[U-Boot] [PATCH 7/8] I2C: Add support for Multi channel

[Rajeshwari Shinde]

This adds multiple i2c channel support for I2C.

Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
 drivers/i2c/s3c24x0_i2c.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 61b54a9..39875cd 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -189,6 +189,33 @@ static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus)
 	i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 }
 
+/*
+ * MULTI BUS I2C support
+ */
+
+#ifdef CONFIG_I2C_MULTI_BUS
+int i2c_set_bus_num(unsigned int bus)
+{
+	struct s3c24x0_i2c *i2c;
+
+	if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
+		debug("Bad bus: %d\n", bus);
+		return -1;
+	}
+
+	g_current_bus = bus;
+	i2c = get_base_i2c(g_current_bus);
+	i2c_bus_init(i2c, g_current_bus);
+
+	return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+	return g_current_bus;
+}
+#endif
+
 #ifdef CONFIG_EXYNOS5
 void i2c_init(int speed, int slaveadd)
 {
-- 
1.7.4.4