[U-Boot] [PATCH 00/13] M28EVK/i.MX28 improvements

[Stefano Babic]

On 01/05/2012 23:09, Marek Vasut wrote:
> These are some improvements that were stuck in my tree for a while, time to
> expunge them, please consider applying.
> 
> Tested on:
> * DENX M28EVK v2.0
> * DENX M28EVK v1.1
> * Mysterious board #1 ...
> * Unnamed board #2 ...
> 
> Marek Vasut (13):
>   FEC: Abstract out register setup
>   M28EVK: Implement support for new board V2.0
>   M28EVK: Add SD update command
>   i.MX28: Improve passing of data from SPL to U-Boot
>   i.MX28: Implement boot pads sampling and reporting
>   i.MX28: Add LCDIF register definitions
>   i.MX28: Shut down the LCD controller before reset
>   i.MX28: Add LRADC register definitions
>   i.MX28: Add LRADC init to i.MX28 SPL
>   i.MX28: Reorder battery status functions in SPL
>   i.MX28: Add battery boot components to SPL
>   i.MX28: Check if WP detection is implemented at all
>   i.MX28: Avoid redefining serial_put[cs]()

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================