[U-Boot] [PATCH] arm,davinci: update for enbw_cmc board

[Heiko Schocher]

Hello Tom,

Tom Rini wrote:
> On Mon, May 14, 2012 at 09:45:58AM -0700, Tom Rini wrote:
>> On Sat, May 05, 2012 at 08:32:50AM +0200, Heiko Schocher wrote:
>>
>>> - change gpio pin settings:
>>>
>>>   - gpio pin 6[13] (PLC reset) default value low
>>>   - gpio pin 6[0] (TPM reset) default value low
>>>   - 4 new GPIO pins
>>>       pin  i/o   name
>>>     - 3[9] input Board Type
>>>     - 2[7] input HW-ID0
>>>     - 2[6] input HW-ID1
>>>     - 2[3] input HW-ID2
>>>
>>> - read board type and hw id from gpio pins on the enbw_cmc board,
>>>   and use board type for setting up different gpio pin settings.
>>>
>>> - do not pass "davinci_mmc.use_dma=0" to linux, as MMC now
>>>   works with DMA.
>>>
>>> - update logbuf support:
>>>   store post word in RTC scratch register
>>>
>>> - add support for configuring KSZ8864RMN switch through
>>>   a config file on u-boot startup. For more infos see:
>>>   doc/README.switch_config
>>>
>>> Signed-off-by: Heiko Schocher <hs at denx.de>
>>> Cc: Wolfgang Denk <wd at denx.de>
>>> Cc: Tom Rini <tom.rini at gmail.com>
>>> Cc: Christian Riesch <christian.riesch at omicron.at>
>>> Cc: Sandeep Paulraj <s-paulraj at ti.com>
>> Applied to u-boot-ti/master, thanks.
> 
> I take that back, sorry.  With ELDK4.1 toolchain:
> Configuring for enbw_cmc board...
> enbw_cmc.c: In function 'enbw_cmc_getvalue':
> enbw_cmc.c:447: warning: dereferencing type-punned pointer will break strict-aliasing rules
>    text    data     bss     dec     hex filename
>  429329    8436  262084  699849   aadc9 eldk42/u-boot

Ups, sorry! Only tested with ELDK-5.0/5.1

send v2 soon

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de