[U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs over a serial link

Prafulla Wadaskar prafulla at marvell.com
Thu May 24 08:53:30 CEST 2012



> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
> bounces at lists.denx.de] On Behalf Of Wolfgang Denk
> Sent: 22 May 2012 03:30
> To: Daniel Stodden
> Cc: U-Boot
> Subject: Re: [U-Boot] [PATCH v3] kwboot: boot Marvell Kirkwood SoCs
> over a serial link
> 
> Dear Daniel Stodden,
> 
> In message <1337635983-12220-2-git-send-email-
> daniel.stodden at googlemail.com> you wrote:
> > The kwboot program boots boards based on Marvell's Kirkwood platform
> > via Xmodem over their integrated UART.
> >
> > Signed-off-by: Daniel Stodden <daniel.stodden at googlemail.com>
> > Acked-by: Luka Perkov <uboot at lukaperkov.net>
> > Tested-By: Holger Brunck <holger.brunck at keymile.com>
> > Tested-By: David Purdy <david.c.purdy at gmail.com>
> > Tested-by: Simon Guinot <simon.guinot at sequanux.org>
> > ---
> >  doc/kwboot.1   |   84 +++++++
> >  tools/Makefile |    6 +
> >  tools/kwboot.c |  742
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 832 insertions(+)
> >  create mode 100644 doc/kwboot.1
> >  create mode 100644 tools/kwboot.c
> 
> This is patch v3, but there is no change log given.  The change log is
> mandatory.  Please fix.

Dear Daniel

Pls repost the patch with all changelog information as per guidelines @ http://www.denx.de/wiki/U-Boot/Patches

Also pls mention [repost] in the subject line if you are just adding the changelogs.

If you have any further changes you should post it as V4.

Regards..
Prafulla . . .


More information about the U-Boot mailing list