[U-Boot] [PATCH] sdp4430: fix mux configuration for SYS_NIRQ2

[Peter Ujfalusi]

SYS_NIRQ2 is servicing the interrupt from twl6040.
Configure the SYS_NIRQ2 so we can actually receive the interrupts.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 board/ti/sdp4430/sdp4430_mux_data.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 0a20968..beb7c7a 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -216,7 +216,7 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
 	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
 	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
-	{SYS_NIRQ2, (M7)},						/* sys_nirq2 */
+	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
 	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
 	{SYS_BOOT1, (M3)},						/* gpio_185 */
 	{SYS_BOOT2, (PTD | IEN | M3)},					/* gpio_186 */
-- 
1.7.8.6