[U-Boot] [PATCH] mx53loco: Remove unneeded gpio_set_value()

[Stefano Babic]

On 07/05/2012 22:42, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> There is no need to set the VBUS power enable to 0 first and then to 1.
> 
> Set it to 1 in the gpio_direction_output() function.
> 
> While at it, use the standard naming convention for the GPIO comment.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================