[U-Boot] [PATCH 3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards

[Stefano Babic]

On 30/04/2012 20:12, Fabio Estevam wrote:
> There are two types of mx53loco boards: initial boards were built with a Dialog
> DA9053 PMIC and more recent version is based on a Freescale MC34708 PMIC.
> 
> Add DA9053 PMIC support and adjust the required voltages and clocks for running
> the CPU at 1GHz.
> 
> Tested on both versions of mx53loco boards.
> 
> In the case of a MC34708-based board the CPU operating voltage remains at 800MHz.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

Acked-by : Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================