[U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35
Stefano Babic
sbabic at denx.de
Fri Nov 16 14:12:48 CET 2012
On 16/11/2012 12:42, Benoît Thébaudeau wrote:
> The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
> selection bit.
>
> This issue has been reported by Michael Burkey <mdburkey at gmail.com> and fixed by
> Christoph Fritz <chf.fritz at googlemail.com> on Linux, from which these #define-s
> had been copied.
>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Marek Vasut <marex at denx.de>
Hi Benoit,
> ---
> .../drivers/usb/host/ehci-mxc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c
> index 7c5f71c..f2642a0 100644
> --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c
> +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c
> @@ -67,7 +67,7 @@
> #define MX35_H1_SIC_SHIFT 21
> #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
> #define MX35_H1_PP_BIT (1 << 18)
> -#define MX35_H1_PM_BIT (1 << 8)
> +#define MX35_H1_PM_BIT (1 << 16)
> #define MX35_H1_IPPUE_UP_BIT (1 << 7)
> #define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
> #define MX35_H1_TLL_BIT (1 << 5)
Hey, the patch was sent today to linux-arm ! Very nice you noted and
route the bug to u-boot.
Acked-by: Stefano Babic <sbabic at denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list