[U-Boot] [PATCH v4 1/2] usb: ulpi: add indicator configuration function
Lucas Stach
dev at lynxeye.de
Mon Oct 1 00:44:34 CEST 2012
Allows for easy configuration of the VBUS indicator related ULPI
config bits.
Also move the external indicator setup from ulpi_set_vbus() to
the new function.
Signed-off-by: Lucas Stach <dev at lynxeye.de>
Acked-by: Igor Grinberg <grinberg at compulab.co.il>
---
v4:
- do r-m-w access on iface_ctrl register
- align with coding style of other ulpi functions
---
drivers/usb/ulpi/ulpi.c | 32 ++++++++++++++++++++++++++++----
include/usb/ulpi.h | 13 +++++++++++--
2 Dateien geändert, 39 Zeilen hinzugefügt(+), 6 Zeilen entfernt(-)
diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
index dde2585..23b59e7 100644
--- a/drivers/usb/ulpi/ulpi.c
+++ b/drivers/usb/ulpi/ulpi.c
@@ -106,20 +106,44 @@ int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed)
return ulpi_write(ulpi_vp, &ulpi->function_ctrl, val);
}
-int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power,
- int ext_ind)
+int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power)
{
u32 flags = ULPI_OTG_DRVVBUS;
u8 *reg = on ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear;
if (ext_power)
flags |= ULPI_OTG_DRVVBUS_EXT;
- if (ext_ind)
- flags |= ULPI_OTG_EXTVBUSIND;
return ulpi_write(ulpi_vp, reg, flags);
}
+int ulpi_set_vbus_indicator(struct ulpi_viewport *ulpi_vp, int external,
+ int passthu, int complement)
+{
+ u32 flags, val;
+ u8 *reg;
+
+ reg = external ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear;
+ val = ulpi_write(ulpi_vp, reg, ULPI_OTG_EXTVBUSIND);
+ if (val)
+ return val;
+
+ flags = passthu ? ULPI_IFACE_PASSTHRU : 0;
+ flags |= complement ? ULPI_IFACE_EXTVBUS_COMPLEMENT : 0;
+
+ val = ulpi_read(ulpi_vp, &ulpi->iface_ctrl);
+ if (val == ULPI_ERROR)
+ return val;
+
+ val = val & ~(ULPI_IFACE_PASSTHRU & ULPI_IFACE_EXTVBUS_COMPLEMENT);
+ val |= flags;
+ val = ulpi_write(ulpi_vp, &ulpi->iface_ctrl, val);
+ if (val)
+ return val;
+
+ return 0;
+}
+
int ulpi_set_pd(struct ulpi_viewport *ulpi_vp, int enable)
{
u32 val = ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN;
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
index 9a75c24..99166c4 100644
--- a/include/usb/ulpi.h
+++ b/include/usb/ulpi.h
@@ -61,8 +61,17 @@ int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp,
- int on, int ext_power, int ext_ind);
+int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power);
+
+/*
+ * Configure VBUS indicator
+ * @external - external VBUS over-current indicator is used
+ * @passthru - disables ANDing of internal VBUS comparator
+ * with external VBUS input
+ * @complement - inverts the external VBUS input
+ */
+int ulpi_set_vbus_indicator(struct ulpi_viewport *ulpi_vp, int external,
+ int passthru, int complement);
/*
* Enable/disable pull-down resistors on D+ and D- USB lines.
--
1.7.11.4
More information about the U-Boot
mailing list