[U-Boot] SMSC LAN9514 on TI DM37x board
Ilya Yanok
ilya.yanok at cogentembedded.com
Tue Nov 6 12:01:30 CET 2012
On Tue, Nov 6, 2012 at 9:24 AM, Felix Radensky <felix at embedded-sol.com>wrote:
> Hi Marek,
>
>
> On 11/06/2012 12:57 AM, Marek Vasut wrote:
>
>> Can you please avoid top-posting? Does U-Boot even support your USB
>> device?
>>
>>
> Sorry about top-posting. My USB device is supported by smsc95xx.c driver
> in drivers/usb/eth.
Judging by the portion of config you cited you don't have it enabled. But I
don't think that's your current problem (you should see your device after
usb start even if there is no driver for it). I'd verify PHY configuration
if I were you.
Regards, Ilya.
More information about the U-Boot
mailing list