCH v3] net: Allow filtering on debug traces in the net subsystem   Joe Hershberger
• [U-Boot] [PATCH 0/2] patman: Various fixes   Vikram Narayanan
• [U-Boot] [PATCH 1/2] patman: Change the location of patman config file   Vikram Narayanan
• [U-Boot] [PATCH 2/2] patman: Handle creation of patman config file   Vikram Narayanan
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/xilinx_emaclite.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/xilinx_axi_emac.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/xilinx_ll_temac.c: Fix compile warning   Joe Hershberger
• [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device   Joe Hershberger
• [U-Boot] [PATCH v2] net: sh-eth: Add support Gigabit of SH7734   Joe Hershberger
• [U-Boot] [PATCH 7/7] pxe: add support for parsing local syslinux files   Joe Hershberger
• [U-Boot] [PATCH v3 08/21] net: cosmetic: Un-typedef IP_t   Anatolij Gustschin
• [U-Boot] [PATCH v3 08/21] net: cosmetic: Un-typedef IP_t   Joe Hershberger
• [U-Boot] Nand flash R/W,saveenv issue..   Scott Wood
• [U-Boot] undefined reference to `net_set_upd_handler'   Stephan Linz
• [U-Boot] undefined reference to `net_set_upd_handler'   Joe Hershberger
• [U-Boot] undefined reference to `net_set_upd_handler'   Joe Hershberger
• [U-Boot] [PATCH 7/7] pxe: add support for parsing local syslinux files   Rob Herring
• [U-Boot] [PATCH 7/7] pxe: add support for parsing local syslinux files   Joe Hershberger
• [U-Boot] EFI/GPT support in U-Boot : real-world tests   David Purdy
• [U-Boot] undefined reference to `net_set_upd_handler'   Stephan Linz
• [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 0/1] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH v3 1/1] Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH 1/2] powerpc/p1022ds: add support for SPI and SD boot   McClintock Matthew-B29882
• [U-Boot] [PATCH V4 1/4] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] EFI/GPT support in U-Boot : real-world tests   Prafulla Wadaskar
• [U-Boot] [PATCH v5 1/5] lib: add rand() function   Prafulla Wadaskar
• [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Prabhakar Kushwaha
• [U-Boot] [PATCH V5 0/3] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Graeme Russ
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH V5 RESEND 1/3] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH V5 RESEND 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH V5 RESEND 3/3] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH] drivers/net/armada100_fec.c: Fix compile warning   Prafulla Wadaskar
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   R, Sricharan
• [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Thierry Reding
• [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link   Prafulla Wadaskar
• [U-Boot] [PATCH 3/4 V2] USB: Drop cache flush bloat in EHCI-HCD   Anatolij Gustschin
• [U-Boot] [PATCH] tegra: Implement oscillator frequency detection   Thierry Reding
• [U-Boot] [PATCH 1/3] tegra: usb: Add USB support to Tamonten boards   Thierry Reding
• [U-Boot] [PATCH 2/3] tegra: medcom: Add device tree support   Thierry Reding
• [U-Boot] [PATCH 3/3] tegra: plutux: Add device tree support   Thierry Reding
• [U-Boot] [PATCH v3 1/1] Add ZFS filesystem support   Prabhakar Lad
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
• [U-Boot] [PATCH 0/6] Bug fixes and board support for LaCie devices   Prafulla Wadaskar
• [U-Boot] [PATCH v3 1/1] Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH 5/6] ARM: add support for Network Space v2 Lite and Mini   Prafulla Wadaskar
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Prafulla Wadaskar
• [U-Boot] [PATCH 2/3] spi/kirkwood: support spi_claim/release_bus functions   Prafulla Wadaskar
• [U-Boot] [PATCH 3/3] spi/kirkwood: add weak functions board_spi_claim/release_bus   Prafulla Wadaskar
