[U-Boot] [PATCH v2] kwboot: boot Marvell Kirkwood SoCs over a serial link

[DrEagle]

Hi,

Le 09/05/2012 19:21, Daniel Stodden a écrit :
> On Wed, 2012-05-09 at 08:25 -0500, David Purdy wrote:
>> On Wed, May 9, 2012 at 3:00 AM, Daniel Stodden
>> <daniel.stodden at googlemail.com> wrote:
>>>>
>>>>
>>>> Have you tried to put the bootrom in the debug mode ?
>>>>
>>>> https://doukki.net/doku.php?id=wiki:tutoriels:u-boot.uart#boot_from_uart0
>>>>
>>>> Réfs :
>>>> http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
>>>>
>>>> May be it can helps to understand the 1.11 and 1.21 differences ?
>>>
>>> I never played with it. But according to the documentation, it's rather
>>> orthogonal to image upload. You get a command line interface. However, I
>>> see no command references in the docs.
>>>
>>> Might support entering it in kwboot in the future, but I don't see how
>>> it's would help with the protocol issues.
>>>
>>> Daniel
>>>
>>
>>
>> @ Daniel: Just 2 thoughts...
>>
>> 1.   (less important...) I wonder if it is possible to query the
>> BootROM version via UART...  if possible, on detecting 111 @ offset
>> ff00003c, have it print "Not Supported on V1.11 BootROM"
> 
> Unless s/o can point me at documentation for the debug mode, I'm not
> sure whether that's going to work smoothly. Sounds more prone to future
> breakage, as the device firmware evolves.
> 
> Iff people would really like to see that supported, I'd rather suggest
> to make it some --test command. Not run ahead of the regular boot mode.
> Which then could match against a black/white list of firmware versions
> tested.

I do not know the importance that it may be have. I have done a dump
from one of my sheevaplug bootrom (v1.11) and it's big-endianness.
The GoFlex found [1] is little-endianness.

I can send the binary dump and results disasm if needed.

>> 2.  (more importantly) :   I am actually _just_fine__ w/ the level of
>> function in your current V2.   You've already done a good service to
>> those work on Kirkwood stuff, and would want to press anyone into
>> fixing something that they/we didn't break and possibly can't be
>> fixed.  [There may well be a reason no one has gotten anything w/ the
>> V1.11 BootROM to work with UART-booting.]
>>
>> For me, your V2 already feels "mature".  Its a big step forward from
>> where we were.
> 
> Thanks.
> 
> I'll fix the select() glitch mentioned before and send out v3.
> 
> Daniel
> 
> 
[1]http://wiki.scottn.us/goflex:start


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 554 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120509/2d9ffb7a/attachment.pgp>