[U-Boot] LCD Support on mx51 vision2

[Fabio Estevam]

Hi Anatolij,

On 5/8/12, Anatolij Gustschin <agust at denx.de> wrote:

> the issue is probably the insufficient malloc area size defined in
> the board config file. The mx51evk defines CONFIG_SYS_MALLOC_LEN
> to be slightly more than 2 MiB. The vision2 config sets
> CONFIG_SYS_MALLOC_LEN to 10 MiB. Please try increasing
> CONFIG_SYS_MALLOC_LEN.

Thanks for your suggestion. Increasing  CONFIG_SYS_MALLOC_LEN does not
fix the issue.

I will debug this problem.

Thanks,

Fabio Estevam