• [U-Boot] [PATCH v4 25/27] arm/km: implement weak function board_spi_clam_bus/release   Prafulla Wadaskar
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH] ARM: OMAP4: Correct the lpddr2 io settings register value.   R Sricharan
• [U-Boot] [PATCH v5 1/5] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH 0/7] common/lcd cleanup   Igor Grinberg
• [U-Boot] [PATCH 1/7] common lcd: minor coding style changes   Igor Grinberg
• [U-Boot] [PATCH 2/7] common lcd: simplify #ifdefs   Igor Grinberg
• [U-Boot] [PATCH 3/7] common lcd: simplify bitmap_plot   Igor Grinberg
• [U-Boot] [PATCH 4/7] common lcd: simplify lcd_logo   Igor Grinberg
• [U-Boot] [PATCH 5/7] common lcd: simplify lcd_display   Igor Grinberg
• [U-Boot] [PATCH 6/7] common lcd: simplify core functions   Igor Grinberg
• [U-Boot] [PATCH 7/7] common lcd: simplify lcd_display_bitmap   Igor Grinberg
• [U-Boot] malloc failing in U-Boot   Sandeep Kumar
• [U-Boot] [PATCH 3/4 V2] USB: Drop cache flush bloat in EHCI-HCD   Marek Vasut
• [U-Boot] [PATCH 5/7] OMAP5: EMIF: Add support for DDR3 device   Tom Rini
• [U-Boot] [PATCH 0/4] cm-t35 updates and non-critical fixes   Igor Grinberg
• [U-Boot] [PATCH 1/4] cm-t35: reduce the environment size   Igor Grinberg
• [U-Boot] [PATCH 2/4] cm-t35: fix incorrect BOARD_REV_SIZE value   Igor Grinberg
• [U-Boot] [PATCH 3/4] cm-t35: fix legacy board revision representation   Igor Grinberg
• [U-Boot] [PATCH 4/4] cm-t35: print PCB revision information   Igor Grinberg
• [U-Boot] Unable to use USB Keyboard on u-boot   Atul Kumar
• [U-Boot] [PATCH] tegra: Implement oscillator frequency detection   Stephen Warren
• [U-Boot] [PATCH 1/3] tegra: usb: Add USB support to Tamonten boards   Stephen Warren
• [U-Boot] [PATCH 2/3] tegra: medcom: Add device tree support   Stephen Warren
• [U-Boot] [PATCH 3/3] tegra: plutux: Add device tree support   Stephen Warren
• [U-Boot] [PATCH v4 25/27] arm/km: implement weak function board_spi_clam_bus/release   Holger Brunck
• [U-Boot] [PATCH V5 RESEND 1/3] mtd/NAND: Add FSMC driver support   Vikram Narayanan
• [U-Boot] [PATCH 4/4] cm-t35: print PCB revision information   Tom Rini
• [U-Boot] Unable to use USB Keyboard on u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2 0/2] omap_dss: add optional 32bit XXRRGGBB framebuffer   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Wolfgang Denk
• [U-Boot] [PATCH] Remove remaining mdelay() macros   Anatolij Gustschin
• [U-Boot] [PATCH] include/video.h: drop unused video_printf()   Anatolij Gustschin
• [U-Boot] [PATCH] LCD: change s6e8ax0 panel gamma value   Anatolij Gustschin
• [U-Boot] [PATCH] LCD: support another s6e8ax0 panel type   Anatolij Gustschin
• [U-Boot] [PATCH] cmd_bmp.c: make bmp_display() usable by drivers or board code   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] common/lcd.c: use ARRAY_SIZE   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] common/lcd.c: reduce some CONFIG_LCD_*_LOGO ifdefs   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] common/lcd.c: reduce one CONFIG_LCD_LOGO ifdef   Anatolij Gustschin
• [U-Boot] [PATCH] tegra: Implement oscillator frequency detection   Thierry Reding
• [U-Boot] [PATCH 1/3] tegra: usb: Add USB support to Tamonten boards   Thierry Reding
• [U-Boot] [PATCH 2/3] tegra: medcom: Add device tree support   Thierry Reding
• [U-Boot] [PATCH v5 1/3] LCD: display 32bpp decompressed bitmap image   Anatolij Gustschin
• [U-Boot] Unable to use USB Keyboard on u-boot   Marek Vasut
• [U-Boot] [PATCH 1/7] env_mmc: align buffers using ALLOC_CACHE_ALIGN_BUFFER   Stephen Warren
• [U-Boot] [PATCH 2/7] sf: winbond: Add support for the Winbond W25Q80BL   Stephen Warren
• [U-Boot] [PATCH 3/7] tegra: ventana: store environment in eMMC   Stephen Warren
• [U-Boot] [PATCH 4/7] tegra: whistler: store environment in eMMC   Stephen Warren
