[U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue

[Marek Vasut]

Dear Andreas Puls,

> Hello Rommel and Vasily,
> 
> i got it solved :) Thanks you both for the tips.
> I saw that the latest u-boot.bin is about 120kb bigger then the "old -
> working" u-boot.bin
> 
> Copied the uImage to next "higher sector" and its working fine.
> 
> The Toradex wiki said copy uImage to 0xC0000

This is valid for the ancient Toradex u-boot ...

> I copied the uImage now to 0x100000 which is the next sector which
> showed up by flinfo

Yes, because the upstream u-boot uses redundant environment (aka. sector 0x80000 
and 0xc0000 are both env sectors)

> Changed the bootcmd to load the 0x100000 value.
> Booting works.
> Saveenv works.
> 
> All happy (only a small issue about the bogomips - will make a new post)
> 
> 
> 
> Kind regards and many thanks
>   Andreas

Best regards,
Marek Vasut