[U-Boot] [PATCH] mx28evk: Fix PSWITCH key position

Fabio Estevam festevam at gmail.com
Sat May 12 20:16:46 CEST 2012


Fix the position for PSWITCH key.

The good benefit of doing this is that boot time is greatly reduced: 
from 5 seconds to less then 1 second.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 doc/README.mx28evk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/doc/README.mx28evk b/doc/README.mx28evk
index c6c3d37..571dfda 100644
--- a/doc/README.mx28evk
+++ b/doc/README.mx28evk
@@ -17,7 +17,7 @@ Jumper configuration
 To boot MX28EVK from an SD card, set the boot mode DIP switches as:
 
    * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
-   * JTAG PSWITCH RESET: To the left (reset enabled)
+   * JTAG PSWITCH RESET: To the right (reset disabled)
    * Battery Source: Down
    * Wall 5V: Up
    * VDD 5V: To the left (off)
-- 
1.7.1



More information about the U-Boot mailing list