• [U-Boot] [PATCH 5/7] tegra: trimslice: store environment in SPI flash   Stephen Warren
• [U-Boot] [PATCH 6/7] tegra: paz00: store environment in eMMC   Stephen Warren
• [U-Boot] [PATCH 7/7] tegra: seaboard: disable SPI, move environment to eMMC   Stephen Warren
• [U-Boot] [PATCH v5 2/3] create lib/tizen directory   Anatolij Gustschin
• [U-Boot] [PATCH] tegra: Implement oscillator frequency detection   Stephen Warren
• [U-Boot] [PATCH 1/3] tegra: usb: Add USB support to Tamonten boards   Stephen Warren
• [U-Boot] [PATCH v6 3/3] EXYNOS: display 32bpp bitmap TIZEN logo   Anatolij Gustschin
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   stefan at roese.nl
• [U-Boot] [PATCH v4 0/1] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] [PATCH] tegra: Implement oscillator frequency detection   Thierry Reding
• [U-Boot] [PATCH 1/3] tegra: usb: Add USB support to Tamonten boards   Thierry Reding
• [U-Boot] [PATCH 4/4] cm-t35: print PCB revision information   Igor Grinberg
• [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Lukasz Majewski
• [U-Boot] [PATCH 2/2 V2] PMIC: SMDK5250: Enable MAX77686 pmic chip   Lukasz Majewski
• [U-Boot] dfu in master?   Lukasz Majewski
• [U-Boot] [PATCH v6 3/3] EXYNOS: display 32bpp bitmap TIZEN logo   Anatolij Gustschin
• [U-Boot] [PATCH] mx51evk: Add LCD support   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/3] mx53: Allow IPUv3 driver to also work on mx53   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] mx5: Rename mx51_fb_init()   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] mx53loco: Add LCD support   Anatolij Gustschin
• [U-Boot] [PATCH V5 RESEND 1/3] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH 1/2] avr32:grasshopper: fix PHY initialisation   Andreas Bießmann
• [U-Boot] [PATCH 2/2] avr32:board.c: fix compile warning   Andreas Bießmann
• [U-Boot] [PATCH v4 25/27] arm/km: implement weak function board_spi_clam_bus/release   Prafulla Wadaskar
• [U-Boot] [PATCH v3] video: atmel/lcd: add LCD driver for new Atmel SoC   Anatolij Gustschin
• [U-Boot] [PATCH v2] video: atmel/lcd: add LCD driver for Atmel new SoC   Anatolij Gustschin
• [U-Boot] [PATCH] MMC: MSHCI: Add MSHCI driver   Rajeshwari Shinde
• [U-Boot] [PATCH 0/4] EXYNOS: Add support for MSHCI driver   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4] EXYNOS: MSHCI: Add clock for EXYNOS5   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4] EXYNOS: Add base address for MSHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4] EXYNOS5: Enable support for MSHCI   Rajeshwari Shinde
• [U-Boot] [PATCH 0/9] arm/km: bugfixes and small corrections   Holger Brunck
• [U-Boot] [PATCH 1/9] arm/km: add board type to boards.cfg   Holger Brunck
• [U-Boot] [PATCH 2/9] arm/km: add piggy mac adress offset for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 3/9] arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE   Holger Brunck
• [U-Boot] [PATCH 4/9] arm/km: use ARRAY_SIZE macro   Holger Brunck
• [U-Boot] [PATCH 5/9] arm/km: fix wrong comment in SDRAM config for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 6/9] arm/km: change maintainer for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 7/9] arm/km: remove CONFIG_RESET_PHY_R   Holger Brunck
• [U-Boot] [PATCH 8/9] arm/km: enable mii cmd   Holger Brunck
• [U-Boot] [PATCH 9/9] km_arm: use filesize for erase in update command   Holger Brunck
• [U-Boot] [PATCH] MPC8xxx: Define cache ops for USB   Marek Vasut
• [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Thierry Reding
• [U-Boot] [PATCH v2 2/7] tegra: medcom: Add device tree support   Thierry Reding
• [U-Boot] [PATCH v2 3/7] tegra: plutux: Add device tree support   Thierry Reding
• [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Thierry Reding
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Thierry Reding
