October 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Oct 1 00:30:06 CEST 2012
Ending: Wed Oct 31 23:51:35 CET 2012
Messages: 2969

• [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Albert ARIBAUD (U-Boot)
• [U-Boot] Access IO register with writel/readl?   Dennis Lan (dlan)
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [U-Boot] [STATUS] [ARM] u-boot-arm/master rebased on current u-boot/master   Albert ARIBAUD
• [U-Boot] v2012.10-rc2 is now released   Albert ARIBAUD
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] msm7x30: Add support for msm7630_surf board   Albert ARIBAUD
• [U-Boot] [PATCH 2/2 v10] ARM : Add support for MINI2440 (s3c2440).   Albert ARIBAUD
• [U-Boot] [PATCH 1/2 v5] ARM : Add GPIO Driver and IOMUX definition for S3C2440   Albert ARIBAUD
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Albert ARIBAUD
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Albert ARIBAUD
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/next into ARM next   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa/next   Albert ARIBAUD
• [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] ARM: increase lmb stack space reservation to 4KB   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/2] arm: work around assembler bug   Albert ARIBAUD
• [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized   Albert ARIBAUD
• [U-Boot] [PATCH] armv7 cpu_init_crit: Simplify code   Albert ARIBAUD
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Albert ARIBAUD
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Albert ARIBAUD
• [U-Boot] mtest: Print dcache state   Albert ARIBAUD
• [U-Boot] [ARM] [NOTICE] Branch u-boot-arm/master to be force-pushed   Albert ARIBAUD
• [U-Boot] [ARM] [NOTICE] Branch u-boot-arm/master to be force-pushed   Albert ARIBAUD
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Albert ARIBAUD
• [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Add CONFIG_OF_BOARD_SETUP support to bootm   Albert ARIBAUD
• [U-Boot] [PATCHv7] ARM: Add Altera SOCFPGA Cyclone5   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Albert ARIBAUD
• [U-Boot] [PATCHv8] ARM: Add Altera SOCFPGA Cyclone5   Albert ARIBAUD
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Albert ARIBAUD
• [U-Boot] [PATCH] Improve license declaration for cmd_ini.h   Albert ARIBAUD
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm1136: Fix enable_caches()   Albert ARIBAUD
• [U-Boot] [PATCH] arm: armv7: temporarily set -mno-unaligned-access   Albert ARIBAUD
• [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Albert ARIBAUD
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430 (was: [PATCH] yaffs2: Fix GCC 4.6 compile warnings)   Albert ARIBAUD
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430 (was: [PATCH] yaffs2: Fix GCC 4.6 compile warnings)   Albert ARIBAUD
• [U-Boot] [PATCH v3 12/23] tegra: Add EMC support for optimal memory timings   Albert ARIBAUD
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Albert ARIBAUD
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Albert ARIBAUD
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH] arm: armv7: omap3: Fix restore sequence in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH V2] arm: armv7: omap3: Fix restore sequence in lowlevel_init   Albert ARIBAUD
• [U-Boot] [PATCH] Remove lh7a40x cpu and serial driver   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH V3] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH V4] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/next into u-boot/next   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx/next   Albert ARIBAUD
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430   Albert ARIBAUD
• [U-Boot] [PATCH] arm: trats: Power down core 1   Albert ARIBAUD
• [U-Boot] [PATCH V4] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH V5] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: prevent misaligned array inits -- PLEASE DISREGARD.   Albert ARIBAUD
• [U-Boot] [PATCH V6] [RESEND] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] U-Boot git usage model (was: Re: [PULL] u-boot-usb/next)   Albert ARIBAUD
• [U-Boot] h2200 fails to build on current u-boot/next (was: Pull request: u-boot-arm/next into u-boot/next)   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] [PATCH] h2200: Make use of default_serial_console   Albert ARIBAUD
• [U-Boot] [PATCH] h2200: Make use of default_serial_console   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Albert ARIBAUD
• [U-Boot] [ARM] [STATUS] ATTENTION: Uu-boot-arm/master branch ROLLBACK to 28e5ac2d   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Albert ARIBAUD
• [U-Boot] [ARM] [STATUS] ATTENTION: Uu-boot-arm/master branch ROLLBACK to 28e5ac2d   Albert ARIBAUD
• [U-Boot] U-Boot git usage model   Albert ARIBAUD
• [U-Boot] [PATCH] FEC: Rework RX buffer init   Albert ARIBAUD
• [U-Boot] [PATCH] Remove lh7a40x cpu and serial driver   Albert ARIBAUD
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Albert ARIBAUD
• [U-Boot] File placement in Soc / board dirs and make issues (was: [PATCH V3 17/32] imximage.cfg: run files through C preprocessor)   Albert ARIBAUD
• [U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de   Albert ARIBAUD
• [U-Boot] [PATCH v5 09/16] arm: Add control over cachability of memory regions   Albert ARIBAUD
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Albert ARIBAUD
• [U-Boot] File placement in Soc / board dirs and make issues   Albert ARIBAUD
• [U-Boot] [PATCH V6] [RESEND] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH v2 5/6] ARM: Add SPL target to arm1136   Albert ARIBAUD
• [U-Boot] Problem with first use of patman   Albert ARIBAUD
• [U-Boot] Problem with first use of patman   Albert ARIBAUD
• [U-Boot] Problem with first use of patman   Albert ARIBAUD
• [U-Boot] Problem with first use of patman [FIXED]   Albert ARIBAUD
• [U-Boot] [PATCH] patman: force git log commands to not use color   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Albert ARIBAUD
• [U-Boot] [PATCH V6] [RESEND] ARM: prevent misaligned array inits   Albert ARIBAUD
• [U-Boot] [PATCH v2] ARCH: EXYNOS: add support to match product id   Albert ARIBAUD
• [U-Boot] [PATCH v2] patman: force git log commands to not use color   Albert ARIBAUD
• [U-Boot] [PATCH] patman: force git log commands to not use color   Albert ARIBAUD
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Albert ARIBAUD
• [U-Boot] [PATCH] arm: arm925t: remove SX1 board   Albert ARIBAUD
• [U-Boot] [PATCH] arm: arm925t: remove SX1 board   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa/master   Albert ARIBAUD
• [U-Boot] [PATCH 04/10] dm: wdt: arm: Move tnetv107x into drivers/watchdog/   Albert ARIBAUD
• [U-Boot] [PATCH 1/1] versatile: board configs: Use buffered writes on flash   Albert ARIBAUD
• [U-Boot] [u-boot] Adding missing CONFIG_SYS_CACHELINE_SIZE to boards definitions   Albert ARIBAUD
• [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values   Albert ARIBAUD
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Albert ARIBAUD
• [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation   Albert ARIBAUD
• [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM   Albert ARIBAUD
• [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch   Albert ARIBAUD
• [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: arm925t: remove SX1 board   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add mailbox driver   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Albert ARIBAUD
• [U-Boot] [PATCH] actux[123]: Update linker script for ELDK 4.2   Albert ARIBAUD
• [U-Boot] Debugging (was: ARM : Removing unwind dummy functions)   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add mailbox driver   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] MSM7x27a: Add support for qualcomm msm7x27a SOC.   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] MSM7x27a: Add support for qualcomm msm7x27a SOC.   Albert ARIBAUD
• [U-Boot] Add support for eco5-pk ARM board   Albert ARIBAUD
• [U-Boot] [PATCH] arm: fdt: Relocate fdt along with other data   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] mvgbe: allow non-sequential PHY addresses   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/2] mvgbe: allow non-sequential PHY addresses   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/2] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Albert ARIBAUD
• [U-Boot] File placement in Soc / board dirs and make issues   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PULL] please pull u-boot-atmel/master   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/6] arm: Remove support for lpc2292   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/6] arm: Remove support for lpc2292   Albert ARIBAUD
• [U-Boot] [PATCH 0/5] Support for qualcomm msm7630 board   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: arm925t: remove SX1 board   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Albert ARIBAUD
• [U-Boot] [PATCH] Origen: Add default clock settings for multimedia IPs   Albert ARIBAUD
• [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART   Albert ARIBAUD
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Albert ARIBAUD
• [U-Boot] [PATCH V3 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk   Albert ARIBAUD
• [U-Boot] [PATCH V3 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] [PATCH V3 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Sinan Akman
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Sinan Akman
• [U-Boot] [PATCH 0/6 V5] EXYNOS5: Enable SPI support   Hatim Ali
• [U-Boot] [PATCH 1/6 V5] EXYNOS5: Add pinmux support for SPI   Hatim Ali
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Hatim Ali
• [U-Boot] [PATCH 3/6 V5] EXYNOS5: Add base address for SPI.   Hatim Ali
• [U-Boot] [PATCH 4/6 V5] SPI: Add SPI Driver for EXYNOS.   Hatim Ali
• [U-Boot] [PATCH 5/6 V5] EXYNOS5: Enable SPI   Hatim Ali
• [U-Boot] [PATCH 6/6 V5] EXYNOS5: Enable SPI booting.   Hatim Ali
• [U-Boot] [PATCH 0/6 V6] EXYNOS5: Enable SPI support   Hatim Ali
• [U-Boot] [PATCH 1/6 V6] EXYNOS5: Add pinmux support for SPI   Hatim Ali
• [U-Boot] [PATCH 2/6 V6] EXYNOS: Add clock for SPI.   Hatim Ali
• [U-Boot] [PATCH 3/6 V6] EXYNOS5: Add base address for SPI.   Hatim Ali
• [U-Boot] [PATCH 4/6 V6] SPI: Add SPI Driver for EXYNOS.   Hatim Ali
• [U-Boot] [PATCH 5/6 V6] EXYNOS5: Enable SPI   Hatim Ali
• [U-Boot] [PATCH 6/6 V6] EXYNOS5: Enable SPI booting.   Hatim Ali
• [U-Boot] [PATCH 0/6 V7] EXYNOS5: Enable SPI support   Hatim Ali
• [U-Boot] [PATCH 1/6 V7] EXYNOS5: Add pinmux support for SPI   Hatim Ali
• [U-Boot] [PATCH 2/6 V7] EXYNOS: Add clock for SPI.   Hatim Ali
• [U-Boot] [PATCH 3/6 V7] EXYNOS5: Add base address for SPI.   Hatim Ali
• [U-Boot] [PATCH 4/6 V7] SPI: Add SPI Driver for EXYNOS.   Hatim Ali
• [U-Boot] [PATCH 5/6 V7] EXYNOS5: Enable SPI   Hatim Ali
• [U-Boot] [PATCH 6/6 V7] EXYNOS5: Enable SPI booting.   Hatim Ali
• [U-Boot] [PATCH 0/6 V8] EXYNOS5: Enable SPI support   Hatim Ali
• [U-Boot] [PATCH 1/6 V8] EXYNOS5: Add pinmux support for SPI   Hatim Ali
• [U-Boot] [PATCH 2/6 V8] EXYNOS: Add clock for SPI   Hatim Ali
• [U-Boot] [PATCH 3/6 V8] EXYNOS5: Add base address for SPI.   Hatim Ali
• [U-Boot] [PATCH 4/6 V8] SPI: Add SPI Driver for EXYNOS.   Hatim Ali
• [U-Boot] [PATCH 5/6 V8] EXYNOS5: Enable SPI   Hatim Ali
• [U-Boot] [PATCH 6/6 V8] EXYNOS5: Enable SPI booting.   Hatim Ali
• [U-Boot] Please pull u-boot-mpc85xx.git   Fleming Andy-AFLEMING
• [U-Boot] [PATCH 0/2] eco5pk: Add support for the eco5pk ARM board   Raphael Assenat
• [U-Boot] [PATCH 1/2] eco5pk: Add new board and default config   Raphael Assenat
• [U-Boot] [PATCH 2/2] eco5pk: Add board config and MAINTAINERS entry   Raphael Assenat
• [U-Boot] Add support for eco5-pk ARM board   Raphaël Assénat
• [U-Boot] Add support for eco5-pk ARM board   Raphaël Assénat
• [U-Boot] Go command is not working   VISWANADHULA BALAJI
• [U-Boot] go command is not working for smdkv310 board   VISWANADHULA BALAJI
• [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids   Stefano Babic
• [U-Boot] [PATCH] mx6qsabreauto: Add Ethernet support   Stefano Babic
• [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init   Stefano Babic
• [U-Boot] [PATCH 0/3] i.MX6: implement hdmidet command   Stefano Babic
• [U-Boot] [PATCH v2] configs: mx6qsabre_common.h: Use default clock definitions   Stefano Babic
• [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init   Stefano Babic
• [U-Boot] [PATCH] mx6qsabreauto: Add Ethernet support   Stefano Babic
• [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support   Stefano Babic
• [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support   Stefano Babic
• [U-Boot] env default -f -a crash with 2012.10-rc2   Stefano Babic
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Stefano Babic
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Stefano Babic
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Stefano Babic
• [U-Boot] [PATCH] env: fix crash using default -f -a   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx/next   Stefano Babic
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Stefano Babic
• [U-Boot] [PATCH 3/3] nitrogen6x: initialize WL12XX pads, use to determine board type   Stefano Babic
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Stefano Babic
• [U-Boot] [PATCH V3 25/32] imx-common: cpu: add imx_ddr_size   Stefano Babic
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Stefano Babic
• [U-Boot] [PATCH V3 02/32] imximage: remove redundant setting of app_dest_ptr   Stefano Babic
• [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location   Stefano Babic
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Stefano Babic
• [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q   Stefano Babic
• [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite   Stefano Babic
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Stefano Babic
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Stefano Babic
• [U-Boot] [PATCH v2 02/21] pmic:i2c: Add I2C byte order to PMIC framework   Stefano Babic
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Stefano Babic
• [U-Boot] [PATCH v2 06/21] pmic: Enable power_board_init() support at TRATS   Stefano Babic
• [U-Boot] [PATCH v2 08/21] pmic: Move pmic related code to ./drivers/power directory   Stefano Babic
• [U-Boot] [PATCH v2] mxc: Fix SDHC multi-instance clock   Stefano Babic
• [U-Boot] [PATCH v2 02/21] pmic:i2c: Add I2C byte order to PMIC framework   Stefano Babic
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Stefano Babic
• [U-Boot] [PATCH v2 06/21] pmic: Enable power_board_init() support at TRATS   Stefano Babic
• [U-Boot] [PATCH v2 3/3] mx35: Clean up lowlevel_init   Stefano Babic
• [U-Boot] [PATCH v2] mx35: Fix eSDHC clocks   Stefano Babic
• [U-Boot] [PATCH v2] mxc: Fix SDHC multi-instance clock   Stefano Babic
• [U-Boot] [PATCH V2] i.MX: iomux: input pad array can be const   Stefano Babic
• [U-Boot] [PATCH] mx25: Clean up imx-regs.h   Stefano Babic
• [U-Boot] [PATCH] mx25: Clean up imx-regs.h   Stefano Babic
• [U-Boot] [PATCH] mx6qsabreauto: Change mmcroot so it works out of box   Stefano Babic
• [U-Boot] [PATCH] mx6qsabreauto: Pass the board revision to the kernel   Stefano Babic
• [U-Boot] [PATCH 2/2] i.MX: declare iomux_v3_cfg_t arrays as const   Stefano Babic
• [U-Boot] [PATCH 1/2] i.MX video: struct fb_videomode can be const   Stefano Babic
• [U-Boot] [PATCH 2/2] i.MX: ipufb: add const to fb_videomode declarations   Stefano Babic
• [U-Boot] [PATCH 1/3] i.MX6: set drive strength for parallel RGB pads   Stefano Babic
• [U-Boot] [PATCH 2/3] i.MX6: add HDMI transmitter register declarations from kernel WIP.   Stefano Babic
• [U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: Add splash screen support   Stefano Babic
• [U-Boot] [PATCH v2 0/6] Added SPL for MX35 boards   Stefano Babic
• [U-Boot] [PATCH v2 1/6] ARM: Fix start.S when used with SPL in arm1136   Stefano Babic
• [U-Boot] [PATCH v2 2/6] MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK   Stefano Babic
• [U-Boot] [PATCH v2 3/6] MX35: Add soc_boot_mode and soc_boot_device to MX35   Stefano Babic
• [U-Boot] [PATCH v2 4/6] SPL: Added SPL target for mx35 SOC to SPL Makefile   Stefano Babic
• [U-Boot] [PATCH v2 5/6] ARM: Add SPL target to arm1136   Stefano Babic
• [U-Boot] [PATCH v2 6/6] MX35: add support for woodburn board   Stefano Babic
• [U-Boot] [PATCH 2/3] mx25pdk: Add esdhc support   Stefano Babic
• [U-Boot] [PATCH 3/3] mx25pdk: Add FEC support   Stefano Babic
• [U-Boot] [PATCH v2 09/21] pmic: Extend struct pmic to support battery and charger related operations   Stefano Babic
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Stefano Babic
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Stefano Babic
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Stefano Babic
• [U-Boot] [PATCH v2 5/6] ARM: Add SPL target to arm1136   Stefano Babic
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Stefano Babic
• [U-Boot] i.MX : rebasing due to mistake   Stefano Babic
• [U-Boot] [PATCH v1 3/4] VIDEO: add macro to set LCD size for DSS driver   Stefano Babic
• [U-Boot] [PATCH v1] OMAP3: mt_ventoux: power on USB at startup   Stefano Babic
