[U-Boot] [PATCH v2 4/6] km/common: add support for second flash
Holger Brunck
holger.brunck at keymile.com
Fri May 4 10:30:16 CEST 2012
From: Andreas Huber <andreas.huber at keymile.com>
Add support for a second flash.
By default, a single flash chip is set up:
- called 'boot'
- mtd name for ubi 'ubi0'
MTDIDS and MTDPARTS may be overwritten to add a second flash.
The 'ubiattach' command is featured in two versions:
- if CONFIG_KM_UBI_PARTITION_NAME_APP is not defined:
this is the version as up to now
- if CONFIG_KM_UBI_PARTITION_NAME_APP is defined:
a check on 'actual_bank' will be done to determine the flash to boot
from.
Use CONFIG_KM_UBI_PARTITION_NAME_BOOT and
CONFIG_KM_UBI_PARTITION_NAME_APP to define where to put the bootloader
and the applications.
Example:
In the board config do:
... snip ...
"boot:" \
"768k(u-boot)," \
"128k(env)," \
"128k(envred)," \
"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \
"app:" \
"-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
... snap ...
You may also need to enable the second flash:
... snip ...
/* additional featured for COGE5 */
... snap ...
Signed-off-by: Andreas Huber <andreas.huber at keymile.com>
cc: Kim Phillips <kim.phillips at freescale.com>
cc: Valentin Longchamp <valentin.longchamp at keymile.com>
cc: Gerlando Falauto <gerlando.falauto at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
---
v2:
- v1 introduces compile error for 82xx boards, now fixed
include/configs/km/keymile-common.h | 34 +++++++++++++++++++++++++---------
include/configs/km/km82xx-common.h | 2 +-
include/configs/km/km83xx-common.h | 11 ++++++++---
include/configs/km/km_arm.h | 15 +++++++++------
4 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 7a01705..4f606a0 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -126,12 +126,29 @@
"netdev=eth0\0"
#endif
-#ifndef CONFIG_KM_UBI_PARTITION_NAME
-#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
-#endif
-#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME
-#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0"
-#endif
+#ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+
+#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
+/* one flash chip only called boot */
+/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+# define CONFIG_KM_UBI_LINUX_MTD \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT
+# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
+ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
+#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
+/* two flash chips called boot and app */
+/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+/* app: CONFIG_KM_UBI_PARTITION_NAME_APP */
+# define CONFIG_KM_UBI_LINUX_MTD \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
+# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
+ "ubiattach=if test ${boot_bank} -eq 0; then; " \
+ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; " \
+ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
+#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
#define xstr(s) str(s)
#define str(s) #s
@@ -173,7 +190,7 @@
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
" mem=${kernelmem} init=${init}" \
" phram.phram=phvar,${varaddr}," xstr(CONFIG_KM_PHRAM) \
- " ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
+ " " CONFIG_KM_UBI_LINUX_MTD " " \
CONFIG_KM_DEF_BOOT_ARGS_CPU \
"\0" \
"addpanic=" \
@@ -199,10 +216,9 @@
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
"cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \
- "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME "\0" \
"ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
- ""
+ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
/*
* constants
diff --git a/include/configs/km/km82xx-common.h b/include/configs/km/km82xx-common.h
index 02a82a6..2c763bb 100644
--- a/include/configs/km/km82xx-common.h
+++ b/include/configs/km/km82xx-common.h
@@ -73,7 +73,7 @@
"128k(env)," \
"128k(envred)," \
"3072k(free)," \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+ "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ")"
/*
* Default environment settings
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 06ecb8a..2c266fa 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -15,13 +15,18 @@
#include "keymile-common.h"
#include "km-powerpc.h"
-#define MTDIDS_DEFAULT "nor0=boot"
-#define MTDPARTS_DEFAULT "mtdparts=" \
+#ifndef MTDIDS_DEFAULT
+# define MTDIDS_DEFAULT "nor0=boot"
+#endif /* MTDIDS_DEFAULT */
+
+#ifndef MTDPARTS_DEFAULT
+# define MTDPARTS_DEFAULT "mtdparts=" \
"boot:" \
"768k(u-boot)," \
"128k(env)," \
"128k(envred)," \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+ "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
+#endif /* MTDPARTS_DEFAULT */
#define CONFIG_MISC_INIT_R
/*
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index c73a10c..011f838 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -229,11 +229,15 @@ int get_scl(void);
#define FLASH_GPIO_PIN 0x00010000
-#define MTDIDS_DEFAULT "nand0=orion_nand"
-/* test-only: partitioning needs some tuning, this is just for tests */
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "orion_nand:" \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+#ifndef MTDIDS_DEFAULT
+# define MTDIDS_DEFAULT "nand0=orion_nand"
+#endif /* MTDIDS_DEFAULT */
+
+#ifndef MTDPARTS_DEFAULT
+# define MTDPARTS_DEFAULT "mtdparts=" \
+ "orion_nand:" \
+ "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
+#endif /* MTDPARTS_DEFAULT */
#define CONFIG_KM_DEF_ENV_UPDATE \
"update=" \
@@ -257,7 +261,6 @@ int get_scl(void);
""
#if defined(CONFIG_SYS_NO_FLASH)
-#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
#undef CONFIG_FLASH_CFI_MTD
#undef CONFIG_JFFS2_CMDLINE
#endif
--
1.7.1
More information about the U-Boot
mailing list