• [U-Boot] [PATCH v2 6/7] tegra: Use SD write-protect GPIO on Tamonten   Thierry Reding
• [U-Boot] [PATCH v2 7/7] tegra: Add Tamonten Evaluation Carrier support   Thierry Reding
• [U-Boot] [PATCH v2 1/2] omap3_dss: add optional framebuffer   Anatolij Gustschin
• [U-Boot] [PATCH v2 2/2] omap3_dss: cosmetic changes   Anatolij Gustschin
• [U-Boot] [PATCH v5 0/5] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
• [U-Boot] [PATCH V2] MPC8xxx: Define cache ops for USB   Marek Vasut
• [U-Boot] [PATCH 0/9] arm/km: bugfixes and small corrections   Prafulla Wadaskar
• [U-Boot] [PATCH V2] MPC8xxx: Define cache ops for USB   Vikram Narayanan
• [U-Boot] [PATCH V2] MPC8xxx: Define cache ops for USB   Joakim Tjernlund
• [U-Boot] [PATCH 5/6] ARM: add support for Network Space v2 Lite and Mini   Simon Guinot
• [U-Boot] [PATCH v2 2/2] omap3_dss: cosmetic changes   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 0/4] ARM: OMAP4+: Miscellaneous fixes   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP4: Correct the lpddr2 io settings register value.   Tom Rini
• [U-Boot] [PATCH 0/7] OMAP5: Add support for OMAP5432 SOC   Tom Rini
• [U-Boot] [PATCH 0/4] cm-t35 updates and non-critical fixes   Tom Rini
• [U-Boot] Add ext4 write support   Uma Shankar
• [U-Boot] [PATCH V5 0/2] *** Add ext4 filesystem support in uboot ***   Uma Shankar
• [U-Boot] [PATCH V5 1/2] ext4fs ls load support   Uma Shankar
• [U-Boot] [PATCH V5 2/2] ext4fs write support   Uma Shankar
• [U-Boot] [PATCH v5 0/5] Kirkwood: add lschlv2 and lsxhl board support   Joe Hershberger
• [U-Boot] [PATCH V2] MPC8xxx: Define cache ops for USB   Marek Vasut
• [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Stephen Warren
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Stephen Warren
• [U-Boot] [PATCH v2 7/7] tegra: Add Tamonten Evaluation Carrier support   Stephen Warren
• [U-Boot] [PATCH V5 0/2] *** Add ext4 filesystem support in uboot ***   Rob Herring
• [U-Boot] dfu in master?   David Lanzendörfer
• [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Thierry Reding
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Thierry Reding
• [U-Boot] [PATCH v5 2/5] net: add helper to generate random mac address   Joe Hershberger
• [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Thierry Reding
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Joe Hershberger
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Kai Poggensee
• [U-Boot] [PATCH 7/7] pxe: add support for parsing local syslinux files   Joe Hershberger
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH v4 1/3] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH v4 2/3] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH v4 3/3] sandbox: Add basic test for command execution   Simon Glass
• [U-Boot] [PATCH v2] pxe: support include files at top-level   Rob Herring
• [U-Boot] [PATCH v2] pxe: add support for parsing local syslinux files   Rob Herring
• [U-Boot] [PATCH v5 4/5] net: add eth_setenv_enetaddr_by_index()   Joe Hershberger
• [U-Boot] [PATCH v2] pxe: add support for parsing local syslinux files   Joe Hershberger
• [U-Boot] [PATCH v5 5/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v6 0/3] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v6 1/3] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v6 2/3] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH v6 3/3] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH] Kirkwood: declare mpp config static and const   Michael Walle
• [U-Boot] usb to ethernet adaptor support   孟令锋
• [U-Boot] [PATCH 2/2 v10] ARM : Add support for MINI2440 (s3c2440).   刘力
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Troy Kisky
• [U-Boot] [PATCH 2/3] mx6qsabrelite: select CONFIG_CMD_RSMODE   Troy Kisky
• [U-Boot] [PATCH 3/3] mx53evk: select CONFIG_CMD_RSMODE   Troy Kisky