• [U-Boot] [PATCH v1 1/4] OMAP3: updated pinmux and environment for new revision of mcx board   Stefano Babic
• [U-Boot] [PATCH v1 2/4] OMAP3: mcx: updated to new hardware revision   Stefano Babic
• [U-Boot] [PATCH v1 3/4] VIDEO: add macro to set LCD size for DSS driver   Stefano Babic
• [U-Boot] [PATCH v1 4/4] OMAP3: add video support to the mcx board   Stefano Babic
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Stefano Babic
• [U-Boot] [PATCH v3 5/6] ARM: Add SPL target to arm1136   Stefano Babic
• [U-Boot] [PATCH 2/3] mx5: lowlevel_init.S: Fix PLL settings for mx53   Stefano Babic
• [U-Boot] [PATCH 3/3] mx53loco: Adapt the IPU clock   Stefano Babic
• [U-Boot] [PATCH 1/3] mx5: lowlevel_init.S: Split init_clock macro   Stefano Babic
• [U-Boot] [PATCH 2/3] configs: mx51evk: Remove CONFIG_HAS_ETH1   Stefano Babic
• [U-Boot] [PATCH 3/3] configs: mx53evk: Remove CONFIG_HAS_ETH1   Stefano Babic
• [U-Boot] [PATCH 1/3] configs: mx53loco: Remove CONFIG_HAS_ETH1   Stefano Babic
• [U-Boot] [PATCH] mx6qsabrelite: enable DCache and MMC bounce buffer   Stefano Babic
• [U-Boot] [PATCH] mx5: Add workaround for ARM erratum ID 468414   Stefano Babic
• [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Stefano Babic
• [U-Boot] [PATCH] mx25pdk: Use internal RAM for stack pointer   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Stefano Babic
• [U-Boot] [PATCH V3 01/32] imximage: check dcd_len as entries added   Stefano Babic
• [U-Boot] [PATCH V3 02/32] imximage: remove redundant setting of app_dest_ptr   Stefano Babic
• [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location   Stefano Babic
• [U-Boot] [PATCH V3 04/32] imximage: fix size of image to load.   Stefano Babic
• [U-Boot] [PATCH V3 05/32] imximage: delay setting of image size   Stefano Babic
• [U-Boot] [PATCH V3 06/32] imximage: change parameters to set_imx_hdr   Stefano Babic
• [U-Boot] [PATCH V3 07/32] imximage: make set_imx_hdr_v1/v2 easier to read   Stefano Babic
• [U-Boot] [PATCH V3 08/32] imximage: make header variable length   Stefano Babic
• [U-Boot] [PATCH V3 08/32] imximage: make header variable length   Stefano Babic
• [U-Boot] [PATCH v2 4/4] OMAP3: add video support to the mcx board   Stefano Babic
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Stefano Babic
• [U-Boot] [PATCH] MX5: fix warning in clock.c   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Stefano Babic
• [U-Boot] [PATCH v3 4/6] mic: Add support for mc34704   Stefano Babic
• [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH v3 4/6] mic: Add support for mc34704   Stefano Babic
• [U-Boot] [PATCH v3 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk   Stefano Babic
• [U-Boot] [PATCH V3 1/6] ARM: Fix start.S when used with SPL in arm1136   Stefano Babic
• [U-Boot] [PATCH V3 1/6] ARM: Fix start.S when used with SPL in arm1136   Stefano Babic
• [U-Boot] [PATCH] MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk   Stefano Babic
• [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Stefano Babic
• [U-Boot] [PATCH v3 1/6] mx25pdk: Include CONFIG_MX25   Stefano Babic
• [U-Boot] [PATCH 2/5] mx25pdk: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH 3/5] mx51evk: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH 4/5] mx35pdk: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH 5/5] mx6qsabre_common: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Stefano Babic
• [U-Boot] [PATCH v4 01/24] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Stefano Babic
• [U-Boot] [PATCH v4 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Stefano Babic
• [U-Boot] [PATCH] libfdt: Add helper function to create a trivial, empty tree   Gerald Van Baren
• [U-Boot] [PATCH 1/6] fdt: Check error codes returned from fdtlib when loading ITB   Jerry Van Baren
• [U-Boot] mips port   Jerry Van Baren
• [U-Boot] [PATCH - resend due to bounce] libfdt: Add fdt functionality for more intuitive   Jerry Van Baren
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Jerry Van Baren
• [U-Boot] [fdt] Pull request   Jerry Van Baren
• [U-Boot] [U-Boot, 2/6] fdt: Limit printed hex in fdt print and list commands   Jerry Van Baren
• [U-Boot] MPC8360 arbiter settings   Michael Barkowski
• [U-Boot] [PATCH V2] ARM: prevent misaligned array inits   Andreas Bießmann
• [U-Boot] [PATCH V2] ARM: prevent misaligned array inits   Andreas Bießmann
• [U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.   Andreas Bießmann
• [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration   Andreas Bießmann
• [U-Boot] [PATCH 02/14] avr32: Change bi_baudrate and global data baudrate to int   Andreas Bießmann
• [U-Boot] [PATCH v2 1/3] mmc: at91: add multi block read/write support.   Andreas Bießmann
• [U-Boot] [PATCH v2 2/3] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] mmc: at91: use max timeout value. It will avoid some situation that timeout happened.   Andreas Bießmann
• [U-Boot] [PATCH] common/cmd_ext_common: measure throughput   Andreas Bießmann
• [U-Boot] [PATCH] avr32: allow multi block mmc access for all boards   Andreas Bießmann
• [U-Boot] [PATCH] common/cmd_ext_common: measure throughput   Andreas Bießmann
• [U-Boot] [PATCH] common/lcd: fix eldk 4.2 compile warning   Andreas Bießmann
• [U-Boot] [PATCH] common/lcd: fix eldk 4.2 compile warning   Andreas Bießmann
• [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH] common/lcd: fix eldk 4.2 compile warning   Andreas Bießmann
• [U-Boot] [PATCH v2] common/cmd_ext_common: measure throughput   Andreas Bießmann
• [U-Boot] [RFC] common/lcd: use lcd_setcolreg() in bitmap_plot   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] [RFC] common/lcd: use lcd_setcolreg() in bitmap_plot   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Andreas Bießmann
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Andreas Bießmann
• [U-Boot] [PATCH v3] fs/fs.c: do_fsload: measure throughput   Andreas Bießmann
• [U-Boot] [PATCH] fs/fs.c: fix fs_set_blk_dev() for manual relocation   Andreas Bießmann
• [U-Boot] [PATCH v3] fs/fs.c: do_fsload: measure throughput   Andreas Bießmann
• [U-Boot] [PATCH] fs/fs.c: fix fs_set_blk_dev() for manual relocation   Andreas Bießmann
• [U-Boot] [PATCH] fs: handle CONFIG_NEEDS_MANUAL_RELOC   Andreas Bießmann
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Andreas Bießmann
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Andreas Bießmann
• [U-Boot] OK6410 board uboot   Kaushal Billore
• [U-Boot] [PATCH 0/9 V2] EXYNOS5: Add Audio support   Rajeshwari Birje
• [U-Boot] [PATCH 1/9 V3] SOUND: SAMSUNG: Add I2S driver   Rajeshwari Birje
• [U-Boot] [PATCH 2/9 V3] SOUND: Add WM8994 codec   Rajeshwari Birje
• [U-Boot] [PATCH 1/9] x86: Change board baud_rate to ulong   Gabe Black
• [U-Boot] [PATCH 2/9] x86: Add initial memory barrier macros   Gabe Black
• [U-Boot] [PATCH 5/9] x86: coreboot: Move non-board specific files to coreboot arch directory   Gabe Black
• [U-Boot] [PATCH 7/9] x86: coreboot: Modify u-boot code to allow building coreboot payload   Gabe Black
• [U-Boot] [PATCH 9/9] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Gabe Black
• [U-Boot] Extload question   Ed Bone
• [U-Boot] [PATCH] configs: Fix usage of mmc rescan   Andrew Bradford
• [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks   Andrew Bradford
• [U-Boot] [PATCH v2 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] [PATCH v2 1/4] am33xx: Enable UART{1,2,3,4,5} clocks   Andrew Bradford
• [U-Boot] [PATCH v2 2/4] am33xx: Enable UART{1,2,3,4,5} pin-mux   Andrew Bradford
• [U-Boot] [PATCH v2 3/4] serial: ns16550: Enable COM5 and COM6   Andrew Bradford
• [U-Boot] [PATCH v2 4/4] am335x_evm: Enable use of UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] [PATCH v2 4/4] am335x_evm: Enable use of UART{1, 2, 3, 4, 5}   Andrew Bradford
• [U-Boot] [PATCH v3 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] [PATCH v3 1/4] am33xx: Enable UART{1,2,3,4,5} clocks   Andrew Bradford
• [U-Boot] [PATCH v3 2/4] am33xx: Enable UART{1,2,3,4,5} pin-mux   Andrew Bradford
• [U-Boot] [PATCH v3 3/4] serial: ns16550: Enable COM5 and COM6   Andrew Bradford
• [U-Boot] [PATCH v3 4/4] am335x_evm: Enable use of UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] [PATCH v3 4/4] am335x_evm: Enable use of UART{1, 2, 3, 4, 5}   Andrew Bradford
• [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] [PATCH v4 1/4] am33xx: Enable UART{1,2,3,4,5} clocks   Andrew Bradford
• [U-Boot] [PATCH v4 2/4] am33xx: Enable UART{1,2,3,4,5} pin-mux   Andrew Bradford
• [U-Boot] [PATCH v4 3/4] serial: ns16550: Enable COM5 and COM6   Andrew Bradford
• [U-Boot] [PATCH v4 4/4] am335x_evm: Enable use of UART{1,2,3,4,5}   Andrew Bradford
• [U-Boot] Where can I get a copy of ePAPR?   Tim Brown
• [U-Boot] Where can I get a copy of ePAPR?   Tim Brown
• [U-Boot] Multiple stdin/out without CONFIG_CONSOLE_MUX?   Holger Brunck
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Huang Changming-R66093
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Huang Changming-R66093
• [U-Boot] [PATCH 6/7] lcd: Implement RLE8 bitmap decoding   Che-liang Chiou
• [U-Boot] [PATCH 40/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver   Thomas Chou
• [U-Boot] [PATCH 39/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver   Thomas Chou
• [U-Boot] [PATCH 39/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver   Thomas Chou
• [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller   Jaehoon Chung
• [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller   Jaehoon Chung
• [U-Boot] [PATCH v3 1/2] mmc: dw-mmc: support DesignWare MMC Controller   Jaehoon Chung
• [U-Boot] [PATCH v3 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
• [U-Boot] [RFC] After called the mmc_initialize, i2c_init is called   Jaehoon Chung
• [U-Boot] [PATCH v3 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
• [U-Boot] [PATCH] s3c64xx: fix the compiler error and warning   Jaehoon Chung
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Jaehoon Chung
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Jaehoon Chung
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Jaehoon Chung
• [U-Boot] U-Boot git usage model   Jason Cooper
• [U-Boot] Compiling polarssl lib in uboot   Peter Czypek
• [U-Boot] Compiling polarssl lib in uboot   Peter Czypek
• [U-Boot] [PATCH v4 1/8] h2200: Add support for iPAQ h2200 palmtop   Lukasz Dalek
• [U-Boot] [PATCH v4 2/8] pxa: Add some stuff to examine cpu model and rev   Lukasz Dalek
• [U-Boot] [PATCH v4 3/8] usbether: Fixed bug when using with PXA25X chips   Lukasz Dalek
• [U-Boot] [PATCH v4 4/8] usbether: Define CONFIG_USB_ETH_{CDC, SUBSET}   Lukasz Dalek
• [U-Boot] [PATCH v4 5/8] usbether: Removed DEV_CONFIG_{CDC,SUBSET}   Lukasz Dalek
• [U-Boot] [PATCH v4 6/8] pxa25x: Add support for USB ethernet gadget   Lukasz Dalek
• [U-Boot] [PATCH v4 7/8] usb.h: Add udc_disconnect prototype to usb.h   Lukasz Dalek
• [U-Boot] [PATCH v4 8/8] h2200: Add USB CDC ethernet support   Lukasz Dalek
• [U-Boot] [PATCH v5 1/3] h2200: Add support for iPAQ h2200 palmtop   Lukasz Dalek
• [U-Boot] [PATCH v5 2/3] pxa: Add code to examine cpu model and revision   Lukasz Dalek
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Lukasz Dalek
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Lukasz Dalek
• [U-Boot] [PATCH v7] h2200: Add USB CDC ethernet support   Lukasz Dalek
• [U-Boot] [PATCH] h2200: Make use of default_serial_console   Lukasz Dalek
• [U-Boot] [PATCH v6] h2200: Add support for iPAQ h2200 palmtop   Lukasz Dalek
• [U-Boot] MPC8360 arbiter settings   Liu Dave-R63238
• [U-Boot] [PATCH v4 2/8] pxa: Add some stuff to examine cpu model and rev   Łukasz Dałek
• [U-Boot] [PATCH v4 1/8] h2200: Add support for iPAQ h2200 palmtop   Łukasz Dałek
• [U-Boot] [PATCH v4 1/8] h2200: Add support for iPAQ h2200 palmtop   Łukasz Dałek
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Łukasz Dałek
• [U-Boot] h2200 fails to build on current u-boot/next   Łukasz Dałek
• [U-Boot] v2012.10-rc2 tar balls on ftp   Deltour, Stephane
• [U-Boot] v2012.10-rc2 tar balls on ftp   Deltour, Stephane
• [U-Boot] KernelDoc   Wolfgang Denk
• [U-Boot] KernelDoc   Wolfgang Denk
• [U-Boot] [PATCH] TQM8xx: adjust linker script to grown code size   Wolfgang Denk
• [U-Boot] [PATCH] MPC85xx: remove support for TQM85xx boards   Wolfgang Denk
• [U-Boot] [PATCH] lsxl: set ncip to broadcast address   Wolfgang Denk
• [U-Boot] [PATCH 00/72 V3] serial: Massive rework of the serial subsystem   Wolfgang Denk
• [U-Boot] [PATCH] Improve license declaration for cmd_ini.h   Wolfgang Denk
• [U-Boot] [PATCH] Improve license declaration for cmd_ini.h   Wolfgang Denk
• [U-Boot] sram overflowed   Wolfgang Denk
• [U-Boot] Go command is not working   Wolfgang Denk
• [U-Boot] go command is not working for smdkv310 board   Wolfgang Denk
• [U-Boot] [NOTE] Mailing List / git / FTP / Web Server Outage   Wolfgang Denk
• [U-Boot] [NOTE] Mailing List / git / FTP / Web Server Outage   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] [PATCH] net: Add tftp speed indication   Wolfgang Denk
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] U-Boot git usage model   Wolfgang Denk
• [U-Boot] USB Host driver for ISP1362?   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [PATCH] Prevent malloc with size 0   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] USB Host driver for ISP1362?   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_ext_common: measure throughput   Wolfgang Denk
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Wolfgang Denk
• [U-Boot] mpc82xx: Remove BMW board port   Wolfgang Denk
• [U-Boot] fw_printenv is not working   Wolfgang Denk
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Fix some ELDK 4.2 build issues   Wolfgang Denk
• [U-Boot] [PATCH 1/3] PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)   Wolfgang Denk
• [U-Boot] [PATCH 2/3] TQM8xx: adjust linker script to grown code size   Wolfgang Denk
• [U-Boot] [PATCH 3/3] ESTEEM192E: adjust linker script to grown code size   Wolfgang Denk
• [U-Boot] Where can I get a copy of ePAPR?   Wolfgang Denk
• [U-Boot] Merging device trees at runtime for module-based systems   Wolfgang Denk
• [U-Boot] Merging device trees at runtime for module-based systems   Wolfgang Denk
• [U-Boot] Merging device trees at runtime for module-based systems   Wolfgang Denk
• [U-Boot] ping failed; host 192.168.1.101 is not alive   Wolfgang Denk
• [U-Boot] Pull request: u-boot-mpc8xx/master   Wolfgang Denk
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Wolfgang Denk
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Wolfgang Denk
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Wolfgang Denk
• [U-Boot] Custodian branch base commits   Wolfgang Denk
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Wolfgang Denk
• [U-Boot] [PATCH] lib/vsprintf.c: don't special-case pointers to address null   Wolfgang Denk
• [U-Boot] Custodian branch base commits   Wolfgang Denk
• [U-Boot] Custodian branch base commits   Wolfgang Denk
• [U-Boot] Extload question   Wolfgang Denk
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Wolfgang Denk
• [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Wolfgang Denk
• [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Wolfgang Denk
• [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Wolfgang Denk
• [U-Boot] [PATCH] tegra: move common features to a common makefile   Marc Dietrich
• [U-Boot] [PATCH v4 07/16] tegra: Add LCD driver   Marc Dietrich
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
• [PATCH 2/2] * add CONFIG_SYS_CACLELINE_SIZE to eb_cpux9k2 board   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] arm: atmel: cpux9k2: add missing cache configs   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] M68K: eb_cpu5282: general update and enhanced board support   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH V2] M68K: eb_cpu5282: general update and enhanced board support   Jens Scharsig (BuS Elektronik)
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Fabio Estevam
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Fabio Estevam
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Fabio Estevam
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabreauto: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabreauto: Change mmcroot so it works out of box   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabreauto: Pass the board revision to the kernel   Fabio Estevam
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Fabio Estevam
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Fabio Estevam
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Fabio Estevam
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Fabio Estevam
• [U-Boot] I2C on mx25   Fabio Estevam
• [U-Boot] I2C on mx25   Fabio Estevam
• [U-Boot] I2C on mx25   Fabio Estevam
• [U-Boot] I2C on mx25   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx25pdk: Include CONFIG_MX25   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx25pdk: Add esdhc support   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx25pdk: Add FEC support   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx5: lowlevel_init.S: Split init_clock macro   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx5: lowlevel_init.S: Fix PLL settings for mx53   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx53loco: Adapt the IPU clock   Fabio Estevam
