[U-Boot] [PATCH 5/9] ARM: add tegra support to arm720t

[Stephen Warren]

On 05/18/2012 04:37 PM, Allen Martin wrote:
> On Mon, May 14, 2012 at 10:03:24PM -0700, Stephen Warren wrote:
>> On 05/10/2012 01:02 AM, Allen Martin wrote:
>>> Add support for tegra arm7 boot processor.  This processor is used to
>>> power on the Cortex A9 and transfer control to it.
>>
>>> +static void enable_cpu_power_rail(void)
>>
>>> +	/*
>>> +	 * The TI PMU65861C needs a 3.75ms delay between enabling
>>> +	 * the power rail and enabling the CPU clock.  This delay
>>> +	 * between SM1EN and SM1 is for switching time + the ramp
>>> +	 * up of the voltage to the CPU (VDD_CPU from PMU).
>>> +	 */
>>> +	udelay(3750);
>>
>> Not all boards use that PMU. Can this be conditional on a define that
>> enables that PMU, or part of the PMU diver or something?
> 
> Sounds reasonable, although I think it should be part of a separate
> patch.  This code I just moved unmodified from ap20.c in the armv7
> tegra2 directory.
>
>>> diff --git a/arch/arm/cpu/arm720t/tegra2/cpu.h b/arch/arm/cpu/arm720t/tegra2/cpu.h
>>
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>
>> Is this new code you just wrote? If so, shouldn't it be GPL v2 not GPL v2+?
> 
> Again I just moved it unmodified (copyright and all) from ap20.h.  

Oh right. I think if you pass "-M" or better "-C" to "git format-patch",
it'll highlight that fact better; it should make the patch file indicate
that the relevant files were moved or copied, and just show the diffs to
the file during the move/copy (which may be zero or tiny), rather than
showing the entire file as new code.