[U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35

[Benoît Thébaudeau]

The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Michael Burkey <mdburkey at gmail.com> and fixed by
Christoph Fritz <chf.fritz at googlemail.com> on Linux, from which these #define-s
had been copied.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Marek Vasut <marex at denx.de>
---
 .../drivers/usb/host/ehci-mxc.c                                      |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c
index 7c5f71c..f2642a0 100644
--- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c
+++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c
@@ -67,7 +67,7 @@
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
 #define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_PM_BIT		(1 << 16)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)