• [U-Boot] [PATCH 1/3] configs: mx53loco: Remove CONFIG_HAS_ETH1   Fabio Estevam
• [U-Boot] [PATCH 2/3] configs: mx51evk: Remove CONFIG_HAS_ETH1   Fabio Estevam
• [U-Boot] [PATCH 3/3] configs: mx53evk: Remove CONFIG_HAS_ETH1   Fabio Estevam
• [U-Boot] [PATCH v2 1/5] mx25pdk: Include CONFIG_MX25   Fabio Estevam
• [U-Boot] [PATCH v2 2/5] mx25pdk: Add esdhc support   Fabio Estevam
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Fabio Estevam
• [U-Boot] [PATCH v2 4/5] pmic: Add support for mc34704   Fabio Estevam
• [U-Boot] [PATCH v2 5/5] mx25pdk: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Fabio Estevam
• [U-Boot] [PATCH] mx25pdk: Use internal RAM for stack pointer   Fabio Estevam
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Fabio Estevam
• [U-Boot] [PATCH v3 1/6] mx25pdk: Include CONFIG_MX25   Fabio Estevam
• [U-Boot] [PATCH v3 2/6] mx25pdk: Add esdhc support   Fabio Estevam
• [U-Boot] [PATCH v3 3/6] pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH   Fabio Estevam
• [U-Boot] [PATCH v3 4/6] mic: Add support for mc34704   Fabio Estevam
• [U-Boot] [PATCH v3 5/6] mx25: Place common functions into sys_proto.h   Fabio Estevam
• [U-Boot] [PATCH v3 6/6] mx25pdk: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH v4 4/6] pmic: Add support for mc34704   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx25pdk: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx51evk: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx35pdk: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH 5/5] mx6qsabre_common: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] [PATCH v3 4/6] mic: Add support for mc34704   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Fabio Estevam
• [U-Boot] mx6qsabrelite: commands not recognized   Fabio Estevam
• [U-Boot] [PATCH] MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk   Fabio Estevam
• [U-Boot] [PATCH V3 1/6] ARM: Fix start.S when used with SPL in arm1136   Fabio Estevam
• [U-Boot] [PATCH 3/4] apf27: add spl support for the apf27   Fabio Estevam
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Gerlando Falauto
• [U-Boot] [PATCH] env: fix crash using default -f -a   Gerlando Falauto
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Gerlando Falauto
• [U-Boot] [PATCH v2 0/6] introducing vect1: mpc8309 keymile board   Gerlando Falauto
• [U-Boot] [PATCH v2 1/6] cosmetic: suvd3: align #defines   Gerlando Falauto
• [U-Boot] [PATCH v2 2/6] cleanup: use CONFIG_QE instead of CONFIG_MPC8360 || CONFIG_MPC832x   Gerlando Falauto
• [U-Boot] [PATCH v2 3/6] cleanup: introduce CONFIG_MPC830x   Gerlando Falauto
• [U-Boot] [PATCH v2 4/6] mpc83xx: add support for mpc8309   Gerlando Falauto
• [U-Boot] [PATCH v2 5/6] km83xx: add common support for km8309 boards   Gerlando Falauto
• [U-Boot] [PATCH v2 6/6] km83xx: add kmvect1 board   Gerlando Falauto
• [U-Boot] analyze/change assembly code   Gerlando Falauto
• [U-Boot] [PATCH] am33xx: pmic: Add support for tps65217   Joel A Fernandes
• [U-Boot] [PATCH 1/2] mmc: pxa: Flip over the remaining boards to pxa_mmc_generic   Andy Fleming
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Andy Fleming
• [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries   Andy Fleming
• [U-Boot] [PATCH 1/4] powerpc/t4qds: Add T4QDS board   Andy Fleming
• [U-Boot] [PATCH 4/4] powerpc/b4860qds: Add B4860QDS board   Andy Fleming
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Andy Fleming
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH] 8xxx: Change all 8*xx_DDR addresses to 8xxx   Andy Fleming
• [U-Boot] [PATCH] pmc405de and zeus: remove the env_ptr externs   Matthias Fuchs
• [U-Boot] [PATCH] am335x: add initial AM335x IDK board support   Matthias Fuchs
• [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Matthias Fuchs
• [U-Boot] CONFIG_SYS_TEXT_BASE for ARM versatilepb vs QEMU   Vipin Gahlaut
• [U-Boot] [PATCH] powerpc/boot: Change the compile macro for SRIO & PCIE boot master module   Liu Gang
• [U-Boot] [RFC PATCH 0/2] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [RFC PATCH 0/2] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [PATCH 00/32] Initial sparse fix series   David Gibson
• [U-Boot] [PATCH 00/32] Initial sparse fix series   David Gibson
• [U-Boot] Merging device trees at runtime for module-based systems   David Gibson
• [U-Boot] [PATCH 05/14] fdt: Export fdtdec_find_alias_node() function   David Gibson
• [U-Boot] [PATCH] tpm: Remove the LPC TPM driver   Simon Glass
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Simon Glass
• [U-Boot] [PATCH 1/8 V2] EXYNOS5: Add pinmux support for SPI   Simon Glass
• [U-Boot] [PATCH 2/8 V2] SPI: Add W25Q32 to Winbond SPI flash table   Simon Glass
• [U-Boot] [PATCH 3/8 V2] EXYNOS: Add clock for SPI.   Simon Glass
• [U-Boot] [PATCH 4/8 V2] EXYNOS5: Add base address for SPI.   Simon Glass
• [U-Boot] [PATCH 6/8] SPI: Add SPI Driver for EXYNOS.   Simon Glass
• [U-Boot] [PATCH 7/8 V2] EXYNOS5: Enable SPI   Simon Glass
• [U-Boot] [PATCH 8/8 V2] EXYNOS5: Enable SPI booting.   Simon Glass
• [U-Boot] [PATCH V4 2/4] ARM: arm1176: enable instruction cache in arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH 0/4] Some patman fixes   Simon Glass
• [U-Boot] Is there file size limiation of tftp   Simon Glass
• [U-Boot] [PATCH 3/3] tegra: enable CONFIG_CMD_PARTUUID   Simon Glass
• [U-Boot] gpt: GUID/UUID - GPT restoration - open questions - RESEND   Simon Glass
• [U-Boot] [PATCH 0/4] Keyboard input improvements   Simon Glass
• [U-Boot] [PATCH 0/6] bootstage: Add a number of new features   Simon Glass
• [U-Boot] [PATCH] tpm: Remove the LPC TPM driver   Simon Glass
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH 2/2] ext4: Fix unused variable warnings   Simon Glass
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH v2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Simon Glass
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH 2/2] ext4: Fix unused variable warnings   Simon Glass
• [U-Boot] [PATCH v2 2/2] tegra: nand: add board pinmux   Simon Glass
• [U-Boot] [PATCH 0/9] x86: Patches to enable running U-Boot from coreboot   Simon Glass
• [U-Boot] [PATCH 1/9] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH 2/9] x86: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Simon Glass
• [U-Boot] [PATCH 4/9] x86: Add some missing includes.   Simon Glass
• [U-Boot] [PATCH 5/9] x86: coreboot: Move non-board specific files to coreboot arch directory   Simon Glass
• [U-Boot] [PATCH 6/9] x86: coreboot: Tell u-boot about PCI bus 0 when initializing   Simon Glass
• [U-Boot] [PATCH 7/9] x86: coreboot: Modify u-boot code to allow building coreboot payload   Simon Glass
• [U-Boot] [PATCH 8/9] x86: coreboot: Implement recursively scanning PCI busses   Simon Glass
• [U-Boot] [PATCH 9/9] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Simon Glass
• [U-Boot] [PATCH 1/7] Tegra30: Add AVP (arm720t) files   Simon Glass
• [U-Boot] [PATCH 1/7] Tegra30: Add AVP (arm720t) files   Simon Glass
• [U-Boot] [PATCH 5/9] x86: coreboot: Move non-board specific files to coreboot arch directory   Simon Glass
• [U-Boot] [PATCH v4 15/16] lcd: Add CONSOLE_SCROLL_LINES option to speed console   Simon Glass
• [U-Boot] [PATCH v4 04/16] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH v4 14/16] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH v4 03/16] tegra: fdt: Add pwm binding and node   Simon Glass
• [U-Boot] [PATCH v5 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH v5 01/16] tegra: Use const for pinmux_config_pingroup/table()   Simon Glass
• [U-Boot] [PATCH v5 02/16] tegra: Add display support to funcmux   Simon Glass
• [U-Boot] [PATCH v5 03/16] tegra: fdt: Add pwm binding and node   Simon Glass
• [U-Boot] [PATCH v5 04/16] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
• [U-Boot] [PATCH v5 05/16] tegra: Add support for PWM   Simon Glass
• [U-Boot] [PATCH v5 06/16] tegra: Add SOC support for display/lcd   Simon Glass
• [U-Boot] [PATCH v5 07/16] tegra: Add LCD driver   Simon Glass
• [U-Boot] [PATCH v5 08/16] tegra: Add LCD support to Nvidia boards   Simon Glass
• [U-Boot] [PATCH v5 09/16] arm: Add control over cachability of memory regions   Simon Glass
• [U-Boot] [PATCH v5 10/16] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment   Simon Glass
• [U-Boot] [PATCH v5 11/16] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH v5 12/16] tegra: Align LCD frame buffer to section boundary   Simon Glass
• [U-Boot] [PATCH v5 13/16] tegra: Support control of cache settings for LCD   Simon Glass
• [U-Boot] [PATCH v5 14/16] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH v5 15/16] lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console   Simon Glass
• [U-Boot] [PATCH v5 16/16] tegra: Enable display/lcd support on Seaboard   Simon Glass
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH v4 07/16] tegra: Add LCD driver   Simon Glass
• [U-Boot] [PATCH v6 04/16] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
• [U-Boot] [PATCH v6 07/16] tegra: Add LCD driver   Simon Glass
• [U-Boot] [PATCH v6 14/16] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH 2/2] spi: Add SPI flash test   Simon Glass
• [U-Boot] [PATCH v2 2/2] spi: Add SPI flash test   Simon Glass
• [U-Boot] [PATCH] Sandbox: Add spi driver to sandbox   Simon Glass
• [U-Boot] [PATCH 5/7] lcd: Fix fb offset calculation for bpix == 16 in BMP display   Simon Glass
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Simon Glass
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Simon Glass
• [U-Boot] [PATCH v2 0/10] x86: Patches to enable running U-Boot from coreboot   Simon Glass
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v2 02/10] x86: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH v2 03/10] x86: Allow excluding reset vector code from u-boot   Simon Glass
• [U-Boot] [PATCH v2 04/10] x86: Add some missing includes.   Simon Glass
• [U-Boot] [PATCH v2 05/10] x86: coreboot: Move non-board specific files to coreboot arch directory   Simon Glass
• [U-Boot] [PATCH v2 06/10] x86: coreboot: Tell u-boot about PCI bus 0 when initializing   Simon Glass
• [U-Boot] [PATCH v2 07/10] x86: coreboot: Modify u-boot code to allow building coreboot payload   Simon Glass
• [U-Boot] [PATCH v2 08/10] x86: coreboot: Implement recursively scanning PCI busses   Simon Glass
• [U-Boot] [PATCH v2 09/10] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Simon Glass
• [U-Boot] [PATCH v2 10/10] x86: Remove coreboot start16 code   Simon Glass
• [U-Boot] [PATCH] net: Add tftp speed indication   Simon Glass
• [U-Boot] [PATCH v2] net: Add tftp speed indication   Simon Glass
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH 1/5] input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty   Simon Glass
• [U-Boot] [PATCH 2/5] input: Provide a board specific mechanism to decide whether to skip i8042 init   Simon Glass
• [U-Boot] [PATCH 3/5] input: i8042: Provide feature to disable keyboard before booting kernel   Simon Glass
• [U-Boot] [PATCH 4/5] input: Fix i8042 keyboard reset   Simon Glass
• [U-Boot] [PATCH 5/5] input: Add ANSI 3.64 escape sequence generation.   Simon Glass
• [U-Boot] [PATCH 1/5] input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty   Simon Glass
• [U-Boot] [PATCH v2 1/5] input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty   Simon Glass
• [U-Boot] [PATCH v2 2/5] input: Provide a board specific mechanism to decide whether to skip i8042 init   Simon Glass
• [U-Boot] [PATCH] x86: coreboot: Enable i8042 keyboard   Simon Glass
• [U-Boot] [PATCH 2/5] input: Provide a board specific mechanism to decide whether to skip i8042 init   Simon Glass
• [U-Boot] [PATCH 0/14] Homogenise baud rate type to unsigned int   Simon Glass
• [U-Boot] [PATCH 01/14] sh: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 02/14] avr32: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 03/14] m68k: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 04/14] microblaze: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 05/14] nios2: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 06/14] openrisc: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 07/14] powerpc: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 08/14] sparc: Change bi_baudrate and global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 09/14] arm: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 10/14] blackfin: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 11/14] mips: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 12/14] nds32: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 13/14] x86: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 14/14] sandbox: Change global data baudrate to int   Simon Glass
• [U-Boot] [PATCH 1/7] ide: Add printf format string for CONFIG_SYS_64BIT_LBA option   Simon Glass
• [U-Boot] [PATCH 2/7] usb: Support the CONFIG_SYS_64BIT_LBA option   Simon Glass
• [U-Boot] [PATCH 3/7] disk: Make the disk partition code work with no specific partition types   Simon Glass
• [U-Boot] [PATCH 4/7] disk: Address cast and format errors   Simon Glass
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Simon Glass
• [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
• [U-Boot] [PATCH 7/7] config: Enable CBFS, ext4 for coreboot   Simon Glass
• [U-Boot] [RFC PATCH 1/2] fs: delete unused Makefile   Simon Glass
• [U-Boot] [PATCH 1/5] x86: coreboot: Drop sysinfo.c   Simon Glass
• [U-Boot] [PATCH 2/5] x86: coreboot: Decode additional coreboot sysinfo tags   Simon Glass
• [U-Boot] [PATCH 3/5] x86: Add CBMEM console driver for coreboot   Simon Glass
• [U-Boot] [PATCH 4/5] x86: Add console command to display CBMEM console buffer   Simon Glass
• [U-Boot] [PATCH 5/5] x86: Select stdio devices for coreboot   Simon Glass
• [U-Boot] Problem with first use of patman   Simon Glass
• [U-Boot] Problem with first use of patman [FIXED]   Simon Glass
• [U-Boot] [PATCH] patman: force git log commands to not use color   Simon Glass
• [U-Boot] [PATCH v2] patman: force git log commands to not use color   Simon Glass
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Simon Glass
• [U-Boot] [PATCH 4/9] ppc4xx: Fix strict-aliasing warnings in usb_ohci.c   Simon Glass
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Simon Glass
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Simon Glass
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH 1/9 V2] SOUND: Add I2S driver   Simon Glass
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH v5 09/16] arm: Add control over cachability of memory regions   Simon Glass
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH v7 01/16] tegra: Use const for pinmux_config_pingroup/table()   Simon Glass
• [U-Boot] [PATCH v7 02/16] tegra: Add display support to funcmux   Simon Glass
• [U-Boot] [PATCH v7 03/16] tegra: fdt: Add pwm binding and node   Simon Glass
• [U-Boot] [PATCH v7 04/16] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
• [U-Boot] [PATCH v7 05/16] tegra: Add support for PWM   Simon Glass
• [U-Boot] [PATCH v7 06/16] tegra: Add SOC support for display/lcd   Simon Glass
• [U-Boot] [PATCH v7 07/16] tegra: Add LCD driver   Simon Glass
• [U-Boot] [PATCH v7 08/16] tegra: Add LCD support to Nvidia boards   Simon Glass
• [U-Boot] [PATCH v7 09/16] arm: Add control over cachability of memory regions   Simon Glass
• [U-Boot] [PATCH v7 10/16] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment   Simon Glass
• [U-Boot] [PATCH v7 11/16] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH v7 12/16] tegra: Align LCD frame buffer to section boundary   Simon Glass
• [U-Boot] [PATCH v7 13/16] tegra: Support control of cache settings for LCD   Simon Glass
• [U-Boot] [PATCH v7 14/16] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH v7 15/16] lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console   Simon Glass
• [U-Boot] [PATCH v7 16/16] tegra: Enable display/lcd support on Seaboard   Simon Glass
• [U-Boot] [PATCH 1/6 V5] EXYNOS5: Add pinmux support for SPI   Simon Glass
• [U-Boot] [PATCH 5/6 V5] EXYNOS5: Enable SPI   Simon Glass
• [U-Boot] [PATCH 6/6 V5] EXYNOS5: Enable SPI booting.   Simon Glass
• [U-Boot] [PATCH 8/8 V2] EXYNOS5: Enable SPI booting.   Simon Glass
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Simon Glass
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Simon Glass
• [U-Boot] [PATCH 2/4] ARM: tegra: combine duplicate Makefile rules   Simon Glass
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Simon Glass
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Simon Glass
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] Access IO register with writel/readl?   Simon Glass
• [U-Boot] [PATCH 0/20] AHCI / SATA Improvements   Simon Glass
• [U-Boot] [PATCH 01/20] ahci: Support splitting of read transactions into multiple chunks   Simon Glass
• [U-Boot] [PATCH 02/20] scsi: Provide support for a list of AHCI controllers.   Simon Glass
• [U-Boot] [PATCH 03/20] scsi: Add scsi_write to SCSI driver   Simon Glass
• [U-Boot] [PATCH 04/20] scsi: Add function to report number of scsi drives   Simon Glass
• [U-Boot] [PATCH 05/20] ahci: Optimise AHCI controller reset and start-up   Simon Glass
