[U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Stefano Babic
sbabic at denx.de
Sat Nov 10 08:28:18 CET 2012
On 23/10/2012 04:40, Troy Kisky wrote:
> This series tries to separate the mii regsisters
> from the ethernet registers as suggested by
> Andy Fleming. Then, mx6qsabrelite is changed
> to find the phy address from the possibles 4-7.
>
> The V3 series is very different from V2.
>
> Troy Kisky (9):
> doc/README.fec_mxc: add documentation
> net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
> net: fec_mxc: change fec_mii_setspeed parameter
> net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
> phy: add phy_find_by_mask/phy_connect_dev
> net: fec_mxc: use fec_set_dev_name to set name
> net: fec_mxc: only call phy_connect in fec_probe
> net: fec_mxc: get phydev before fec_probe
> mx6qsabrelite: search mii phy address 4-7
>
Hi Joe,
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +++-
> doc/README.fec_mxc | 27 ++++
> drivers/net/fec_mxc.c | 164 ++++++++++++++-----------
> drivers/net/fec_mxc.h | 2 +-
> drivers/net/phy/phy.c | 128 +++++++++++--------
> include/configs/m28evk.h | 1 -
> include/configs/mx28evk.h | 1 -
> include/configs/sc_sps_1.h | 1 -
> include/netdev.h | 7 ++
> include/phy.h | 3 +
> 10 files changed, 227 insertions(+), 131 deletions(-)
> create mode 100644 doc/README.fec_mxc
Patches are assigned to me in patchworks. Do you have any issue with
this patchset ? If it is ok for you, I will apply it to u-boot-imx.
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list