[U-Boot] [PATCH 5/6] cmd_nvedit.c: allow board-specific code before/after saving the environment

[McClintock Matthew-B29882]

On Fri, May 18, 2012 at 12:21 PM, Scott Wood <scottwood at freescale.com> wrote:
> On 05/18/2012 12:08 PM, Timur Tabi wrote:
>> Scott Wood wrote:
>>> It was over a year ago that I made that request internally.  And still
>>> the answer is "I need this now now now!".
>>
>> Who's going to do that work, if not you?
>
> Matthew had something working a while ago, I thought.
>
>>> NACK any non-SPD NAND boot for a board that otherwise uses SPD,
>>> particularly if it has socketed RAM.  It's not as if we don't know how
>>> to make this work.
>>
>> Well, *I* don't know how to do that.
>
> Use a three stage boot where the middle stage runs out of L2 SRAM.

Then upstream u-boot reworked SPL so we need to rework using that
implementation.

-M