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Dirk Behme
• [U-Boot] [PATCH 0/4] ARM: OMAP4+: Miscellaneous fixes   R, Sricharan
• [U-Boot] [PATCH 0/2] ANSI terminal Bootmenu   Pali Rohár
• [U-Boot] [PATCH 1/2] menu: Added support to use user defined functions   Pali Rohár
• [U-Boot] [PATCH 2/2] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Eric Nelson
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Eric Nelson
• [U-Boot] [PATCH] Kirkwood: declare mpp config static and const   Luka Perkov
• [U-Boot] [PATCH v3] [resend] kwboot: boot kirkwood SoCs over a serial link   Luka Perkov
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] MMC: MSHCI: Add MSHCI driver   Rajeshwari Birje
• [U-Boot] [PATCH v2] video: atmel/lcd: add LCD driver for Atmel new SoC   Bo Shen
• [U-Boot] [PATCH v3] video: atmel/lcd: add LCD driver for new Atmel SoC   Bo Shen
• [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
• [U-Boot] [PATCH] Kirkwood: declare mpp config static and const   Prafulla Wadaskar
• [U-Boot] msm7630 mainline request   Srikanth Reddy
• [U-Boot] [PATCH 2/3] usb/gadget: add the fastboot gadget   Macpaul Lin
• [U-Boot] [PATCH] mx53loco: Fix revision of Dialog boards   Fabio Estevam
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Dirk Behme
• [U-Boot] U-boot on xup-ml509 board   Wesley Gonçalves
• [U-Boot] [PATCH] Kirkwood: declare mpp config static and const   Michael Walle
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Michael Walle
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Michael Walle
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Michael Walle
• [U-Boot] AM3703 Overo SPL/u-boot booting woes   Charles Manning
• [U-Boot] Detecting board revision that needs to be done after relocation   Fabio Estevam
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   坚石
• [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Andreas Bießmann
• [U-Boot] [PATCH 3/4 V2] USB: Drop cache flush bloat in EHCI-HCD   Liu Gang
• [U-Boot] [PATCH 2/3] spi/kirkwood: support spi_claim/release_bus functions   Valentin Longchamp
• [U-Boot] [PATCH 3/3] spi/kirkwood: add weak functions board_spi_claim/release_bus   Valentin Longchamp
• [U-Boot] [PATCH 3/4 V2] USB: Drop cache flush bloat in EHCI-HCD   Marek Vasut
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Valentin Longchamp
• [U-Boot] [PATCH] MPC8xxx: Define cache ops for USB   Liu Gang
• [U-Boot] [PATCH] MPC8xxx: Define cache ops for USB   Marek Vasut
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Prafulla Wadaskar
• [U-Boot] [PATCH 2/3] spi/kirkwood: support spi_claim/release_bus functions   Prafulla Wadaskar
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Valentin Longchamp
• [U-Boot] [PATCH 2/3] spi/kirkwood: support spi_claim/release_bus functions   Valentin Longchamp
• [U-Boot] [PATCH] MMC: MSHCI: Add MSHCI driver   Jaehoon Chung
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Prafulla Wadaskar
• [U-Boot] [PATCH 3/3] spi/kirkwood: add weak functions board_spi_claim/release_bus   Prafulla Wadaskar
• [U-Boot] u-boot flow   Shiju T
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Prafulla Wadaskar
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Valentin Longchamp
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Prafulla Wadaskar
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Eric Nelson
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   Marek Vasut
• [U-Boot] Detecting board revision that needs to be done after relocation   Marek Vasut
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Marek Vasut
• [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   R, Sricharan
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Thierry Reding
• [U-Boot] [PATCH v2] mx53loco: Fix revision of Dialog boards   Fabio Estevam
