[U-Boot] [PATCH 2/2] tegra: Compulab TrimSlice board support

Stephen Warren swarren at wwwdotorg.org
Thu May 17 01:54:07 CEST 2012


From: Stephen Warren <swarren at nvidia.com>

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 MAINTAINERS                             |    1 +
 board/compulab/dts/tegra2-trimslice.dts |   57 ++++++++++++++++++++
 board/compulab/trimslice/Makefile       |   49 +++++++++++++++++
 board/compulab/trimslice/trimslice.c    |   76 ++++++++++++++++++++++++++
 boards.cfg                              |    1 +
 include/configs/trimslice.h             |   89 +++++++++++++++++++++++++++++++
 6 files changed, 273 insertions(+), 0 deletions(-)
 create mode 100644 board/compulab/dts/tegra2-trimslice.dts
 create mode 100644 board/compulab/trimslice/Makefile
 create mode 100644 board/compulab/trimslice/trimslice.c
 create mode 100644 include/configs/trimslice.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7c161db..9d35c0e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -912,6 +912,7 @@ Stephen Warren <swarren at nvidia.com>
 
 	ventana		Tegra2 (ARM7 & A9 Dual Core)
 	paz00		Tegra2 (ARM7 & A9 Dual Core)
+	trimslice	Tegra2 (ARM7 & A9 Dual Core)
 	whistler	Tegra2 (ARM7 & A9 Dual Core)
 
 Thomas Weber <weber at corscience.de>
diff --git a/board/compulab/dts/tegra2-trimslice.dts b/board/compulab/dts/tegra2-trimslice.dts
new file mode 100644
index 0000000..c707eb8
--- /dev/null
+++ b/board/compulab/dts/tegra2-trimslice.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb at c5008000";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	clocks {
+		clk_32k: clk_32k {
+			clock-frequency = <32000>;
+		};
+		osc {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	clock at 60006000 {
+		clocks = <&clk_32k &osc>;
+	};
+
+	serial at 70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c at 7000c000 {
+		status = "disabled";
+	};
+
+	i2c at 7000c400 {
+		status = "disabled";
+	};
+
+	i2c at 7000c500 {
+		status = "disabled";
+	};
+
+	i2c at 7000d000 {
+		status = "disabled";
+	};
+
+	usb at c5004000 {
+		status = "disabled";
+	};
+
+	usb at c5004000 {
+		status = "disabled";
+	};
+};
diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile
new file mode 100644
index 0000000..bf624f4
--- /dev/null
+++ b/board/compulab/trimslice/Makefile
@@ -0,0 +1,49 @@
+#
+#  (C) Copyright 2010-2012
+#  NVIDIA Corporation <www.nvidia.com>
+#
+#
+#  See file CREDITS for list of people who contributed to this
+#  project.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#  MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../../nvidia/common)
+endif
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+COBJS	+= ../../nvidia/common/board.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
new file mode 100644
index 0000000..3d50999
--- /dev/null
+++ b/board/compulab/trimslice/trimslice.c
@@ -0,0 +1,76 @@
+/*
+ *  (C) Copyright 2010-2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/mmc.h>
+#include <asm/gpio.h>
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
+/*
+ * Routine: gpio_config_uart
+ * Description: Does nothing on TrimSlice - no UART-related GPIOs.
+ */
+void gpio_config_uart(void)
+{
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+	funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT);
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
+
+	/* For CD GPIO PP1 */
+	pinmux_tristate_disable(PINGRP_DAP3);
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	uchar val;
+	int ret;
+
+	debug("board_mmc_init called\n");
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+
+	/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
+	tegra2_mmc_init(0, 4, -1, GPIO_PP1);
+
+	/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
+	tegra2_mmc_init(3, 4, -1, -1);
+
+	return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index a96b7d7..e983b05 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -260,6 +260,7 @@ jornada                      arm         sa1100
 plutux                       arm         armv7       plutux              avionic-design tegra2
 medcom                       arm         armv7       medcom              avionic-design tegra2
 paz00                        arm         armv7       paz00               compal         tegra2
+trimslice                    arm         armv7       trimslice           compulab       tegra2
 atngw100                     avr32       at32ap      -                   atmel          at32ap700x
 atstk1002                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1003                    avr32       at32ap      atstk1000           atmel          at32ap700x
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
new file mode 100644
index 0000000..dafca5e
--- /dev/null
+++ b/include/configs/trimslice.h
@@ -0,0 +1,89 @@
+/*
+ *  (C) Copyright 2010-2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+#include "tegra2-common.h"
+
+/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra2-trimslice
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT		"Tegra2 (TrimSlice) # "
+#define CONFIG_TEGRA2_BOARD_STRING	"NVIDIA Trimslice"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTA
+#define CONFIG_TEGRA2_UARTA_GPU
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
+#define CONFIG_SYS_BOARD_ODMDATA	0x300c0011 /* lp?, 1GB, UARTA */
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS		4
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA2_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* Environment not stored */
+#define CONFIG_ENV_IS_NOWHERE
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
+#endif /* __CONFIG_H */
-- 
1.7.0.4



More information about the U-Boot mailing list