[U-Boot] [PATCH 07/13] i.MX28: Shut down the LCD controller before reset

[Marek Vasut]

If the LCD controller is on before the CPU goes into reset, the traffic on LCDIF
data pins interferes with the BootROM's boot mode sampling. So shut the
controller down.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Detlev Zundel <dzu at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
---
 arch/arm/cpu/arm926ejs/mx28/mx28.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 865dbb3..a82ff25 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -51,9 +51,16 @@ void reset_cpu(ulong ignored) __attribute__((noreturn));
 
 void reset_cpu(ulong ignored)
 {
-
 	struct mx28_rtc_regs *rtc_regs =
 		(struct mx28_rtc_regs *)MXS_RTC_BASE;
+	struct mx28_lcdif_regs *lcdif_regs =
+		(struct mx28_lcdif_regs *)MXS_LCDIF_BASE;
+
+	/*
+	 * Shut down the LCD controller as it interferes with BootROM boot mode
+	 * pads sampling.
+	 */
+	writel(LCDIF_CTRL_RUN, &lcdif_regs->hw_lcdif_ctrl_clr);
 
 	/* Wait 1 uS before doing the actual watchdog reset */
 	writel(1, &rtc_regs->hw_rtc_watchdog);
-- 
1.7.10