[U-Boot] [PATCH 9/9] tegra2: Remove USE_PRIVATE_LIBGCC and armv4t build flags

[Stephen Warren]

On 05/10/2012 01:02 AM, Allen Martin wrote:
> These flags were necessary when building tegra2 as a single binary
> that supported ARM7TDMI and Cortex A9.  Now that the ARM7TDMI support
> is split into a separate SPL, this is no longer necessary.

> diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra2/config.mk

> -# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build this
> -# file with compatible flags
> -ifdef CONFIG_TEGRA2
> -CFLAGS_arch/arm/lib/board.o += -march=armv4t
> -endif

That makes sense since the CFLAGS for the SPL build will be set up
appropriately for the AVP.

> -USE_PRIVATE_LIBGCC = yes

However, we force this because the toolchains we typically use for
U-Boot are targeted at the A9 CPUs, and hence the libgcc there contains
ARMv7 instructions. Did I miss something in this series or earlier that
uses a different toolchain for the SPL, which includes an ARMv4 build of
libgcc?