[U-Boot] [PATCH 2/2] ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT

[Tom Rini]

On 05/09/2012 12:44 AM, Thomas Weber wrote:
> Hello Tom & Peter,
>
> On 05/08/12 19:29, Tom Rini wrote:
>> As originally reported against beagleboard we currently have the
>> following error message reported in SPL:
>>
>> U-Boot SPL 2012.04-00020-gb8310b9-dirty (Apr 25 2012 - 18:49:57)
>> Texas Instruments Revision detection unimplemented
>> OMAP SD/MMC: 0
>> timed out in wait_for_bb: I2C_STAT=1000
>> reading u-boot.img
>> ....
>>
>> The reason for above message is that when booting from MMC, I2C needs to
>> be initialized to talk with the TWL4030. On OMAP3 I2C is only
>> initalized in SPL if CONFIG_SPL_BOARD_INIT is set.
> On Tricorder there is no such message. I thought the I2C to TWL4030 is
> initialized by the ROM code.
> And why can the SPL read the u-boot.img in the next step?

Things must be setup to a certain extent or we couldn't have been loaded 
by ROM, yes.  Since am35x parts are a different family from the omap3 
boards, I'll double check what the am3517 evm I have says here as well. 
  For correctness however, we currently are turning on the i2c support 
in SPL and then not using it.  So something should be changed :)

-- 
Tom