• [U-Boot] [PATCH 06/20] ahci: Improve AHCI debugging   Simon Glass
• [U-Boot] [PATCH 07/20] ahci: cosmetics and cleanup   Simon Glass
• [U-Boot] [PATCH 08/20] ahci: Make sending the SETFEATURES_XFER command optional   Simon Glass
• [U-Boot] [PATCH 09/20] ahci: support scsi writing in AHCI driver.   Simon Glass
• [U-Boot] [PATCH 10/20] ahci: Make the AHCI code find the capacity of disks > 128 GB properly   Simon Glass
• [U-Boot] [PATCH 11/20] ahci: Use sizeof(fis) instead of hardcoding '20'   Simon Glass
• [U-Boot] [PATCH 12/20] ahci: Put all uses of ahci_set_feature() under CONFIG_AHCI_SETFEATURES_XFER   Simon Glass
• [U-Boot] [PATCH 13/20] scsi: Put 'scsi_device_list' variable under CONFIG_PCI   Simon Glass
• [U-Boot] [PATCH 14/20] ahci: Use virt_to_phys() to denote physical addresses for DMA   Simon Glass
• [U-Boot] [PATCH 15/20] ahci: flush / invalidate dcache around SATA commands   Simon Glass
• [U-Boot] [PATCH 16/20] ahci: Adjust SATA timeouts for hard disk (spinup delay & command timeout)   Simon Glass
• [U-Boot] [PATCH 17/20] ahci: Support spin-up and link-up separately   Simon Glass
• [U-Boot] [PATCH 18/20] ahci: Perform SATA flush after disk write.   Simon Glass
• [U-Boot] [PATCH 19/20] ahci: Expand HDD Logical Block addressability up to 32 bits   Simon Glass
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Simon Glass
• [U-Boot] [PATCH V2 3/5] ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it   Simon Glass
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Simon Glass
• [U-Boot] [PATCH V2 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Simon Glass
• [U-Boot] [PATCH V2 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Simon Glass
• [U-Boot] [PATCH 2/9 V2] SOUND: Add WM8994 codec   Simon Glass
• [U-Boot] [PATCH 3/9 V2] Sound: Add command for audio playback   Simon Glass
• [U-Boot] [PATCH 4/9 V2] EXYNOS: Add I2S registers   Simon Glass
• [U-Boot] [PATCH 5/9 V2] EXYNOS: Add parameters required by I2S   Simon Glass
• [U-Boot] [PATCH 6/9 V2] EXYNOS: Add pinmux for I2S   Simon Glass
• [U-Boot] [PATCH 7/9 V2] EXYNOS: Add I2S base address   Simon Glass
• [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable Sound   Simon Glass
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH 1/3] x86: gpio: Add GPIO driver for Intel ICH6 and later.   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Simon Glass
• [U-Boot] [PATCH 3/3] x86: gpio: Add additional GPIO banks to the ICH6 driver   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Simon Glass
• [U-Boot] [PATCH 0/12] Add additional x86 support for coreboot   Simon Glass
• [U-Boot] [PATCH 01/12] x86: Allow compiling out realmode/bios code   Simon Glass
• [U-Boot] [PATCH 02/12] x86: Remove coreboot start16 code   Simon Glass
• [U-Boot] [PATCH 03/12] x86: video: Add coreboot framebuffer support   Simon Glass
• [U-Boot] [PATCH 04/12] x86: Add an fdt pointer to the global data structure   Simon Glass
• [U-Boot] [PATCH 05/12] x86: Add a minimal device tree for alex x86   Simon Glass
• [U-Boot] [PATCH 06/12] x86: Add a default implementation for cleanup_before_linux()   Simon Glass
• [U-Boot] [PATCH 07/12] x86: Add a dummy implementation for timer_get_us   Simon Glass
• [U-Boot] [PATCH 08/12] x86: Initialize the device tree pointer to NULL in i386.   Simon Glass
• [U-Boot] [PATCH 09/12] x86: Include types.h explicitly in the i386 version of io.h   Simon Glass
• [U-Boot] [PATCH 10/12] x86: Fix typo in pcat_timer.c   Simon Glass
• [U-Boot] [PATCH 11/12] x86: Define CONFIG_SYS_VSNPRINTF for coreboot   Simon Glass
• [U-Boot] [PATCH 12/12] x86: Don't spam POST80 codes with slow IO functions   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Simon Glass
• [U-Boot] [PATCH 1/2] mmc: Fix interpretation of MMC_CMD_ALL_SEND_CID   Simon Glass
• [U-Boot] [PATCH 2/2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Simon Glass
• [U-Boot] [PATCH 04/20] scsi: Add function to report number of scsi drives   Simon Glass
• [U-Boot] [PATCH 7/7] config: Enable CBFS, ext4 for coreboot   Simon Glass
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Simon Glass
• [U-Boot] U-Boot / Coreboot integration   Simon Glass
• [U-Boot] U-Boot / Coreboot integration   Simon Glass
• [U-Boot] [PATCH] ext4: Fix printf() format string error   Simon Glass
• [U-Boot] [PATCH 0/15] x86: Add cache and memory functions   Simon Glass
• [U-Boot] [PATCH 01/15] x86: Add function to read time stamp counter   Simon Glass
• [U-Boot] [PATCH 02/15] x86: Enable coreboot timestamp facility support in u-boot.   Simon Glass
• [U-Boot] [PATCH 03/15] x86: Add a CBMEM timestamp generated right before the kernel startup.   Simon Glass
• [U-Boot] [PATCH 04/15] x86: Fill in the dram info using the e820 map on coreboot/x86   Simon Glass
• [U-Boot] [PATCH 05/15] x86: Add basic cache operations   Simon Glass
• [U-Boot] [PATCH 06/15] x86: Provide a function to clean up just before booting a zimage   Simon Glass
• [U-Boot] [PATCH 07/15] x86: Add functions to access MSRs   Simon Glass
• [U-Boot] [PATCH 08/15] x86: Clean up MTRR 7 right before jumping to the kernel   Simon Glass
• [U-Boot] [PATCH 09/15] x86: Fix indirect jmp warning in zimage.c   Simon Glass
• [U-Boot] [PATCH 10/15] x86: Enable CONFIG_CMD_ZBOOT for coreboot   Simon Glass
• [U-Boot] [PATCH 11/15] x86: Ignore memory >4GB when parsing Coreboot tables   Simon Glass
• [U-Boot] [PATCH 12/15] x86: Fix off-by-one error in do_elf_reloc_fixups()   Simon Glass
• [U-Boot] [PATCH 13/15] x86: Increase the size of the phys_size_t and phys_addr_t types   Simon Glass
• [U-Boot] [PATCH 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Simon Glass
• [U-Boot] [PATCH 15/15] x86: Implement arch_phys_memset so that it can wipe memory above 4GB   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Simon Glass
• [U-Boot] [PATCH 1/9 V3] SOUND: SAMSUNG: Add I2S driver   Simon Glass
• [U-Boot] [PATCH 2/9 V3] SOUND: Add WM8994 codec   Simon Glass
• [U-Boot] [PATCH 3/9 V3] Sound: Add command for audio playback   Simon Glass
• [U-Boot] [PATCH 8/9 V3] EXYNOS: Add clock for I2S   Simon Glass
• [U-Boot] [PATCH 0/9 V3] EXYNOS5: Add Audio support   Simon Glass
• [U-Boot] [PATCH 4/6 V7] SPI: Add SPI Driver for EXYNOS.   Simon Glass
• [U-Boot] [PATCH 1/6 V7] EXYNOS5: Add pinmux support for SPI   Simon Glass
• [U-Boot] [PATCH 2/6 V7] EXYNOS: Add clock for SPI.   Simon Glass
• [U-Boot] [PATCH 5/6 V7] EXYNOS5: Enable SPI   Simon Glass
• [U-Boot] [PATCH 6/6 V7] EXYNOS5: Enable SPI booting.   Simon Glass
• [U-Boot] [PATCH 0/6 V7] EXYNOS5: Enable SPI support   Simon Glass
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Simon Glass
• [U-Boot] [PATCH V3 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Simon Glass
• [U-Boot] [PATCH V3 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Simon Glass
• [U-Boot] [PATCH V3 3/5] ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it   Simon Glass
• [U-Boot] [PATCH V3 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Simon Glass
• [U-Boot] [PATCH V3 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Simon Glass
• [U-Boot] [PATCH v2 04/20] scsi: Add function and env var to report number of scsi drives   Simon Glass
• [U-Boot] [PATCH 2/2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Simon Glass
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
• [U-Boot] [PATCH v2 02/19] scsi: Provide support for a list of AHCI controllers.   Simon Glass
• [U-Boot] [PATCH v2 02/19] scsi: Provide support for a list of AHCI controllers.   Simon Glass
• [U-Boot] [PATCH 0/14] fdt: Add various device tree utilities and features   Simon Glass
• [U-Boot] [PATCH 01/14] fdt: Add function to get config int from device tree   Simon Glass
• [U-Boot] [PATCH 02/14] fdt: Add function to get a config string from device tree   Simon Glass
• [U-Boot] [PATCH 03/14] fdt: Add fdtdec_decode_region() to decode memory region   Simon Glass
• [U-Boot] [PATCH 04/14] fdt: Add function for decoding multiple gpios globally available   Simon Glass
• [U-Boot] [PATCH 05/14] fdt: Export fdtdec_find_alias_node() function   Simon Glass
• [U-Boot] [PATCH 06/14] fdt: Export fdtdec_lookup() and fix the name   Simon Glass
• [U-Boot] [PATCH 07/14] fdt: Add function to read boolean property   Simon Glass
• [U-Boot] [PATCH 08/14] fdt: Add fdtdec_get_uint64 to decode a 64-bit value from a property   Simon Glass
• [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Simon Glass
• [U-Boot] [PATCH 10/14] fdt: Load boot command from device tree   Simon Glass
• [U-Boot] [PATCH 11/14] fdt: Tell the FDT library where the device tree is   Simon Glass
• [U-Boot] [PATCH 12/14] fdt: Allow device tree to specify secure booting   Simon Glass
• [U-Boot] [PATCH 13/14] fdt: Add option to default to most compatible conf in a fit image   Simon Glass
• [U-Boot] [PATCH 14/14] fdt: Set kernaddr if fdt indicates a kernel is present   Simon Glass
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Simon Glass
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Simon Glass
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Simon Glass
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
• [U-Boot] [PATCH] usb: tegra: move Tegra EHCI implementation to correct place   Simon Glass
• [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support   Simon Glass
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Simon Glass
• [U-Boot] [PATCH] tegra20: initialize variable to avoid compiler warning   Simon Glass
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Simon Glass
• [U-Boot] [PATCH v2 1/2] SPL: make jump_to_image_no_args a weak symbol   Simon Glass
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Simon Glass
• [U-Boot] Merging device trees at runtime for module-based systems   Simon Glass
• [U-Boot] [PATCH 0/20] AHCI / SATA Improvements   Simon Glass
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
• [U-Boot] [PATCH v3 0/22] AHCI / SATA Improvements   Simon Glass
• [U-Boot] [PATCH v3 01/22] ahci: Support splitting of read transactions into multiple chunks   Simon Glass
• [U-Boot] [PATCH v3 02/22] scsi: Provide support for a list of AHCI controllers.   Simon Glass
• [U-Boot] [PATCH v3 03/22] scsi: Add scsi_write to SCSI driver   Simon Glass
• [U-Boot] [PATCH v3 04/22] Support setenv_ulong() and setenv_addr() for powerpc   Simon Glass
• [U-Boot] [PATCH v3 05/22] scsi: Add function and env var to report number of scsi drives   Simon Glass
• [U-Boot] [PATCH v3 06/22] ahci: Optimise AHCI controller reset and start-up   Simon Glass
• [U-Boot] [PATCH v3 07/22] ahci: Improve AHCI debugging   Simon Glass
• [U-Boot] [PATCH v3 08/22] ahci: cosmetics and cleanup   Simon Glass
• [U-Boot] [PATCH v3 09/22] ahci: Make sending the SETFEATURES_XFER command optional   Simon Glass
• [U-Boot] [PATCH v3 10/22] ahci: support scsi writing in AHCI driver   Simon Glass
• [U-Boot] [PATCH v3 11/22] ahci: Make the AHCI code find the capacity of disks > 128 GB properly   Simon Glass
• [U-Boot] [PATCH v3 12/22] ahci: Use sizeof(fis) instead of hardcoding '20'   Simon Glass
• [U-Boot] [PATCH v3 13/22] ahci: Fix 'Invaild' typo   Simon Glass
• [U-Boot] [PATCH v3 14/22] ahci: Support 64-bit LBA option when reading capacity   Simon Glass
• [U-Boot] [PATCH v3 15/22] ahci: Use virt_to_phys() to denote physical addresses for DMA   Simon Glass
• [U-Boot] [PATCH v3 16/22] ahci: flush / invalidate dcache around SATA commands   Simon Glass
• [U-Boot] [PATCH v3 17/22] ahci: Adjust SATA timeouts for hard disk (spinup delay & command timeout)   Simon Glass
• [U-Boot] [PATCH v3 18/22] ahci: Support spin-up and link-up separately   Simon Glass
• [U-Boot] [PATCH v3 19/22] ahci: Perform SATA flush after disk write.   Simon Glass
• [U-Boot] [PATCH v3 20/22] ahci: Expand HDD Logical Block addressability up to 32 bits   Simon Glass
• [U-Boot] [PATCH v3 21/22] ide: Correct function signatures for ide_read/write()   Simon Glass
• [U-Boot] [PATCH v3 22/22] x86: config: Enable AHCI support for coreboot   Simon Glass
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
• [U-Boot] [PATCH v3 21/22] ide: Correct function signatures for ide_read/write()   Simon Glass
• [U-Boot] [PATCH 2/8] tegra: usb: make controller init functions more self contained   Simon Glass
• [U-Boot] [PATCH 1/8] tegra: usb: convert USB_PORTS_MAX to be a define   Simon Glass
• [U-Boot] [PATCH 4/8] tegra: usb: remove unneeded function parameter   Simon Glass
• [U-Boot] [PATCH 3/8] tegra: usb: fold initial pll setup into board_usb_init   Simon Glass
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Simon Glass
• [U-Boot] [PATCH 6/8] tegra: usb: various small cleanups   Simon Glass
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Simon Glass
• [U-Boot] [PATCH 8/8] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]   Simon Glass
• [U-Boot] [PATCH 1/8] tegra: usb: convert USB_PORTS_MAX to be a define   Simon Glass
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Simon Glass
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Simon Glass
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Simon Glass
• [U-Boot] [PATCH 2/8] tegra: usb: make controller init functions more self contained   Simon Glass
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Simon Glass
• [U-Boot] [PATCH] patman: Issue empty change logs for unchanged patches   Simon Glass
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Simon Glass
• [U-Boot] x86: Anyone willing to take over the reigns   Simon Glass
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
• [U-Boot] [PATCH 1/2] tegra: i2c: Add function to know about current bus   Simon Glass
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Simon Glass
• [U-Boot] [PATCH v8 11/16] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 20/25] drivers/input/input.c: sparse fix   Simon Glass
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
• [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Simon Glass
• [U-Boot] [PATCH 2/2] MAKEALL: Add options for incremental building   Simon Glass
• [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Simon Glass
• [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Simon Glass
• [U-Boot] [PATCH] WIP: cbfs: Add docbook template   Simon Glass
• [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
• [U-Boot] [PATCH] git-mailrc: Change x86 maintainer to Simon   Simon Glass
• [U-Boot] sram overflowed   Grant
• [U-Boot] sram overflowed   Grant
• [U-Boot] sram overflowed   Grant
• [U-Boot] sram overflowed   Grant
• [U-Boot] [PATCH v3 05/14] mx51: Fix USB PHY clocks   Igor Grinberg
• [U-Boot] [PATCH v3 1/2] usb: ulpi: add indicator configuration function   Igor Grinberg
• [U-Boot] [PATCH v2] Add a new "ini" command   Igor Grinberg
• [U-Boot] [PATCH 0/2] cm-t3x: minor config updates and cleanups   Igor Grinberg
• [U-Boot] [PATCH 1/2] cm-t35: clean unused defines from config   Igor Grinberg
• [U-Boot] [PATCH 2/2] cm-t35: increase the MAXARGS   Igor Grinberg
• [U-Boot] [PATCH 2/2] cm-t35: increase the MAXARGS   Igor Grinberg
• [U-Boot] [PATCH] net: Add tftp speed indication   Igor Grinberg
• [U-Boot] [PATCH v2] net: Add tftp speed indication   Igor Grinberg
• [U-Boot] [PATCH v4 5/5] New board support: Nokia RX-51 aka N900   Igor Grinberg
• [U-Boot] [PATCH v2 2/2] ARM: lacie_kw: add support for WIRELESS_SPACE   Simon Guinot
• [U-Boot] u-boot/master slight regression with trats   Anatolij Gustschin
• [U-Boot] [PATCH 0/6] bootstage: Add a number of new features   Anatolij Gustschin
• [U-Boot] [PATCH] i2c: sh: Remove irq_wait function   Anatolij Gustschin
• [U-Boot] [PATCH v2] ml507: Fix Xilinx uartlite driver hang   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] GPIO: pca953x: fix spelling in help   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] GPIO: pca953x: fix error reporting   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging/next   Anatolij Gustschin
• [U-Boot] [PATCH] arm: arm925t: remove SX1 board   Anatolij Gustschin
• [U-Boot] [PATCH v1 3/4] VIDEO: add macro to set LCD size for DSS driver   Anatolij Gustschin
• [U-Boot] [PATCH v1 3/4] VIDEO: add macro to set LCD size for DSS driver   Anatolij Gustschin
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Anatolij Gustschin
• [U-Boot] [PATCH v5 4/5] cfb_console: Add support for some ANSI terminal escape codes   Anatolij Gustschin
• [U-Boot] [PATCH v4 4/5] cfb_console: Add support for some ANSI terminal escape codes   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Anatolij Gustschin
• [U-Boot] ping failed; host 192.168.1.101 is not alive   Anatolij Gustschin
• [U-Boot] U-Boot Ethernet Connectivity Issues   Harms, Joel K
• [U-Boot] [PATCH] OMAP3: igep0020: Add pad config for WIFI/BT GPIOs   Anders Hedlund
• [U-Boot] [PATCH] OMAP3: igep0020: Add pad config for WIFI/BT GPIOs   Anders Hedlund
• [U-Boot] [PATCH] OMAP3: igep0020: Add pad config for WIFI/BT GPIOs   Anders Hedlund
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Rob Herring
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Rob Herring
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Rob Herring
• [U-Boot] [PATCH 04/20] scsi: Add function to report number of scsi drives   Rob Herring
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Rob Herring
• [U-Boot] [PATCH V3 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Rob Herring
