[U-Boot] [PATCH 0/7] OMAP5: Add support for OMAP5432 SOC

[Lokesh Vutla]

This patch series support OMAP5432 in Mainline U-boot.
The major difference from OMAP5430 is that it supports DDR3 memory.
Things to be done for supporting DDR3:
1) ioconfig for ddr3
2) Initialization sequence and ddr3 leveling
3) Change in DPLL_CORE locking sequence
4) Voltage changes

This series has been tested on
OMAP4430 sdp
OMAP5430sevm
OMAP5432uevm

MAKEALL has been tested for all armv7 boards to ensure no build breakage.

Lokesh Vutla (7):
  OMAP5: Adding correct Control id code for OMAP5430
  OMAP5: ADD chip detection for OMAP5432 SOC
  OMAP5: Configure the io settings for omap5432 uevm board
  OMAP5: ADD precalculated timings for ddr3
  OMAP5: EMIF: Add support for DDR3 device
  OMAP5: DPLL core lock for OMAP5432
  OMAP5: Change voltages for omap5432

 arch/arm/cpu/armv7/omap-common/clocks-common.c |    8 +-
 arch/arm/cpu/armv7/omap-common/emif-common.c   |  118 +++++++++++++++++++++--
 arch/arm/cpu/armv7/omap4/hwinit.c              |    5 +
 arch/arm/cpu/armv7/omap4/sdram_elpida.c        |    1 +
 arch/arm/cpu/armv7/omap5/clocks.c              |   31 ++++--
 arch/arm/cpu/armv7/omap5/hwinit.c              |  123 ++++++++++++++++++++----
 arch/arm/cpu/armv7/omap5/sdram.c               |   50 ++++++++++-
 arch/arm/include/asm/arch-omap4/clocks.h       |    5 +
 arch/arm/include/asm/arch-omap5/clocks.h       |   15 +++
 arch/arm/include/asm/arch-omap5/omap.h         |   18 +++-
 arch/arm/include/asm/emif.h                    |   50 ++++++++++-
 arch/arm/include/asm/omap_common.h             |    1 +
 12 files changed, 382 insertions(+), 43 deletions(-)

-- 
1.7.5.4