• [U-Boot] Detecting board revision that needs to be done after relocation   Fabio Estevam
• [U-Boot] [PATCH v2 5/7] tegra: Implement gpio_early_init() on Tamonten   Stephen Warren
• [U-Boot] [PATCH 1/3] kirkwood: add kirkwood_mpp_save/restore functions   Michael Walle
• [U-Boot] [PATCH 01/10] mx53loco: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 02/10] mx53evk: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 03/10] mx53ard: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 04/10] mx53smd: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 05/10] mx51evk: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 06/10] efikamx: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 07/10] vision2: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 08/10] ima3-mx53: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 09/10] mx6qarm2: Remove unused SOBJS   Fabio Estevam
• [U-Boot] [PATCH 10/10] mx6qsabrelite: Remove unused SOBJS   Fabio Estevam
• [U-Boot] IOMUX setting for NAND boot   Vikram Narayanan
• [U-Boot] [PATCH 06/10] efikamx: Remove unused SOBJS   Marek Vasut
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Michael Walle
• [U-Boot] Detecting board revision that needs to be done after relocation   Andrew E. Mileski
• [U-Boot] R: Re: Question about md output   Wolfgang Denk
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Wolfgang Denk
• [U-Boot] [PATCH 2/8] m28evk: use "M28EVK U-Boot =>" as prompt   Wolfgang Denk
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Wolfgang Denk
• [U-Boot] [PATCH 1/8] m28evk: use same notation to alloc the 128kB stack   Wolfgang Denk
• [U-Boot] [PATCH 0/8] Minor fixes and start of consolidation onto mxs SoC   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Wolfgang Denk
• [U-Boot] [PATCH 0/8] Minor fixes and start of consolidation onto mxs SoC   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
• [U-Boot] [PATCH] Add gc-section support for ARM   Wolfgang Denk
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Marek Vasut
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Wolfgang Denk
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Wolfgang Denk
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Wolfgang Denk
• [U-Boot] [PATCH] mx53: Fix mask for SATA reference clock   Fabio Estevam
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Lucas Stach
• [U-Boot] [PATCH 2/3] tegra: add ULPI on USB2 funcmux entry   Lucas Stach
• [U-Boot] [PATCH 3/3] tegra: usb: fix wrong error check   Lucas Stach
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Michael Walle
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Stephen Warren
• [U-Boot] [PATCH 2/3] tegra: add ULPI on USB2 funcmux entry   Stephen Warren
• [U-Boot] [PATCH 3/3] tegra: usb: fix wrong error check   Stephen Warren
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH v3 02/21] net: Move MAC-seeded rand out of bootp.c   Michael Walle
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Tom Warren
• [U-Boot] [PATCH 3/3] tegra: usb: fix wrong error check   Tom Warren
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Fabio Estevam
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Stephen Warren
• [U-Boot] [PATCH 09/10] mx6qarm2: Remove unused SOBJS   Liu Hui-R64343
• [U-Boot] [PATCH 10/10] mx6qsabrelite: Remove unused SOBJS   Liu Hui-R64343
• [U-Boot] problem while making kernel up   Manukumar
• [U-Boot] [PATCH] mmc: s5p_sdhci: fix wrong value for samsung-soc   Jaehoon Chung
• [U-Boot] [PATCH 0/3] OMAP: Detect reset type and handle sdram init after warm rese   Lokesh Vutla
• [U-Boot] [PATCH 1/3] ARM: OMAP3+: Detect reset type   Lokesh Vutla
• [U-Boot] [PATCH 2/3] OMAP4+: Handle sdram init after warm reset   Lokesh Vutla
• [U-Boot] [PATCH 3/3] OMAP4+: Force DDR in self-refresh after warm reset   Lokesh Vutla
