[U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

TrimSlice's USB1 port has two purposes; it either acts as a device port
hosting Tegra's USB recovery protocol, or acts as a host port connected
to the internal USB->SATA bridge chip, which may in turn be connected to
an SSD or HDD. Add the appropriate device tree and board configuration
options to enable this port as a host port, and route the port to the
SATA bridge using the VBUS GPIO.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 board/compulab/dts/tegra20-trimslice.dts |    3 ++-
 board/compulab/trimslice/trimslice.c     |    8 ++++++++
 include/configs/trimslice.h              |    1 +
 3 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts
index db79e77..4450674 100644
--- a/board/compulab/dts/tegra20-trimslice.dts
+++ b/board/compulab/dts/tegra20-trimslice.dts
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb at c5008000";
+		usb1 = "/usb at c5000000";
 	};
 
 	memory {
@@ -48,7 +49,7 @@
 	};
 
 	usb at c5000000 {
-		status = "disabled";
+		nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */
 	};
 
 	usb at c5004000 {
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
index 9ef66fd..8f4dd09 100644
--- a/board/compulab/trimslice/trimslice.c
+++ b/board/compulab/trimslice/trimslice.c
@@ -34,6 +34,14 @@
 #include <mmc.h>
 #endif
 
+void pin_mux_usb(void)
+{
+	/*
+	 * USB1 internal/external mux GPIO, which masquerades as a VBUS GPIO
+	 * in the current device tree.
+	 */
+	pinmux_tristate_disable(PINGRP_UAC);
+}
 
 void pin_mux_spi(void)
 {
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index eeb0dbe..165bc73 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -80,6 +80,7 @@
 #define CONFIG_ENV_OFFSET		(512 * 1024)
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
 #define CONFIG_USB_STORAGE
-- 
1.7.0.4