[U-Boot] pull request for u-boot-tegra/master

[Tom Warren]

Albert,

Please pull u-boot-tegra/master into ARM master. Thanks!

The following changes since commit 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:
  SRICHARAN R (1):
        OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer

are available in the git repository at:

  git://git.denx.de/u-boot-tegra master

Lucas Stach (2):
      tegra: sync SDIO1 pingroup enum name with TRM
      tegra: add SDIO1 funcmux entry for UARTA

Simon Glass (1):
      tegra: Correct PLL access in ap20.c and clock.c

Stephen Warren (22):
      tegra: paz00: fix typo in SD slot CD detect GPIO
      tegra: add alternate UART1 funcmux entry
      tegra: Whistler board support
      tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS
      tegra: flesh out bootcmd
      tegra: whistler: reduce and comment network cfg options
      tegra: seaboard: add support for USB networking
      tegra: add UART1 on GPU funcmux entry
      tegra: add SDMMC1 on SDIO1 funcmux entry
      tegra: Compulab TrimSlice board support
      tegra: harmony: add device tree support
      tegra: paz00: add device tree support
      tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it
      tegra: ventana: add own device tree, enable USB
      env_mmc: align buffers using ALLOC_CACHE_ALIGN_BUFFER
      sf: winbond: Add support for the Winbond W25Q80BL
      tegra: ventana: store environment in eMMC
      tegra: whistler: store environment in eMMC
      tegra: trimslice: store environment in SPI flash
      tegra: paz00: store environment in eMMC
      tegra: seaboard: disable SPI, move environment to eMMC
      tegra: trimslice: fix a couple typos

Tom Warren (6):
      spi: Tegra2: Seaboard: fix UART corruption during SPI transactions
      spi: Tegra2: Seaboard: enable SPI/UART corruption fix
      spi: tegra2: rename tegra2_spi.* to tegra_spi.*
      mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*
      gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
      arm: Tegra: Use ODMDATA from BCT in IRAM

amartin at nvidia.com (1):
      tegra: override compiler flags for low level init code

 MAINTAINERS                                        |    2 +
 arch/arm/cpu/armv7/tegra2/ap20.c                   |   28 ++++-
 arch/arm/cpu/armv7/tegra2/board.c                  |   18 +++-
 arch/arm/cpu/armv7/tegra2/clock.c                  |    4 +-
 arch/arm/cpu/armv7/tegra2/config.mk                |    7 +-
 arch/arm/cpu/armv7/tegra2/funcmux.c                |   30 +++++-
 arch/arm/include/asm/arch-tegra2/clock.h           |    5 +-
 arch/arm/include/asm/arch-tegra2/funcmux.h         |    4 +
 arch/arm/include/asm/arch-tegra2/gpio.h            |    7 +-
 arch/arm/include/asm/arch-tegra2/pinmux.h          |    2 +-
 arch/arm/include/asm/arch-tegra2/tegra2.h          |    4 +
 .../asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h}  |    9 +-
 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h |    4 +-
 board/compal/dts/tegra2-paz00.dts                  |   57 ++++++++++
 board/compal/paz00/paz00.c                         |   12 +-
 board/compulab/dts/tegra2-trimslice.dts            |   57 ++++++++++
 board/compulab/trimslice/Makefile                  |   49 ++++++++
 board/compulab/trimslice/trimslice.c               |   73 ++++++++++++
 board/nvidia/common/uart-spi-switch.c              |   29 ++----
 board/nvidia/dts/tegra2-harmony.dts                |   57 ++++++++++
 board/nvidia/dts/tegra2-ventana.dts                |   57 ++++++++++
 board/nvidia/dts/tegra2-whistler.dts               |   67 +++++++++++
 board/nvidia/harmony/harmony.c                     |    4 +-
 board/nvidia/seaboard/seaboard.c                   |    4 +-
 board/nvidia/whistler/Makefile                     |   48 ++++++++
 board/nvidia/whistler/whistler.c                   |  116 +++++++++++++++++++
 boards.cfg                                         |    2 +
 common/env_mmc.c                                   |   10 +-
 drivers/gpio/Makefile                              |    2 +-
 drivers/gpio/{tegra2_gpio.c => tegra_gpio.c}       |    2 +-
 drivers/mmc/Makefile                               |    2 +-
 drivers/mmc/{tegra2_mmc.c => tegra_mmc.c}          |    4 +-
 drivers/mmc/{tegra2_mmc.h => tegra_mmc.h}          |    8 +-
 drivers/mtd/spi/winbond.c                          |    8 ++
 drivers/spi/Makefile                               |    2 +-
 drivers/spi/{tegra2_spi.c => tegra_spi.c}          |   17 +++-
 include/configs/harmony.h                          |   29 ++++-
 include/configs/medcom.h                           |    6 +-
 include/configs/paz00.h                            |   34 +++++-
 include/configs/plutux.h                           |    6 +-
 include/configs/seaboard.h                         |   35 +++---
 include/configs/tegra2-common-post.h               |  117 ++++++++++++++++++++
 include/configs/tegra2-common.h                    |   10 +--
 include/configs/trimslice.h                        |   99 +++++++++++++++++
 include/configs/ventana.h                          |   29 ++++-
 include/configs/whistler.h                         |   94 ++++++++++++++++
 46 files changed, 1150 insertions(+), 120 deletions(-)
 rename arch/arm/include/asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} (95%)
 create mode 100644 board/compal/dts/tegra2-paz00.dts
 create mode 100644 board/compulab/dts/tegra2-trimslice.dts
 create mode 100644 board/compulab/trimslice/Makefile
 create mode 100644 board/compulab/trimslice/trimslice.c
 create mode 100644 board/nvidia/dts/tegra2-harmony.dts
 create mode 100644 board/nvidia/dts/tegra2-ventana.dts
 create mode 100644 board/nvidia/dts/tegra2-whistler.dts
 create mode 100644 board/nvidia/whistler/Makefile
 create mode 100644 board/nvidia/whistler/whistler.c
 rename drivers/gpio/{tegra2_gpio.c => tegra_gpio.c} (99%)
 rename drivers/mmc/{tegra2_mmc.c => tegra_mmc.c} (99%)
 rename drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} (97%)
 rename drivers/spi/{tegra2_spi.c => tegra_spi.c} (95%)
 create mode 100644 include/configs/tegra2-common-post.h
 create mode 100644 include/configs/trimslice.h
 create mode 100644 include/configs/whistler.h