• [U-Boot] [PATCH 1/2] patman: Change the location of patman config file   Simon Glass
• [U-Boot] R: Re: Question about md output   Anthony Foiani
• [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
• [U-Boot] [PATCH v2] mx28evk: Scan only first 128MB of DRAM to avoid memory wraparound   Marek Vasut
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Marek Vasut
• [U-Boot] FDT: Question about embedded fdt enable   Simon Glass
• [U-Boot] malloc failing in U-Boot   Sandeep Kumar
• [U-Boot] FDT: Question about embedded fdt enable   Donghwa Lee
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   Marek Vasut
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   Wolfgang Denk
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   Marek Vasut
• [U-Boot] [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs   Otavio Salvador
• [U-Boot] [PATCH] MMC: MSHCI: Add MSHCI driver   Rajeshwari Birje
• [U-Boot] How to debug uboot code on Samsung S5pv210 chip by eclipse and JTAG?   Wolfgang Denk
• [U-Boot] FDT: Question about embedded fdt enable   Simon Glass
• [U-Boot] patchwork cleanup   Prafulla Wadaskar
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Konstantin Sinyuk
• [U-Boot] [PATCH v2 0/4] kirkwood spi_claim/release_bus support   Valentin Longchamp
• [U-Boot] [PATCH v2 1/4] kirkwood: add kirkwood_mpp_read function   Valentin Longchamp
• [U-Boot] [PATCH v2 2/4] kw_spi: backup and reset the MPP of the chosen CS pin   Valentin Longchamp
• [U-Boot] [PATCH v2 3/4] kw_spi: support spi_claim/release_bus functions   Valentin Longchamp
• [U-Boot] [PATCH v2 4/4] kw_spi: add weak functions board_spi_claim/release_bus   Valentin Longchamp
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Tom Warren
• [U-Boot] problem while making kernel up   Scott Wood
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Stephen Warren
• [U-Boot] FDT: Question about embedded fdt enable   Stephen Warren
• [U-Boot] [PATCH 1/3] tegra: add a method to query RAM size from hardware   Stephen Warren
• [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Stephen Warren
• [U-Boot] [PATCH 0/3] omap: fix bugs in automatic emif setup code   Steve Sakoman
• [U-Boot] [PATCH 1/3] omap: fix compile error in emif-common.c   Steve Sakoman
• [U-Boot] [PATCH 2/3] omap: emif: deal with rams that return duplicate mr data on all byte lanes   Steve Sakoman
• [U-Boot] [PATCH 3/3] omap: emif: fix bug in manufacturer code test   Steve Sakoman
• [U-Boot] [PATCH] omap: am33xx: accomodate input clocks other than 24 Mhz   Steve Sakoman
• [U-Boot] [ANNOUNCE] mboot - U-boot clone without blackjack and hookers   Sergey Mironov
• [U-Boot] [PATCH] arm: Tegra: Use ODMDATA from BCT in IRAM   Tom Warren
• [U-Boot] [PATCH] ARM: support for cache coherent allocations   Ilya Yanok
• [U-Boot] [PATCH] arm: Tegra: Use ODMDATA from BCT in IRAM   Stephen Warren
• [U-Boot] [PATCH] MMC: MSHCI: Add MSHCI driver   Jaehoon Chung
• [U-Boot] problem while making kernel up   Manukumar
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Stefan Roese
• [U-Boot] [PATCH v2 1/4] kirkwood: add kirkwood_mpp_read function   Prafulla Wadaskar
• [U-Boot] [PATCH v2 2/4] kw_spi: backup and reset the MPP of the chosen CS pin   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/4] kirkwood: add kirkwood_mpp_read function   Valentin Longchamp
• [U-Boot] [PATCH v2 3/4] kw_spi: support spi_claim/release_bus functions   Prafulla Wadaskar
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Igor Grinberg
• [U-Boot] [PATCH v2 2/4] kw_spi: backup and reset the MPP of the chosen CS pin   Valentin Longchamp
• [U-Boot] [PATCH v2 4/4] kw_spi: add weak functions board_spi_claim/release_bus   Prafulla Wadaskar
• [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Igor Grinberg
• [U-Boot] [PATCH v2 1/4] kirkwood: add kirkwood_mpp_read function   Prafulla Wadaskar
