[U-Boot] [PATCH V2] USB: S5P: Add ehci support
Rajeshwari Shinde
rajeshwari.s at samsung.com
Wed May 2 15:48:51 CEST 2012
This patch adds ehci driver support for s5p.
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
arch/arm/include/asm/arch-exynos/ehci-s5p.h | 66 ++++++++++++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-s5p.c | 110 +++++++++++++++++++++++++++
3 files changed, 177 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-exynos/ehci-s5p.h
create mode 100644 drivers/usb/host/ehci-s5p.c
diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
new file mode 100644
index 0000000..68feb85
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
@@ -0,0 +1,66 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Vivek Gautam <gautam.vivek at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+
+#define CLK_24MHZ 5
+
+#define HOST_CTRL0_PHYSWRSTALL (1 << 31)
+#define HOST_CTRL0_COMMONON_N (1 << 9)
+#define HOST_CTRL0_SIDDQ (1 << 6)
+#define HOST_CTRL0_FORCESLEEP (1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (1 << 3)
+#define HOST_CTRL0_UTMISWRST (1 << 2)
+#define HOST_CTRL0_LINKSWRST (1 << 1)
+#define HOST_CTRL0_PHYSWRST (1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK (7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN (1 << 29)
+#define EHCICTRL_ENAINCR4 (1 << 28)
+#define EHCICTRL_ENAINCR8 (1 << 27)
+#define EHCICTRL_ENAINCR16 (1 << 26)
+
+/* Register map for PHY control */
+struct s5p_usb_phy {
+ unsigned int usbphyctrl0;
+ unsigned int usbphytune0;
+ unsigned int reserved1[2];
+ unsigned int hsicphyctrl1;
+ unsigned int hsicphytune1;
+ unsigned int reserved2[2];
+ unsigned int hsicphyctrl2;
+ unsigned int hsicphytune2;
+ unsigned int reserved3[2];
+ unsigned int ehcictrl;
+ unsigned int ohcictrl;
+ unsigned int usbotgsys;
+ unsigned int reserved4;
+ unsigned int usbotgtune;
+};
+
+/* Switch on the VBUS power. */
+int board_usb_vbus_init(void);
+
+#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 0d4657e..59c3e57 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
new file mode 100644
index 0000000..4dd4ec1
--- /dev/null
+++ b/drivers/usb/host/ehci-s5p.c
@@ -0,0 +1,110 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Vivek Gautam <gautam.vivek at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ehci-s5p.h>
+#include "ehci.h"
+#include "ehci-core.h"
+
+/* Setup the EHCI host controller. */
+static void setup_usb_phy(struct s5p_usb_phy *usb)
+{
+ clrbits_le32(&usb->usbphyctrl0,
+ HOST_CTRL0_FSEL_MASK |
+ HOST_CTRL0_COMMONON_N |
+ /* HOST Phy setting */
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+
+ setbits_le32(&usb->usbphyctrl0,
+ /* Setting up the ref freq */
+ (CLK_24MHZ << 16) |
+ /* HOST Phy setting */
+ HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ udelay(10);
+ clrbits_le32(&usb->usbphyctrl0,
+ HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ udelay(20);
+
+ /* EHCI Ctrl setting */
+ setbits_le32(&usb->ehcictrl,
+ EHCICTRL_ENAINCRXALIGN |
+ EHCICTRL_ENAINCR4 |
+ EHCICTRL_ENAINCR8 |
+ EHCICTRL_ENAINCR16);
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct s5p_usb_phy *usb)
+{
+ /* HOST_PHY reset */
+ setbits_le32(&usb->usbphyctrl0,
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+}
+
+/*
+ * EHCI-initialization
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+ struct s5p_usb_phy *usb;
+
+ usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+ setup_usb_phy(usb);
+
+ hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
+ hcor = (struct ehci_hcor *)((uint32_t) hccr
+ + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the EHCI host controller.
+ */
+int ehci_hcd_stop()
+{
+ struct s5p_usb_phy *usb;
+
+ usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+ reset_usb_phy(usb);
+
+ return 0;
+}
--
1.7.4.4
More information about the U-Boot
mailing list