• [U-Boot] [PATCH 00/10] IDE code cleanup   Pavel Herrmann
• [U-Boot] [PATCH 01/10] remove CONFIG_SC3 from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 02/10] split mpc8xx hooks from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 03/10] split IVM power hooks from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 04/10] change all versions of input_data() and output_data() to global weak aliases   Pavel Herrmann
• [U-Boot] [PATCH 05/10] split CPC45 board-specific IDE functions from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 06/10] make ide_led() a weak alias   Pavel Herrmann
• [U-Boot] [PATCH 07/10] move CPC45 ide_led to the same file as other IDE hooks   Pavel Herrmann
• [U-Boot] [PATCH 08/10] split AU1X00 specific code from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 09/10] split PCS440EP specific code from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 10/10] remove unnecessary includes from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 08/10] split AU1X00 specific code from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 05/10] split CPC45 board-specific IDE functions from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH 04/10] change all versions of input_data() and output_data() to global weak aliases   Pavel Herrmann
• [U-Boot] [PATCH v2 02/10] split mpc8xx hooks from cmd_ide.c   Pavel Herrmann
• [U-Boot] [PATCH v2 04/10] change all versions of input_data() and output_data() to global weak aliases   Pavel Herrmann
• [U-Boot] [PATCH v2 07/10] move CPC45 ide_led to the same file as other IDE hooks   Pavel Herrmann
• [U-Boot] [PATCH v2 08/10] split AU1X00 specific code from cmd_ide.c   Pavel Herrmann
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Pavel Herrmann
• [U-Boot] [PATCH V3 2/4] FAT: make use of disk_partition_t.part   Pavel Herrmann
• [U-Boot] [PATCH V3 2/4] FAT: make use of disk_partition_t.part   Pavel Herrmann
• [U-Boot] [PATCH] ZFS: fix some warnings, cleanup   Pavel Herrmann
• [U-Boot] [PATCH 2/5] common: Implement support for linker-generated arrays   Joe Hershberger
• [U-Boot] [PATCH 1/5] common: Add symbol handling for generic lists into Makefile   Joe Hershberger
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Joe Hershberger
• [U-Boot] [PATCH 4/5] common: Convert the U-Boot commands to LG-arrays   Joe Hershberger
• [U-Boot] [PATCH 5/5] common: Discard the __u_boot_cmd section   Joe Hershberger
• [U-Boot] [PATCH 05/12] tools/env: Serialize calls to fw_*env   Joe Hershberger
• [U-Boot] [PATCH] net: fix netconsole filtering   Joe Hershberger
• [U-Boot] [PATCH v2 0/5] Cleanup fw_*env and a few common env   Joe Hershberger
• [U-Boot] [PATCH v2 1/5] tools/env: Use a board-specific default env   Joe Hershberger
• [U-Boot] [PATCH v2 2/5] tools/env: Remove unneeded complexity   Joe Hershberger
• [U-Boot] [PATCH v2 3/5] tools/env: Don't call env_init() in fw_getenv()   Joe Hershberger
• [U-Boot] [PATCH v2 4/5] tools/env: Serialize calls to fw_*env   Joe Hershberger
• [U-Boot] [PATCH v2 5/5] env: Check for NULL pointer in envmatch()   Joe Hershberger
• [U-Boot] [PATCH] Change dead code in "test" cmd to debug output   Joe Hershberger
• [U-Boot] [PATCH 1/2] Fix checkpatch.pl complaints in cmd_cache.c   Joe Hershberger
• [U-Boot] [PATCH 2/2] Cleanup cache command prints   Joe Hershberger
• [U-Boot] [PATCH v2] Add a new "ini" command   Joe Hershberger
• [U-Boot] [PATCH v2] Add a command to access the system timer   Joe Hershberger
• [U-Boot] [PATCH v2] Output strings from echo with puts where easy   Joe Hershberger
• [U-Boot] [PATCH 1/6] fdt: Check error codes returned from fdtlib when loading ITB   Joe Hershberger
• [U-Boot] [PATCH] tools: Add a README note about fw_printenv lock file   Joe Hershberger
• [U-Boot] [PATCH] Improve license declaration for cmd_ini.h   Joe Hershberger
• [U-Boot] [PATCH] env: cosmetic: Consilidate the default env definition   Joe Hershberger
• [U-Boot] [PATCH] tools/env: Fix build failure from missing header include   Joe Hershberger
• [U-Boot] [PATCH] tools/env: Fix build failure from missing header include   Joe Hershberger
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Joe Hershberger
• [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration   Joe Hershberger
• [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv   Joe Hershberger
• [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv   Joe Hershberger
• [U-Boot] [PATCH 1/2] tools/env: Fix variable delete operation   Joe Hershberger
• [U-Boot] [PATCH 2/2] tools/env: Improve debug prints   Joe Hershberger
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Joe Hershberger
• [U-Boot] [PATCH 1/6 V5] common: Add symbol handling for generic lists into Makefile   Joe Hershberger
• [U-Boot] [PATCH 1/6 V5] common: Add symbol handling for generic lists into Makefile   Joe Hershberger
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Joe Hershberger
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Joe Hershberger
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Joe Hershberger
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Joe Hershberger
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Joe Hershberger
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Joe Hershberger
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Joe Hershberger
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Joe Hershberger
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Joe Hershberger
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Joe Hershberger
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Joe Hershberger
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Joe Hershberger
• [U-Boot] Linker errors from .u_boot_list in powerpc   Joe Hershberger
• [U-Boot] Linker errors from .u_boot_list in powerpc   Joe Hershberger
• [U-Boot] Linker errors from .u_boot_list in powerpc   Joe Hershberger
• [U-Boot] [PATCH] lib/vsprintf.c: don't special-case pointers to address null   Joe Hershberger
• [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Joe Hershberger
• [U-Boot] [PATCH 2/2] MAKEALL: Add options for incremental building   Joe Hershberger
• [U-Boot] [PATCH] Add board_name to CONFIG_ENV_VARS_UBOOT_CONFIG   Joe Hershberger
• [U-Boot] [PATCH v9] [RFC] Add dmmalloc module for DM.   Tomas Hlavacek
• [U-Boot] [PATCH v9] [RFC] Add dmmalloc module for DM.   Tomas Hlavacek
• [U-Boot] [PATCH v10] Add dmmalloc module for DM.   Tomas Hlavacek
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Jeroen Hofstee
• [U-Boot] [PATCH V2] arm: armv7: omap3: Fix restore sequence in lowlevel_init   Jeroen Hofstee
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Jeroen Hofstee
• [U-Boot] [PATCH] phylib: Enable SMSC LAN87xx PHY support   Mingkai Hu
• [U-Boot] ARM : Removing unwind dummy functions   Gabriel Huau
• [U-Boot] [PATCH 2/2] mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER   Liu Hui-R64343
• [U-Boot] [PATCH/resend] arm: rmobile: Add support PFC of Renesas SH73A0   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] rmobile: Fix build timer driver with BUILD_DIR   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] i2c: sh: Remove irq_wait function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 0/2] ColdFire: Fix the MAKEALL errors for some ColdFire boards   Jason Jin
• [U-Boot] [PATCH 1/2] ColdFire: Fix build error for astro mcf53731 board.   Jason Jin
• [U-Boot] [PATCH 2/2] ColdFire: Fix the build error for Freescale m5282evb board.   Jason Jin
• [U-Boot] [PATCH 0/2][RESEND] ColdFire: Fix the MAKEALL errors for some ColdFire boards   Jason Jin
• [U-Boot] [PATCH 1/2] ColdFire: Fix build error for astro mcf53731 board.   Jason Jin
• [U-Boot] [PATCH 2/2] ColdFire: Fix the build error for Freescale m5282evb board.   Jason Jin
• [U-Boot] [PATCH 0/2]ColdFire: Fix build errors for ColdFire M54418TWR boards   Jason Jin
• [U-Boot] [PATCH 1/2]ColdFire: Update the lds file for M54418TWR board.   Jason Jin
• [U-Boot] [PATCH 2/2]ColdFire: Remove save env in NAND support for M54418TWR board.   Jason Jin
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Greg KH
• [U-Boot] MAINTAINERS: New maintainer for Samsung's Trats development board.   Minkyu Kang
• [U-Boot] [PATCH 3/4] EXYNOS: additional Exynos4 SoC series support   Minkyu Kang
• [U-Boot] [PATCH] arm: trats: Power down core 1   Minkyu Kang
• [U-Boot] [PATCH v3 0/2] Exynos4: add software SPI support on Universal C210 board   Minkyu Kang
• [U-Boot] [PATCH 0/5] EXYNOS4: Enable I2C support   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Minkyu Kang
• [U-Boot] [PATCH] trats: Enable EXT4 and EFI partitions support on Samsung's Trats board   Minkyu Kang
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Minkyu Kang
• [U-Boot] [ARM] [STATUS] ATTENTION: Uu-boot-arm/master branch ROLLBACK to 28e5ac2d   Minkyu Kang
• [U-Boot] [ARM] [STATUS] ATTENTION: Uu-boot-arm/master branch ROLLBACK to 28e5ac2d   Minkyu Kang
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Minkyu Kang
• [U-Boot] [PATCH 0/6] EXYNOS: Add support for Exynos4x10   Minkyu Kang
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Minkyu Kang
• [U-Boot] [PATCH v3 0/2] Exynos4: add software SPI support on Universal C210 board   Minkyu Kang
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Minkyu Kang
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Minkyu Kang
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Minkyu Kang
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Minkyu Kang
• [U-Boot] [PATCH 5/6 V6] EXYNOS5: Enable SPI   Minkyu Kang
• [U-Boot] [PATCH 8/9 V2] EXYNOS: Add clock for I2S   Minkyu Kang
• [U-Boot] [PATCH 1/6 V5] EXYNOS5: Add pinmux support for SPI   Minkyu Kang
• [U-Boot] [PATCH v3 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Minkyu Kang
• [U-Boot] [PATCH 07/10] dm: wdt: Move s5p watchdog timer to drivers/watchdog/   Minkyu Kang
• [U-Boot] [PATCH 0/2 V3] EXYNOS5: Add MAX77686 support   Minkyu Kang
• [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx   Minkyu Kang
• [U-Boot] [PATCH v3] ARCH: EXYNOS: add support to match product id   Minkyu Kang
• [U-Boot] [PATCH v2] EXYNOS: Clock: Add common function for pll rate calculation   Minkyu Kang
• [U-Boot] [PATCH 2/6 V7] EXYNOS: Add clock for SPI.   Minkyu Kang
• [U-Boot] [PATCH] s3c64xx: fix the compiler error and warning   Minkyu Kang
• [U-Boot] [PATCH] ARCH: EXYNOS: add support to match product id   Chander Kashyap
• [U-Boot] [PATCH] EXYNOS: Clock: Add common function for pll rate calculation   Chander Kashyap
• [U-Boot] [PATCH 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
• [U-Boot] [PATCH 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Chander Kashyap
• [U-Boot] [PATCH 2/3] EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [PATCH 3/3] EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
• [U-Boot] [PATCH v2 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Chander Kashyap
• [U-Boot] [PATCH v2 2/3] EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [PATCH v2 3/3] EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
• [U-Boot] [PATCH] EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency   Chander Kashyap
• [U-Boot] Need of MMU in uboot level   Chander Kashyap
• [U-Boot] go command is not working for smdkv310 board   Chander Kashyap
• [U-Boot] [PATCH v2] EXYNOS: Clock: Add common function for pll rate calculation   Chander Kashyap
• [U-Boot] [PATCH v2] ARCH: EXYNOS: add support to match product id   Chander Kashyap
• [U-Boot] [PATCH v2] ARCH: EXYNOS: add support to match product id   Chander Kashyap
• [U-Boot] [PATCH v3] ARCH: EXYNOS: add support to match product id   Chander Kashyap
• [U-Boot] [PATCH 7/9 V2] EXYNOS: Add I2S base address   Chander Kashyap
• [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable Sound   Chander Kashyap
• [U-Boot] [PATCH 8/9 V2] EXYNOS: Add clock for I2S   Chander Kashyap
• [U-Boot] [PATCH 5/7] lcd: Fix fb offset calculation for bpix == 16 in BMP display   Nikita Kiryanov
• [U-Boot] v2012.10-rc2 is now released   Nikita Kiryanov
• [U-Boot] [RFC] common/lcd: use lcd_setcolreg() in bitmap_plot   Nikita Kiryanov
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Troy Kisky
• [U-Boot] [PATCH V3 01/32] imximage: check dcd_len as entries added   Troy Kisky
• [U-Boot] [PATCH V3 02/32] imximage: remove redundant setting of app_dest_ptr   Troy Kisky
• [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location   Troy Kisky
• [U-Boot] [PATCH V3 04/32] imximage: fix size of image to load.   Troy Kisky
• [U-Boot] [PATCH V3 05/32] imximage: delay setting of image size   Troy Kisky
• [U-Boot] [PATCH V3 06/32] imximage: change parameters to set_imx_hdr   Troy Kisky
• [U-Boot] [PATCH V3 07/32] imximage: make set_imx_hdr_v1/v2 easier to read   Troy Kisky
• [U-Boot] [PATCH V3 08/32] imximage: make header variable length   Troy Kisky
• [U-Boot] [PATCH V3 09/32] imximage: remove static imximage_version   Troy Kisky
• [U-Boot] [PATCH V3 10/32] imximage: prepare to move static variables to struct data_src   Troy Kisky
• [U-Boot] [PATCH V3 11/32] imximage: change parameters for set_dcd_val/set_imx_hdr   Troy Kisky
• [U-Boot] [PATCH V3 12/32] imximage: move set_imx_hdr to struct data_src   Troy Kisky
• [U-Boot] [PATCH V3 13/32] imximage: move set_dcd_val to struct data_src   Troy Kisky
• [U-Boot] [PATCH V3 14/32] imximage: enable word writes for version2 header   Troy Kisky
• [U-Boot] [PATCH V3 15/32] tools: add parse_helper file   Troy Kisky
• [U-Boot] [PATCH V3 16/32] imximage: use parse_helper functions   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 18/32] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants   Troy Kisky
• [U-Boot] [PATCH V3 19/32] mx6q_4x_mt41j128.cfg: add comments   Troy Kisky
• [U-Boot] [PATCH V3 20/32] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset   Troy Kisky
• [U-Boot] [PATCH V3 21/32] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory   Troy Kisky
• [U-Boot] [PATCH V3 22/32] mx6q_4x_mt41j128.cfg: force ZQ calibration   Troy Kisky
• [U-Boot] [PATCH V3 23/32] mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite   Troy Kisky
• [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q   Troy Kisky
• [U-Boot] [PATCH V3 25/32] imx-common: cpu: add imx_ddr_size   Troy Kisky
• [U-Boot] [PATCH V3 26/32] arch-mx6: add mx6dl_pins.h   Troy Kisky
• [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite   Troy Kisky
• [U-Boot] [PATCH V3 28/32] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support   Troy Kisky
• [U-Boot] [PATCH V3 29/32] Add boards for sabrelite variants mx6s(solo) and mx6dl(duallite)   Troy Kisky
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Troy Kisky
• [U-Boot] [PATCH V3 31/32] parse_helper: add expression evaluation   Troy Kisky
• [U-Boot] [PATCH V3 32/32] imx-mkimage.h: use base + offset syntax   Troy Kisky
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Troy Kisky
• [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Troy Kisky
• [U-Boot] [PATCH V3 28/32] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support   Troy Kisky
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Troy Kisky
• [U-Boot] [PATCH V3 25/32] imx-common: cpu: add imx_ddr_size   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q   Troy Kisky
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Troy Kisky
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH V3 03/32] imximage: move flash_offset check to common location   Troy Kisky
• [U-Boot] [PATCH V3 08/32] imximage: make header variable length   Troy Kisky
• [U-Boot] [PATCH V3 08/32] imximage: make header variable length   Troy Kisky
• [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog   Troy Kisky
• [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet   Troy Kisky
• [U-Boot] [PATCH V3 1/9] doc/README.fec_mxc: add documentation   Troy Kisky
• [U-Boot] [PATCH V3 2/9] net: fec_mxc: delete CONFIG_FEC_MXC_MULTI   Troy Kisky
• [U-Boot] [PATCH V3 3/9] net: fec_mxc: change fec_mii_setspeed parameter   Troy Kisky
• [U-Boot] [PATCH V3 4/9] net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi   Troy Kisky
• [U-Boot] [PATCH V3 5/9] phy: add phy_find_by_mask/phy_connect_dev   Troy Kisky
• [U-Boot] [PATCH V3 6/9] net: fec_mxc: use fec_set_dev_name to set name   Troy Kisky
• [U-Boot] [PATCH V3 7/9] net: fec_mxc: only call phy_connect in fec_probe   Troy Kisky
• [U-Boot] [PATCH V3 8/9] net: fec_mxc: get phydev before fec_probe   Troy Kisky
• [U-Boot] [PATCH V3 9/9] mx6qsabrelite: search mii phy address 4-7   Troy Kisky
• [U-Boot] [PATCH V1 0/5] prepare for mx6dl/ mx6solo   Troy Kisky
• [U-Boot] [PATCH V1 1/5] mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite   Troy Kisky
• [U-Boot] [PATCH V1 2/5] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q   Troy Kisky
• [U-Boot] [PATCH V1 3/5] imx-common: cpu: add imx_ddr_size   Troy Kisky
• [U-Boot] [PATCH V1 4/5] arch-mx6: add mx6dl_pins.h   Troy Kisky
• [U-Boot] [PATCH V1 5/5] imximage.cfg: run files through C preprocessor   Troy Kisky
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] am335x: add mux config for DDR3 version of beaglebone   Koen Kooi
• [U-Boot] [PATCH 0/5] am33xx: support non-ti boards   Peter Korsgaard