• [U-Boot] [PATCH] tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it   Igor Grinberg
• [U-Boot] [PATCH] bootcount: Move bootcount.c from arch/powerpc/lib to lib   Stefan Roese
• [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)   Stefan Roese
• [U-Boot] [PATCH] MAKEALL: Add spear platform target to compile all SPEAr boards   Stefan Roese
• [U-Boot] Hidden BPs i gdb   Joakim Tjernlund
• [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Minkyu Kang
• [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Marek Vasut
• [U-Boot] [PATCH] bootcount: Move bootcount.c from arch/powerpc/lib to lib   Heiko Schocher
• [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
• [U-Boot] [PATCH] bootcount: Move bootcount.c from arch/powerpc/lib to lib   Stefan Roese
• [U-Boot] [PATCH 1/2] tegra: add ULPI on USB2 funcmux entry   Lucas Stach
• [U-Boot] [PATCH 2/2] tegra: usb: fix wrong error check   Lucas Stach
• [U-Boot] [PATCH 2/2] tegra: usb: fix wrong error check   Marek Vasut
• [U-Boot] [PATCH v2 1/4] kirkwood: add kirkwood_mpp_read function   Valentin Longchamp
• [U-Boot] [PATCH v3 0/5] kirkwood spi_claim/release_bus support   Valentin Longchamp
• [U-Boot] [PATCH v3 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Valentin Longchamp
• [U-Boot] [PATCH v3 2/5] kirkwood: fix calls to kirkwood_mpp_conf   Valentin Longchamp
• [U-Boot] [PATCH v3 3/5] kw_spi: backup and reset the MPP of the chosen CS pin   Valentin Longchamp
• [U-Boot] [PATCH v3 4/5] kw_spi: support spi_claim/release_bus functions   Valentin Longchamp
• [U-Boot] [PATCH v3 5/5] kw_spi: add weak functions board_spi_claim/release_bus   Valentin Longchamp
• [U-Boot] [PATCH] mmc: Remove unused item flags in struct mmc_cmd   Kaspter Ju
• [U-Boot] facing issues with malloc in U-Boot   Sandeep Kumar
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Tom Warren
• [U-Boot] problem while making kernel up   Scott Wood
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Stephen Warren
• [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Stephen Warren
• [U-Boot] [PATCH 1/9] mx6: Allow mx6 to access the IPUv3 registers   Fabio Estevam
• [U-Boot] [PATCH 2/9] video: Rename CONFIG_VIDEO_MX5   Fabio Estevam
• [U-Boot] [PATCH 3/9] ipu_common: Only apply the erratum to MX51   Fabio Estevam
• [U-Boot] [PATCH 4/9] ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53   Fabio Estevam
• [U-Boot] [PATCH 5/9] ipu_common: Rename MXC_CCM_BASE   Fabio Estevam
• [U-Boot] [PATCH 6/9] ipu_common: Do not hardcode the ipu_clk frequency   Fabio Estevam
• [U-Boot] [PATCH 7/9] mxc_i2c: Allow MX6Q I2C3 to work   Fabio Estevam
• [U-Boot] [PATCH 8/9] ipu_common: Add ldb_clk for use in parenting the pixel clock   Fabio Estevam
• [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Fabio Estevam
• [U-Boot] [PATCH 2/2] tegra: usb: fix wrong error check   Stephen Warren
• [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Fabio Estevam
• [U-Boot] [PATCH v7 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH v7 1/4] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH v7 2/4] net: use common rand()/srand() functions   Michael Walle
• [U-Boot] [PATCH v7 3/4] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
• [U-Boot] [PATCH v7 2/4] net: use common rand()/srand() functions   Joe Hershberger
• [U-Boot] [PATCH v7 2/4] net: use common rand()/srand() functions   Joe Hershberger
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Scott Wood
• [U-Boot] [PATCH 1/2] tegra: add ULPI on USB2 funcmux entry   Lucas Stach
• [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Tom Warren
• [U-Boot] [PATCH v7 2/4] net: use common rand()/srand() functions   Michael Walle

Last message date: Thu May 31 23:45:29 CEST 2012
Archived on: Thu May 31 23:45:40 CEST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...