[U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets

[Wolfgang Denk]

Dear Marek Vasut,

In message <201205231127.51935.marex at denx.de> you wrote:
> 
> Because there'd then be no way to tell apart u-boot.bin.sd for another target 
> but mx28.

So what?  We also use "u-boot.bin" for all targets.  What's the
difference?

> > Would it not be useful to automatically build these images when
> > someone runs just "make -j8 -s m28evk" (or "./MAKEALL m28evk") ?
> 
> Usually, you just want to update the system. You don't need the full image for 
> that in NAND case. You do in SD card. Ok, it might be useful.

Indeed. I consider it useful, too.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The explanation requiring the fewest assumptions is the  most  likely
to be correct.                                    -- William of Occam