• [U-Boot] [PATCH 1/5] am33xx: move ti i2c baseboard header handling to board/ti/am335x/evm.{c, h}   Peter Korsgaard
• [U-Boot] [PATCH 2/5] am335x/evm.c: don't make wdtimer/uart_base global   Peter Korsgaard
• [U-Boot] [PATCH 3/5] am33xx/board: use cpu_mmc_init() for default mmc initialization   Peter Korsgaard
• [U-Boot] [PATCH 4/5] am33xx: move generic parts of pinmux handling out from board/ti/am335x   Peter Korsgaard
• [U-Boot] [PATCH 5/5] am33xx: support board specific ddr settings   Peter Korsgaard
• [U-Boot] [PATCH 3/5] am33xx/board: use cpu_mmc_init() for default mmc initialization   Peter Korsgaard
• [U-Boot] [PATCH 5/5] am33xx: support board specific ddr settings   Peter Korsgaard
• [U-Boot] [PATCH 3/3] am33xx: Add SPI SPL as an option   Peter Korsgaard
• [U-Boot] [PATCH 1/3] omap3_spi: Undo CONFIG_AM33XX D0/D1 change   Peter Korsgaard
• [U-Boot] [PATCH 1/5] am33xx: move ti i2c baseboard header handling to board/ti/am335x/evm.{c, h}   Peter Korsgaard
• [U-Boot] [PATCH 1/3] omap3_spi: Undo CONFIG_AM33XX D0/D1 change   Peter Korsgaard
• [U-Boot] [PATCH] omap3_spi: introduce CONFIG_OMAP3_SPI_D0_D1_SWAPPED   Peter Korsgaard
• [U-Boot] [PATCH 1/5] am33xx: move ti i2c baseboard header handling to board/ti/am335x/evm.{c, h}   Peter Korsgaard
• [U-Boot] [PATCHv2 0/6] am33xx: support non-ti boards   Peter Korsgaard
• [U-Boot] [PATCHv2 1/6] am33xx/board.c: make wdtimer/uart_base static   Peter Korsgaard
• [U-Boot] [PATCHv2 2/6] am33xx: move ti i2c baseboard header handling to board/ti/am335x/   Peter Korsgaard
• [U-Boot] [PATCHv2 3/6] am33xx/board: use cpu_mmc_init() for default mmc initialization   Peter Korsgaard
• [U-Boot] [PATCHv2 4/6] am33xx: move generic parts of pinmux handling out from board/ti/am335x   Peter Korsgaard
• [U-Boot] [PATCHv2 5/6] am33xx: support board specific ddr settings   Peter Korsgaard
• [U-Boot] [PATCHv2 6/6] am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part numbers   Peter Korsgaard
• [U-Boot] [PATCHv2 2/6] am33xx: move ti i2c baseboard header handling to board/ti/am335x/   Peter Korsgaard
• [U-Boot] [PATCHv2 0/6] am33xx: support non-ti boards   Peter Korsgaard
• [U-Boot] [PATCHv2 0/6] am33xx: support non-ti boards   Peter Korsgaard
• [U-Boot] [PATCH] am335x: add initial AM335x IDK board support   Peter Korsgaard
• [U-Boot] Fwd: u-boot fails at Start.S in P2020   vidya Krishnamoorthy
• [U-Boot] reg: P2020 include config file - u-boot basic doubt   vidya Krishnamoorthy
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Viresh Kumar
• [U-Boot] mpc85xx debug TLB entry   Prabhakar Kushwaha
• [U-Boot] mpc85xx debug TLB entry   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Prabhakar Kushwaha
• [U-Boot] nds32: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT   Macpaul Lin
• [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Stephan Linz
• [U-Boot] [PATCH 2/4] microblaze: Fix byteorder for microblaze   Stephan Linz
• [U-Boot] which toolchain version for Microblaze   Stephan Linz
• [U-Boot] [PATCH] powerpc/board: add present2 register definition for QIXIS   Shengzhou Liu
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Shengzhou Liu
• [U-Boot] [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Shengzhou Liu
• [U-Boot] [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Shengzhou Liu
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Xiangfu Liu
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Xiangfu Liu
• [U-Boot] [PATCH v5 1/2] qi_lb60: add nand spl support   Xiangfu Liu
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   Xiangfu Liu
• [U-Boot] [PATCH v5 1/2] qi_lb60: add nand spl support   Xiangfu Liu
• [U-Boot] Allwinner A10 with 2GBytes of RAM, U-Boot Configuration   Paulo Louro
• [U-Boot] How to enable debug information in u-boot   Paulo Louro
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Pavel Machek
• [U-Boot] [PATCH 0/2] socfpga/spl: Cleanup   Pavel Machek
• [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
• [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
• [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
• [U-Boot] Performance of the ARM's PL310 L2 cache.   Lukasz Majewski
• [U-Boot] u-boot/master slight regression with trats   Lukasz Majewski
• [U-Boot] u-boot/master slight regression with trats   Lukasz Majewski
• [U-Boot] u-boot/master slight regression with trats   Lukasz Majewski
• [U-Boot] [PATCH 08/16] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
• [U-Boot] [PATCH] MAINTAINERS: New maintainer for Samsung's Trats development board.   Lukasz Majewski
• [U-Boot] gpt: GUID/UUID - GPT restoration - open questions - RESEND   Lukasz Majewski
• [U-Boot] [u-boot] Adding missing CONFIG_SYS_CACHELINE_SIZE to boards definitions   Lukasz Majewski
• [U-Boot] [PATCH] trats: Enable EXT4 and EFI partitions support on Samsung's Trats board   Lukasz Majewski
• [U-Boot] [PATCH v2 00/21] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH v2 01/21] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
• [U-Boot] [PATCH v2 02/21] pmic:i2c: Add I2C byte order to PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v2 03/21] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
• [U-Boot] [PATCH v2 04/21] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Lukasz Majewski
• [U-Boot] [PATCH v2 06/21] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
• [U-Boot] [PATCH v2 07/21] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
• [U-Boot] [PATCH v2 08/21] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH v2 09/21] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
• [U-Boot] [PATCH v2 10/21] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v2 11/21] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
• [U-Boot] [PATCH v2 12/21] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
• [U-Boot] [PATCH v2 13/21] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
• [U-Boot] [PATCH v2 14/21] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 15/21] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 16/21] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 17/21] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 18/21] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
• [U-Boot] [PATCH v2 19/21] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 20/21] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v2 21/21] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Lukasz Majewski
• [U-Boot] [PATCH v3 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Lukasz Majewski
• [U-Boot] [PATCH v2 02/21] pmic:i2c: Add I2C byte order to PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Lukasz Majewski
• [U-Boot] [PATCH v2 06/21] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
• [U-Boot] [PATCH v2 08/21] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH v2 06/21] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Lukasz Majewski
• [U-Boot] [PATCH] trats: Enable EXT4 and EFI partitions support on Samsung's Trats board   Lukasz Majewski
• [U-Boot] [PATCH v2 09/21] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Lukasz Majewski
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Lukasz Majewski
• [U-Boot] [PATCH v2 09/21] pmic: Extend struct pmic to support battery and charger related operations [explanation]   Lukasz Majewski
• [U-Boot] [RFC] After called the mmc_initialize, i2c_init is called   Lukasz Majewski
• [U-Boot] [PATCH v3 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH v3 01/24] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
• [U-Boot] [PATCH v3 02/24] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v3 03/24] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
• [U-Boot] [PATCH v3 04/24] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
• [U-Boot] [PATCH v3 05/24] pmic: Introduce power_init_board() method at ./lib/board.c file   Lukasz Majewski
• [U-Boot] [PATCH v3 06/24] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
• [U-Boot] [PATCH v3 07/24] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
• [U-Boot] [PATCH v3 08/24] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH v3 09/24] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
• [U-Boot] [PATCH v3 10/24] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v3 11/24] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
• [U-Boot] [PATCH v3 12/24] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
• [U-Boot] [PATCH v3 13/24] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
• [U-Boot] [PATCH v3 14/24] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 15/24] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 16/24] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 17/24] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 18/24] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
• [U-Boot] [PATCH v3 19/24] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 20/24] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v3 21/24] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
• [U-Boot] [PATCH v3 22/24] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files   Lukasz Majewski
• [U-Boot] [PATCH v3 23/24] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER   Lukasz Majewski
• [U-Boot] [PATCH v3 24/24] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER   Lukasz Majewski
• [U-Boot] [PATCH v2 3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH   Lukasz Majewski
• [U-Boot] [PATCH v3 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH v3 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH v3 08/24] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH v4 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH v4 01/24] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
• [U-Boot] [PATCH v4 02/24] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v4 03/24] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
• [U-Boot] [PATCH v4 04/24] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
• [U-Boot] [PATCH v4 05/24] pmic: Introduce power_init_board() method at ./lib/board.c file   Lukasz Majewski
• [U-Boot] [PATCH v4 06/24] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
• [U-Boot] [PATCH v4 07/24] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
• [U-Boot] [PATCH v4 08/24] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH v4 09/24] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
• [U-Boot] [PATCH v4 10/24] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
• [U-Boot] [PATCH v4 11/24] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
• [U-Boot] [PATCH v4 12/24] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
• [U-Boot] [PATCH v4 13/24] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
• [U-Boot] [PATCH v4 14/24] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 15/24] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 16/24] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 17/24] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 18/24] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
• [U-Boot] [PATCH v4 19/24] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 20/24] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
• [U-Boot] [PATCH v4 21/24] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
• [U-Boot] [PATCH v4 22/24] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files   Lukasz Majewski
• [U-Boot] [PATCH v4 23/24] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER   Lukasz Majewski
• [U-Boot] [PATCH v4 24/24] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER   Lukasz Majewski
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Lukasz Majewski
• [U-Boot] [PATCH v4 08/24] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Lukasz Majewski
• [U-Boot] [PATCH v4 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] Booting through nand flash with other address   Manukumar
• [U-Boot] Booting through nand flash with other address   Manukumar
• [U-Boot] USB detection   Manukumar
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Mark Marshall
• [U-Boot] [PATCH 02/20] scsi: Provide support for a list of AHCI controllers.   Mark Marshall
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH V2 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Allen Martin
• [U-Boot] [PATCH V2 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Allen Martin
• [U-Boot] [PATCH V2 3/5] ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it   Allen Martin
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Allen Martin
• [U-Boot] [PATCH V2 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Allen Martin
• [U-Boot] [PATCH 1/2] SPL: make jump_to_image_no_args a weak symbol   Allen Martin
• [U-Boot] [PATCH 2/2] tegra: move to common SPL framework   Allen Martin
• [U-Boot] [PATCH v2 1/2] SPL: make jump_to_image_no_args a weak symbol   Allen Martin
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Allen Martin
• [U-Boot] [PATCH] HACK: fix return value of serial_assign to get printfs working again   Allen Martin
• [U-Boot] [PATCH] tegra20: initialize variable to avoid compiler warning   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Allen Martin
• [U-Boot] [PATCH 1/2] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH 2/2] tegra: seaboard: Enable USB keyboard   Allen Martin
• [U-Boot] [PATCH 1/2] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH 2/2] tegra: seaboard: Enable USB keyboard   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Allen Martin
• [U-Boot] [PATCH v2 3/3] tegra: Enable USB keyboard   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v3 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v3 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Allen Martin
• [U-Boot] [PATCH v3 3/3] tegra: Enable USB keyboard   Allen Martin
• [U-Boot] [PATCH v3 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v4 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Allen Martin
• [U-Boot] [PATCH v4 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Allen Martin
• [U-Boot] [PATCH v4 3/3] tegra: Enable USB keyboard   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Allen Martin
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Allen Martin
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Allen Martin
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Allen Martin
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Allen Martin
• [U-Boot] [PATCH] arm720t: add back common.h include   Allen Martin
• [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"   McClintock Matthew-B29882
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   McClintock Matthew-B29882
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   McClintock Matthew-B29882
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Peter Meerwald
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Peter Meerwald
• [U-Boot] [PATCH] fs: zfs: fix illegal use of fp   Alejandro Mery
• [U-Boot] mips port   Dmytro Milinevskyy
• [U-Boot] mips port   Dmytro Milinevskyy
• [U-Boot] mips port   Dmytro Milinevskyy
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH 0/2] socfpga/spl: Cleanup   Vikram Narayanan
• [U-Boot] [PATCH 1/2] socfpga/spl: Remove timer_init from spl_board_init   Vikram Narayanan
• [U-Boot] [PATCH 2/2] socfpga/spl: Remove malloc.h   Vikram Narayanan
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH v2] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH] nand_spl: Define nand_select function   Vikram Narayanan
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH] nand_spl: Define nand_select function   Vikram Narayanan
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Vikram Narayanan
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Vikram Narayanan
• [U-Boot] UBIFS fails on SheevaPlug   Vikram Narayanan
• [U-Boot] UBIFS fails on SheevaPlug   Vikram Narayanan
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Vikram Narayanan
• [U-Boot] UBIFS fails on SheevaPlug   Vikram Narayanan
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Vikram Narayanan
• [U-Boot] UBIFS fails on SheevaPlug   Vikram Narayanan
• [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support   Eric Nelson
• [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support   Eric Nelson
• [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support   Eric Nelson
• [U-Boot] [PATCH 0/2] i.MX: Allow pad configuration arrays to be const   Eric Nelson
• [U-Boot] [PATCH 1/2] i.MX: iomux: input pad array can be const   Eric Nelson
• [U-Boot] [PATCH 2/2] i.MX: declare iomux_v3_cfg_t arrays as const   Eric Nelson
• [U-Boot] [PATCH 0/2] i.MX: Allow const video mode specifiers   Eric Nelson
• [U-Boot] [PATCH 1/2] i.MX video: struct fb_videomode can be const   Eric Nelson
• [U-Boot] [PATCH 2/2] i.MX: ipufb: add const to fb_videomode declarations   Eric Nelson
• [U-Boot] [PATCH 1/3] i.MX6: set drive strength for parallel RGB pads   Eric Nelson
• [U-Boot] [PATCH 2/3] i.MX6: add HDMI transmitter register declarations from kernel WIP.   Eric Nelson
• [U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: Add splash screen support   Eric Nelson
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Eric Nelson
• [U-Boot] [PATCH V3 00/32] Add mx6solo/mx6duallite support   Eric Nelson
