[U-Boot] [PATCH] i.MX28: Add delay after CPU bypass is cleared

[Detlev Zundel]

Hi Stefano,

> On 04/05/2012 13:32, Marek Vasut wrote:
>> This solves issues when larger amount of DRAM is used, like 256MB.
>> Behave the same in case of CPU bypass as we do in case of EMI
>> bypass, but wait 15 ms. We need to wait until the clock domain
>> stabilizes.
>> 
>> This issue seemed to have been caused by not waiting after frobbing
>> with the CPU bypass, it was unrelated to memory, but had a direct
>> impact, causing trouble. This was yet another X-File of the
>> imx-bootlets, sigh. The conclusion is, trying a semi-random delay
>> (there is delay after the EMI bypass change), the issue is fixed.
>> 
>> Another possible explanation is that we do not do the "simple memory
>> test" FSL does in their imx-bootlets (1000 R/W cycles to/from piece of
>> the memory, while also outputing something on the serial port). This
>> might have caused the similar delay in the imx-bootlets and therefore
>> they didn't need to add this explicitly.
>> 
>> For now, this seems good fix enough, but to me, whole that memory
>> init code in imx-bootlets is completely flunked and it'd need deeper
>> investigation.
>> 
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Wolfgang Denk <wd at denx.de>
>> Cc: Detlev Zundel <dzu at denx.de>
>> Cc: Stefano Babic <sbabic at denx.de>
>> Cc: Fabio Estevam <festevam at gmail.com>
>> ---
>>  arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c |    2 ++
>>  1 file changed, 2 insertions(+)
>> 
>> V2: Change the description, this issue seemed to have been caused by not
>>     waiting after frobbing with the CPU bypass, it was unrelated to memory,
>>     but had a direct impact, causing trouble. This was yet another X-File
>>     of the imx-bootlets, sigh.
>> V3: Add more conspiracy theories into the commit message.
>> 
>> diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
>> index 0d13537..9fa5d29 100644
>> --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
>> +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
>> @@ -149,6 +149,8 @@ void mx28_mem_setup_cpu_and_hbus(void)
>>  	/* Disable CPU bypass */
>>  	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
>>  		&clkctrl_regs->hw_clkctrl_clkseq_clr);
>> +
>> +	early_delay(15000);
>>  }
>>  
>
> It is fine with me
>
> Acked-by: Stefano Babic <sbabic at denx.de>

I'm also content with the commit message now, so I don't want to block
this anymore.

Acked-by: Detlev Zundel <dzu at denx.de>

Cheers
  Detlev

-- 
Sab|bert|jahr - Umgangssprachlich für Elternzeit
                  -- "Wortschatz" v. Sascha Lobo
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de