• [U-Boot] [PATCH 0/3] Add support for the Boundary Devices Nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 2/3] nitrogen6x: configure and toggle PHY reset for Nitrogen6x   Eric Nelson
• [U-Boot] [PATCH 3/3] nitrogen6x: initialize WL12XX pads, use to determine board type   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Eric Nelson
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Eric Nelson
• [U-Boot] [PATCH V3 21/32] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Eric Nelson
• [U-Boot] [PATCH V3 28/32] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support   Eric Nelson
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Eric Nelson
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Eric Nelson
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Eric Nelson
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Eric Nelson
• [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Eric Nelson
• [U-Boot] mx6qsabrelite: commands not recognized   Eric Nelson
• [U-Boot] mx6qsabrelite: commands not recognized   Eric Nelson
• [U-Boot] [PATCH 1/5] mx53loco: Allow booting a zImage kernel   Robert Nelson
• [U-Boot] [PATCHv8] ARM: Add Altera SOCFPGA Cyclone5   Dinh Nguyen
• [U-Boot] [PATCH 0/2] socfpga/spl: Cleanup   Dinh Nguyen
• [U-Boot] fw_printenv is not working   Nih_a
• [U-Boot] [PATCH 2/3] i2c: common changes for multibus/multiadapter support   Henrik Nordström
• [U-Boot] [PATCH] TNETV107X: Change tnetv107x_evm maintainer   Chan-Taek Park
• [U-Boot] u-boot/master slight regression with trats   Kyungmin Park
• [U-Boot] [PATCH] arm: trats: Power down core 1   Kyungmin Park
• [U-Boot] I2C clock frequency on P1022/P1013   BRUNMAYR Peter
• [U-Boot] [PATCH 4/6] [v2] powerpc/85xx: Add P5040 processor support   Kim Phillips
• [U-Boot] [PATCH 6/7] [v4] powerpc/85xx: Add P5040 processor support   Kim Phillips
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Kim Phillips
• [U-Boot] [PATCH 01/32] include/linux/byteorder: import latest endian definitions from linux   Kim Phillips
• [U-Boot] [PATCH 02/32] include/linux/compat.h: fix warning: preprocessor token __iomem redefined   Kim Phillips
• [U-Boot] [PATCH 03/32] include/linux/unaligned/generic.h: fix warning: preprocessor token __force redefined   Kim Phillips
• [U-Boot] [PATCH 04/32] include/linux/stddef.h: avoid 'warning: preprocessor token offsetof redefined'   Kim Phillips
• [U-Boot] [PATCH 05/32] arch/powerpc/include/asm/io.h: fix warning: preprocessor token __iomem redefined   Kim Phillips
• [U-Boot] [PATCH 06/32] arch/powerpc/lib/bootm.c: fix noinline attribute   Kim Phillips
• [U-Boot] [PATCH 07/32] arch/powerpc/lib/extable.c: sparse fix   Kim Phillips
• [U-Boot] [PATCH 08/32] arch/powerpc/lib/board.c, *traps.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 09/32] include/common.h: sparse fix   Kim Phillips
• [U-Boot] [PATCH 10/32] include/command.h: sparse fix   Kim Phillips
• [U-Boot] [PATCH 11/32] include/image.h: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 12/32] common/cmd_*.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 13/32] common/misc: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 14/32] common/fdt_support.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 15/32] net/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 16/32] drivers/net/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 17/32] lib/zlib: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 18/32] lib/vsprintf.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 19/32] include/fdt.h: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 20/32] arch/powerpc/cpu/mpc8xxx/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 21/32] arch/powerpc/cpu/mpc85xx/fdt.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 22/32] powerpc/mpc85xx: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 23/32] powerpc/mpc83xx: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 24/32] drivers/block/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 25/32] drivers/gpio/mpc83xx_gpio.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 26/32] drivers/input/input.c: sparse fix   Kim Phillips
• [U-Boot] [PATCH 27/32] drivers/i2c/fsl_i2c.c: sparse fix   Kim Phillips
• [U-Boot] [PATCH 28/32] drivers/mmc/mmc.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 29/32] drivers/mmc/fsl_esdhc.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 30/32] drivers/mtd/cfi_flash.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 31/32] drivers/mtd/nand: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 32/32] drivers/serial/serial_ns16550.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Kim Phillips
• [U-Boot] [PATCH v2 5/6] km83xx: add common support for km8309 boards   Kim Phillips
• [U-Boot] [GIT PULL] u-boot-mpc83xx: add support for the mpc8309 and the kmvect1 board   Kim Phillips
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Kim Phillips
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Kim Phillips
• [U-Boot] [PATCH v2 00/32] Initial sparse fix series   Kim Phillips
• [U-Boot] [PATCH v2 01/25] include/linux/byteorder: import latest endian definitions from linux   Kim Phillips
• [U-Boot] [PATCH v2 02/25] include/linux/compat.h: fix warning: preprocessor token {__iomem, __user} redefined   Kim Phillips
• [U-Boot] [PATCH v2 03/25] include/linux/unaligned/generic.h: fix warning: preprocessor token __force redefined   Kim Phillips
• [U-Boot] [PATCH v2 04/25] include/linux/stddef.h: avoid 'warning: preprocessor token offsetof redefined'   Kim Phillips
• [U-Boot] [PATCH v2 05/25] arch/powerpc/include/asm/io.h: fix warning: preprocessor token __iomem redefined   Kim Phillips
• [U-Boot] [PATCH v2 06/25] arch/powerpc/lib/extable.c: sparse fix   Kim Phillips
• [U-Boot] [PATCH v2 07/25] arch/powerpc/lib/board.c, *traps.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 08/25] include/image.h: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 09/25] common/cmd_*.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 10/25] common/misc: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 11/25] net/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 12/25] drivers/net/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 13/25] lib/zlib: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 14/25] lib/vsprintf.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 15/25] arch/powerpc/cpu/mpc8xxx/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 16/25] powerpc/mpc85xx: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 17/25] powerpc/mpc83xx: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 18/25] drivers/block/: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 19/25] drivers/gpio/mpc83xx_gpio.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 20/25] drivers/input/input.c: sparse fix   Kim Phillips
• [U-Boot] [PATCH v2 21/25] drivers/mmc/mmc.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 22/25] drivers/mmc/fsl_esdhc.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 23/25] drivers/mtd/cfi_flash.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 24/25] drivers/mtd/nand: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 25/25] drivers/serial/serial_ns16550.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH] libfdt: introduce fdt type annotation for use by endian checkers   Kim Phillips
• [U-Boot] [PATCH] libfdt: introduce fdt type annotation for use by endian checkers   Kim Phillips
• [U-Boot] [PATCH] powerpc/mpc8xxx: take fdt_fixup_crypto_node() off the checkstack list   Kim Phillips
• [U-Boot] [PATCH] 8xxx: Change all 8*xx_DDR addresses to 8xxx   Kim Phillips
• [U-Boot] [PATCH v3] README: Add handy kermit primer   Karl O. Pinc
• [U-Boot] Custodians, Maintainers and old platforms   R, Sricharan
• [U-Boot] [u-boot] Adding missing CONFIG_SYS_CACHELINE_SIZE to boards definitions   Helmut Raiger
• [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx   Ashok Kumar Reddy
• [U-Boot] [PATCH] ARM: Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96   Ashok Kumar Reddy
• [U-Boot] [PATCH] README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96   Ashok Kumar Reddy
• [U-Boot] [PATCH] omap2424:Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 as CONFIG_DRIVER_LAN91C96 is obsolete.   Ashok Kumar Reddy
• [U-Boot] [PATCH v1] ARM : Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96   Ashok Kumar Reddy
• [U-Boot] [PATCH] tegra: move common features to a common makefile   Thierry Reding
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Thierry Reding
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Thierry Reding
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Stefan Reinauer
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Stefan Reinauer
• [U-Boot] [PATCH 07/15] x86: Add functions to access MSRs   Stefan Reinauer
• [U-Boot] [PATCH] powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR   Philippe Reynes
• [U-Boot] [PATCH 0/4] apf27: add support of armadeus apf27 v2   Philippe Reynes
• [U-Boot] [PATCH 1/4] apf27: add missing constant to mx27   Philippe Reynes
• [U-Boot] [PATCH 2/4] apf27: add support for the armadeus APF27 board   Philippe Reynes
• [U-Boot] [PATCH 3/4] apf27: add spl support for the apf27   Philippe Reynes
• [U-Boot] [PATCH 4/4] apf27: add FPGA support for the apf27 board   Philippe Reynes
• [U-Boot] [PATCH 2/2] mmc: Split device init to decouple OCR-polling delay   RgC
• [U-Boot] USB detection   RgC
• [U-Boot] Current u-boot memory mapping   RgC
• [U-Boot] Current u-boot memory mapping   RgC
• [U-Boot] v2012.10-rc2 tar balls on ftp   John Rigby
• [U-Boot] u-boot/master slight regression with trats   Tom Rini
• [U-Boot] [PATCH] AP1000: Inline local 'get_device'   Tom Rini
• [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c   Tom Rini
• [U-Boot] v2012.10-rc2 is now released   Tom Rini
• [U-Boot] Custodians, Maintainers and old platforms   Tom Rini
• [U-Boot] [PATCH 0/4] Keyboard input improvements   Tom Rini
• [U-Boot] [PATCH 2/2] spi: Add SPI flash test   Tom Rini
• [U-Boot] [PATCH] SPL: Remove setting GD_FLG_RELOC in preloader_console_init()   Tom Rini
• [U-Boot] v2012.10-rc2 is now released   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] AP1000: Inline local 'get_device'   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/next   Tom Rini
• [U-Boot] [PATCH 00/72 V3] serial: Massive rework of the serial subsystem   Tom Rini
• [U-Boot] [PULL] u-boot-testing / dm-stringify   Tom Rini
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Tom Rini
• [U-Boot] [U-Boot,1/2] openrisc/bitops: add hweightX defines   Tom Rini
• [U-Boot] openrisc: implement get_ticks and get_tbclk   Tom Rini
• [U-Boot] TQM8xx: adjust linker script to grown code size   Tom Rini
• [U-Boot] mpc52xx/motionpro: fix monitor size and update default environment   Tom Rini
• [U-Boot] [U-Boot,v3] README: Add handy kermit primer   Tom Rini
• [U-Boot] MAINTAINERS: New maintainer for Samsung's Trats development board.   Tom Rini
• [U-Boot] TNETV107X: Change tnetv107x_evm maintainer   Tom Rini
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   Tom Rini
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Tom Rini
• [U-Boot] v2012.10-rc2 tar balls on ftp   Tom Rini
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Tom Rini
• [U-Boot] mtest: Print dcache state   Tom Rini
• [U-Boot] [U-Boot, 4/6] gpt: Support for GPT (GUID Partition Table) restoration   Tom Rini
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Tom Rini
• [U-Boot] Allow runtime configuration of "zero-delay" check   Tom Rini
• [U-Boot] Change dead code in "test" cmd to debug output   Tom Rini
• [U-Boot] [U-Boot, 1/4] Implement verify option for sha1sum command   Tom Rini
• [U-Boot] [U-Boot, 1/2] Fix checkpatch.pl complaints in cmd_cache.c   Tom Rini
• [U-Boot] net: fix netconsole filtering   Tom Rini
• [U-Boot] [U-Boot,v2] Add a new "ini" command   Tom Rini
• [U-Boot] [U-Boot,v2] Add a command to access the system timer   Tom Rini
• [U-Boot] [U-Boot, v2] Output strings from echo with puts where easy   Tom Rini
• [U-Boot] [PATCH v2] ext4: Rename block group descriptor table from gd to bgd   Tom Rini
• [U-Boot] mtest: Print dcache state   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v1] env: fix crash using default -f -a   Tom Rini
• [U-Boot] [PATCH] MPC85xx: remove support for TQM85xx boards   Tom Rini
• [U-Boot] [PATCH] Sandbox: Add spi driver to sandbox   Tom Rini
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Tom Rini
• [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Tom Rini
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Tom Rini
• [U-Boot] [PATCH] env: fix crash using default -f -a   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] MPC85xx: remove support for TQM85xx boards   Tom Rini
• [U-Boot] [PATCH] Improve license declaration for cmd_ini.h   Tom Rini
• [U-Boot] [PATCH 1/3] Add nitrogen6x board   Tom Rini
• [U-Boot] [PATCH 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Tom Rini
• [U-Boot] [PATCH 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Tom Rini
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Tom Rini
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430 (was: [PATCH] yaffs2: Fix GCC 4.6 compile warnings)   Tom Rini
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Tom Rini
• [U-Boot] [PATCH 2/2] cm-t35: increase the MAXARGS   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430 (was: [PATCH] yaffs2: Fix GCC 4.6 compile warnings)   Tom Rini
• [U-Boot] fix IDE_BUS(dev) macro   Tom Rini
• [U-Boot] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Tom Rini
• [U-Boot] [U-Boot, 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Tom Rini
• [U-Boot] [U-Boot, 2/2] disk: part_dos: don't claim whole-disk FAT filesystems   Tom Rini
• [U-Boot] yaffs2: Fix GCC 4.6 compile warnings   Tom Rini
• [U-Boot] [U-Boot, V2] arm: armv7: omap3: Fix restore sequence in lowlevel_init   Tom Rini
• [U-Boot] v2012.10-rc3 is now released   Tom Rini
• [U-Boot] [PATCH V3] ARM: prevent misaligned array inits   Tom Rini
• [U-Boot] [PATCH 5/6] kerneldoc: Annotate drivers/serial/serial.c   Tom Rini
• [U-Boot] [PATCH 5/6] kerneldoc: Annotate drivers/serial/serial.c   Tom Rini
• [U-Boot] [PATCH 2/2] spi: Add SPI flash test   Tom Rini
• [U-Boot] [PATCH 08/10] split AU1X00 specific code from cmd_ide.c   Tom Rini
• [U-Boot] [PATCH 1/6] fdt: Check error codes returned from fdtlib when loading ITB   Tom Rini
• [U-Boot] sram overflowed   Tom Rini
• [U-Boot] [PULL] u-boot-usb/next   Tom Rini
• [U-Boot] sram overflowed   Tom Rini
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Tom Rini
• [U-Boot] [PATCH] fs: fat: Fix mkcksum() function parameters   Tom Rini
• [U-Boot] [PATCH v2 0/5] Cleanup fw_*env and a few common env   Tom Rini
• [U-Boot] [PATCH 0/4] Keyboard input improvements   Tom Rini
• [U-Boot] [PATCH v1 0/9] block: Fix some inconsistencies in block_{read, write} implementors   Tom Rini
• [U-Boot] patman: Support Series-name tag to name a series   Tom Rini
• [U-Boot] patman: Handle checkpatch.pl not providing file/line info   Tom Rini
• [U-Boot] add check infrastructure, default sparse   Tom Rini
• [U-Boot] MAKEALL: add a -C/--check option to enable build checking   Tom Rini
• [U-Boot] [U-Boot,v2] tools: Add cleanpatch   Tom Rini
• [U-Boot] common: cmd_bdinfo: fix type of value in print_lnum   Tom Rini
• [U-Boot] [PATCH v2 05/21] pmic: Introduce power_board_init() method at ./lib/board.c file   Tom Rini
• [U-Boot] [PATCH V4] ARM: prevent misaligned array inits   Tom Rini
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Tom Rini
• [U-Boot] [PATCH V4] ARM: prevent misaligned array inits   Tom Rini
• [U-Boot] U-Boot git usage model (was: Re: [PULL] u-boot-usb/next)   Tom Rini
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Tom Rini
• [U-Boot] Pull request: u-boot-arm/next into u-boot/next   Tom Rini
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Tom Rini
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Tom Rini
• [U-Boot] Pull request: u-boot-arm/next into u-boot/next   Tom Rini
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Tom Rini
• [U-Boot] KernelDoc   Tom Rini
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Tom Rini
• [U-Boot] U-Boot git usage model   Tom Rini
• [U-Boot] [PATCH 4/6] console & omap-common/spl: Enable use of eserial   Tom Rini
• [U-Boot] U-Boot git usage model (was: Re: [PULL] u-boot-usb/next)   Tom Rini
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] U-Boot git usage model   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Tom Rini
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Tom Rini
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Tom Rini
• [U-Boot] [ARM] [STATUS] ATTENTION: Uu-boot-arm/master branch ROLLBACK to 28e5ac2d   Tom Rini
• [U-Boot] U-Boot git usage model   Tom Rini
• [U-Boot] [PATCH 2/5] input: Provide a board specific mechanism to decide whether to skip i8042 init   Tom Rini
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Tom Rini
• [U-Boot] Reminder: v2012.10 on Monday   Tom Rini
• [U-Boot] File placement in Soc / board dirs and make issues (was: [PATCH V3 17/32] imximage.cfg: run files through C preprocessor)   Tom Rini
• [U-Boot] U-Boot git usage model   Tom Rini
• [U-Boot] File placement in Soc / board dirs and make issues   Tom Rini
• [U-Boot] [PATCH V6] [RESEND] ARM: prevent misaligned array inits   Tom Rini
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Tom Rini
• [U-Boot] U-Boot git usage model   Tom Rini
• [U-Boot] [PATCH] README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96   Tom Rini
• [U-Boot] [PATCH v1] ARM : Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96   Tom Rini
• [U-Boot] Add support for eco5-pk ARM board   Tom Rini
• [U-Boot] [PATCH V6] [RESEND] ARM: prevent misaligned array inits   Tom Rini
• [U-Boot] [STATUS] next moved into master   Tom Rini
• [U-Boot] Pull request: u-boot-staging/next   Tom Rini
• [U-Boot] tools/env: Fix build failure from missing header include   Tom Rini
• [U-Boot] config.mk:Update DBGFLAGS with dwarf information   Tom Rini
• [U-Boot] [PATCH] ZFS: fix some warnings, cleanup   Tom Rini
• [U-Boot] Patchwork status   Tom Rini
• [U-Boot] [PATCH v4 3/3] musb_udc : Fix compile warning.   Tom Rini
• [U-Boot] [PATCH 5/5] am33xx: support board specific ddr settings   Tom Rini
• [U-Boot] [PATCH 1/5] am33xx: move ti i2c baseboard header handling to board/ti/am335x/evm.{c, h}   Tom Rini
• [U-Boot] [PATCH 3/5] am33xx/board: use cpu_mmc_init() for default mmc initialization   Tom Rini
• [U-Boot] [PATCH 1/2] tools/env: Fix variable delete operation   Tom Rini
• [U-Boot] [PATCH 2/2] tools/env: Improve debug prints   Tom Rini
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Tom Rini
• [U-Boot] [PATCH 5/5] am33xx: support board specific ddr settings   Tom Rini
• [U-Boot] [PATCH 1/3] omap3_spi: Undo CONFIG_AM33XX D0/D1 change   Tom Rini
• [U-Boot] [PATCH 2/3] omapimage: Add support for byteswapped SPI images   Tom Rini
• [U-Boot] [PATCH 3/3] am33xx: Add SPI SPL as an option   Tom Rini
• [U-Boot] [PATCH 1/3] omap3_spi: Undo CONFIG_AM33XX D0/D1 change   Tom Rini
• [U-Boot] nds32: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT   Tom Rini
• [U-Boot] mpc82xx: Remove BMW board port   Tom Rini
• [U-Boot] [U-Boot,1/6] serial: Implement default_serial_puts()   Tom Rini
• [U-Boot] disk: get_device_and_partition() return value fixes   Tom Rini
• [U-Boot] [U-Boot, V2, 1/9] disk: part_efi: remove indent level from loop   Tom Rini
• [U-Boot] [U-Boot,01/10] remove CONFIG_SC3 from cmd_ide.c   Tom Rini
• [U-Boot] [U-Boot, V2] fs: fat: Fix mkcksum() function parameters   Tom Rini
• [U-Boot] [PATCH 3/3] am33xx: Add SPI SPL as an option   Tom Rini
• [U-Boot] [PATCH v2] USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY   Tom Rini
• [U-Boot] [PATCH] am33xx: Enable DDR3 for DDR3 version of beaglebone   Tom Rini
• [U-Boot] [PATCH] configs: Fix usage of mmc rescan   Tom Rini
• [U-Boot] [PATCH 1/2] cm-t35: clean unused defines from config   Tom Rini
• [U-Boot] [PATCH 1/5] am33xx: move ti i2c baseboard header handling to board/ti/am335x/evm.{c, h}   Tom Rini
• [U-Boot] [U-Boot, V2, 1/9] disk: part_efi: remove indent level from loop   Tom Rini
• [U-Boot] [PATCH V3 2/4] FAT: make use of disk_partition_t.part   Tom Rini
• [U-Boot] powerpc: delete Wind River SBC8560/8540 support   Tom Rini
• [U-Boot] [PATCH] actux[123]: Update linker script for ELDK 4.2   Tom Rini
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Tom Rini
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   Tom Rini
• [U-Boot] [PATCH v1 4/4] OMAP3: add video support to the mcx board   Tom Rini
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Tom Rini
• [U-Boot] [PATCH] am335x: Enable RTC 32K OSC clock   Tom Rini
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Tom Rini
• [U-Boot] [PATCH 0/2][RESEND] ColdFire: Fix the MAKEALL errors for some ColdFire boards   Tom Rini
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Tom Rini
• [U-Boot] [PATCH 08/32] arch/powerpc/lib/board.c, *traps.c: sparse fixes   Tom Rini
• [U-Boot] [PATCHv2 2/6] am33xx: move ti i2c baseboard header handling to board/ti/am335x/   Tom Rini
• [U-Boot] Uncompress error with LZO   Tom Rini
• [U-Boot] Uncompress error with LZO   Tom Rini
• [U-Boot] Compiling polarssl lib in uboot   Tom Rini
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Tom Rini
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] mpc82xx: Remove BMW board port   Tom Rini
• [U-Boot] Debugging (was: ARM : Removing unwind dummy functions)   Tom Rini
• [U-Boot] mpc82xx: Remove BMW board port   Tom Rini
• [U-Boot] Uncompress error with LZO   Tom Rini
• [U-Boot] Add support for eco5-pk ARM board   Tom Rini
• [U-Boot] Pull request: u-boot-coldfire/master   Tom Rini
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] Compiling polarssl lib in uboot   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] disk: initialize name/part fields when returning a whole disk   Tom Rini
• [U-Boot] disk: initialize name/part fields when returning a whole disk   Tom Rini
• [U-Boot] env: cosmetic: Consilidate the default env definition   Tom Rini
• [U-Boot] [U-Boot, v2] patman: force git log commands to not use color   Tom Rini
• [U-Boot] [PATCH 0/14] Homogenise baud rate type to unsigned int   Tom Rini
• [U-Boot] [PATCH 1/5] input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty   Tom Rini
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Tom Rini
• [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks   Tom Rini
• [U-Boot] [PATCH v2 1/2] SPL: make jump_to_image_no_args a weak symbol   Tom Rini
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Tom Rini
• [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks   Tom Rini
• [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Tom Rini
• [U-Boot] [PATCH 0/2] eco5pk: Add support for the eco5pk ARM board   Tom Rini
• [U-Boot] [PATCH V3 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Tom Rini
• [U-Boot] [PATCH 7/7] config: Enable CBFS, ext4 for coreboot   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 1/6 V5] common: Add symbol handling for generic lists into Makefile   Tom Rini
• [U-Boot] [PATCH 1/7] ide: Add printf format string for CONFIG_SYS_64BIT_LBA option   Tom Rini
• [U-Boot] [PATCH v1] ARM : Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96   Tom Rini
• [U-Boot] [PATCH] README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96   Tom Rini
• [U-Boot] [PATCH] omap2424:Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 as CONFIG_DRIVER_LAN91C96 is obsolete.   Tom Rini
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] Please pull u-boot-mmc.git   Tom Rini
• [U-Boot] [fdt] Pull request   Tom Rini
• [U-Boot] [PATCH v5 0/7] SPL: Port SPL framework to powerpc   Tom Rini
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Tom Rini
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Tom Rini
• [U-Boot] [PATCH] nand_spl: Define nand_select function   Tom Rini
• [U-Boot] [PATCH] nand_spl: Define nand_select function   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Tom Rini
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mpc83xx: add support for the mpc8309 and the kmvect1 board   Tom Rini
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Tom Rini
• [U-Boot] [PATCHv2 0/6] am33xx: support non-ti boards   Tom Rini
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Tom Rini
• [U-Boot] [PATCH 1/2] README: Document CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG   Tom Rini
• [U-Boot] [PATCH 2/2] am335x_evm: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Tom Rini
• [U-Boot] Pull request: u-boot-coldfire/master   Tom Rini
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Tom Rini
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Tom Rini
• [U-Boot] [PATCH v3 4/4] am335x_evm: Enable use of UART{1, 2, 3, 4, 5}   Tom Rini
• [U-Boot] [PATCH 2/2] am335x_evm: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Tom Rini
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Tom Rini
• [U-Boot] [PATCH 02/32] include/linux/compat.h: fix warning: preprocessor token __iomem redefined   Tom Rini
• [U-Boot] [PATCH 12/32] common/cmd_*.c: sparse fixes   Tom Rini
• [U-Boot] [PATCH 10/32] include/command.h: sparse fix   Tom Rini
• [U-Boot] [PATCH 13/32] common/misc: sparse fixes   Tom Rini
• [U-Boot] [PATCH 01/32] include/linux/byteorder: import latest endian definitions from linux   Tom Rini
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Tom Rini
• [U-Boot] [PATCH] MAKEALL: Add -s to '${MAKE} tidy' section   Tom Rini
• [U-Boot] [PATCH] common/cmd_ext_common: measure throughput   Tom Rini
• [U-Boot] [PATCH 00/32] Initial sparse fix series   Tom Rini
• [U-Boot] [U-Boot, 2/6] fdt: Limit printed hex in fdt print and list commands   Tom Rini
• [U-Boot] [U-Boot,3/6] fdt: Add get commands to fdt   Tom Rini
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Tom Rini
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Tom Rini
• [U-Boot] [PATCH V4 1/3] FAT: remove cur_part_nr   Tom Rini
• [U-Boot] [U-Boot,27/32] drivers/i2c/fsl_i2c.c: sparse fix   Tom Rini
• [U-Boot] [U-Boot, 32/32] drivers/serial/serial_ns16550.c: sparse fixes   Tom Rini
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Tom Rini
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Tom Rini
• [U-Boot] [PATCH v3 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Tom Rini
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Tom Rini
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Tom Rini
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Tom Rini
• [U-Boot] [PATCH 0/20] AHCI / SATA Improvements   Tom Rini
• [U-Boot] [PATCH v3 08/24] pmic: Move pmic related code to ./drivers/power directory   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Pull request:u-boot-coldfire/master   Tom Rini
• [U-Boot] Pull request: u-boot-mpc8xx/master   Tom Rini
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Tom Rini
• [U-Boot] Current u-boot memory mapping   Tom Rini
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Tom Rini
• [U-Boot] [PATCH v3 21/22] ide: Correct function signatures for ide_read/write()   Tom Rini
• [U-Boot] [PATCH v5 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Tom Rini
• [U-Boot] [PATCH V4 1/3] fs: delete unused Makefile   Tom Rini
• [U-Boot] [PATCH] FPGA: Cyclon II: Correctly reset the FPGA before configuration   Tom Rini
• [U-Boot] [PATCH] ext4: Fix printf() format string error   Tom Rini
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Tom Rini
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Tom Rini
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl   Tom Rini
• [U-Boot] Linker errors from .u_boot_list in powerpc   Tom Rini
• [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Tom Rini
• [U-Boot] [PATCH v4 08/24] pmic: Move pmic related code to ./drivers/power directory   Tom Rini
• [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl   Tom Rini
• [U-Boot] Custodian branch base commits   Tom Rini
• [U-Boot] x86: Anyone willing to take over the reigns   Tom Rini
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Tom Rini
• [U-Boot] [PATCH] fs/fs.c: fix fs_set_blk_dev() for manual relocation   Tom Rini
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Tom Rini
• [U-Boot] [PATCH v4 08/24] pmic: Move pmic related code to ./drivers/power directory   Tom Rini
• [U-Boot] [PATCH v1 2/8] am335x_evm: add nand pinmux definition   Tom Rini
• [U-Boot] [PATCH v1 3/8] am33xx: NAND support   Tom Rini
• [U-Boot] [PATCH v1 4/8] am335x_evm: enable NAND support   Tom Rini
• [U-Boot] [PATCH v1 5/8] am33xx: add ELM support   Tom Rini
• [U-Boot] [PATCH v1 7/8] am33xx_spl_bch: simple SPL nand loader for AM33XX   Tom Rini
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Tom Rini
• [U-Boot] [PATCH] omap3: Rework board.c for !CONFIG_SYS_L2CACHE_OFF   Tom Rini
• [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Tom Rini
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Tom Rini
• [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Tom Rini
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"   Stefan Roese
• [U-Boot] [PATCH] AP1000: Inline local 'get_device'   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"   Stefan Roese
• [U-Boot] [PATCH] MPC85xx: remove support for TQM85xx boards   Stefan Roese
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v4 0/7] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v4 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH v4 2/7] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v4 3/7] env: Enable getenv_f() for SPL_BUILD   Stefan Roese
• [U-Boot] [PATCH v4 4/7] mpc5200: Add SPL support   Stefan Roese
• [U-Boot] [PATCH v4 5/7] mpc5200: Add a3m071 board support   Stefan Roese
• [U-Boot] [PATCH v4 6/7] Makefile: Add possibility to set entry-point for u-boot.img   Stefan Roese
• [U-Boot] [PATCH v4 7/7] Makefile: Add target for combined spl/u-boot.bin & u-boot.img   Stefan Roese
• [U-Boot] U-Boot git usage model   Stefan Roese
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Stefan Roese
• [U-Boot] [PATCH v5 0/7] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v5 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH v5 2/7] SPL: Port SPL framework to powerpc   Stefan Roese
• [U-Boot] [PATCH v5 3/7] env: Enable getenv_f() for SPL_BUILD   Stefan Roese
• [U-Boot] [PATCH v5 4/7] mpc5200: Add SPL support   Stefan Roese
• [U-Boot] [PATCH v5 5/7] mpc5200: Add a3m071 board support   Stefan Roese
• [U-Boot] [PATCH v5 6/7] Makefile: Add possibility to set entry-point for u-boot.img   Stefan Roese
• [U-Boot] [PATCH v5 7/7] Makefile: Add target for combined spl/u-boot.bin & u-boot.img   Stefan Roese
• [U-Boot] [PATCH] FPGA: Cyclon II: Correctly reset the FPGA before configuration   Stefan Roese
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Stefan Roese
• [U-Boot] [PATCH v2] common/spl: Mark arguments as unused   Stefan Roese
• [U-Boot] [PATCH 1/2] ZFS: Fix compile warning in cmd_zfs.c (GCC 4.6.4 from ELDK 5.2.1)   Stefan Roese
• [U-Boot] [PATCH 2/2] ZFS: Fix compile warning in fs/zfs/zfs.c (GCC 4.6.4 from ELDK 5.2.1)   Stefan Roese
• [U-Boot] [PATCH v5 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Stefan Roese
• [U-Boot] [PATCH] patman: Issue empty change logs for unchanged patches   Stefan Roese
• [U-Boot] [PATCH v3 0/5] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH v3 1/5] arm bootm: Allow to pass board specified atags   Pali Rohár
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Pali Rohár
• [U-Boot] [PATCH v3 4/5] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v3 1/5] arm bootm: Allow to pass board specified atags   Pali Rohár
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Pali Rohár
• [U-Boot] [PATCH v3 4/5] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Pali Rohár
• [U-Boot] [PATCH v3 1/5] arm bootm: Allow to pass board specified atags   Pali Rohár
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v4 0/5] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH v4 1/5] arm bootm: Allow to pass board specified atags   Pali Rohár
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v4 3/5] Add power bus message definitions in twl4030.h   Pali Rohár
• [U-Boot] [PATCH v4 4/5] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH v4 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Pali Rohár
• [U-Boot] [PATCH v4 4/5] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH v5 4/5] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH v5 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH v4 5/5] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Måns Rullgård
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Graeme Russ
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Graeme Russ
• [U-Boot] [PATCH 1/2] ext4: Rename block group descriptor table from gd to bgd   Graeme Russ
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Graeme Russ
• [U-Boot] [PATCH 5/9] x86: coreboot: Move non-board specific files to coreboot arch directory   Graeme Russ
• [U-Boot] [PATCH 5/9] x86: coreboot: Move non-board specific files to coreboot arch directory   Graeme Russ
• [U-Boot] Future direction of the x86 architecture in U-Boot   Graeme Russ
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Graeme Russ
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Graeme Russ
• [U-Boot] U-Boot git usage model   Graeme Russ
• [U-Boot] U-Boot git usage model   Graeme Russ
• [U-Boot] [PATCH 3/9] x86: Allow excluding reset handling code from u-boot.   Graeme Russ
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Graeme Russ
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Graeme Russ
• [U-Boot] [PATCH v2 02/10] x86: Add initial memory barrier macros   Graeme Russ
• [U-Boot] [PATCH v2 03/10] x86: Allow excluding reset vector code from u-boot   Graeme Russ
• [U-Boot] [PATCH v2 04/10] x86: Add some missing includes.   Graeme Russ
• [U-Boot] [PATCH v2 05/10] x86: coreboot: Move non-board specific files to coreboot arch directory   Graeme Russ
• [U-Boot] [PATCH v2 06/10] x86: coreboot: Tell u-boot about PCI bus 0 when initializing   Graeme Russ
• [U-Boot] [PATCH v2 07/10] x86: coreboot: Modify u-boot code to allow building coreboot payload   Graeme Russ
• [U-Boot] [PATCH v2 08/10] x86: coreboot: Implement recursively scanning PCI busses   Graeme Russ
• [U-Boot] [PATCH v2 09/10] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Graeme Russ
• [U-Boot] [PATCH v2 10/10] x86: Remove coreboot start16 code   Graeme Russ
• [U-Boot] [PATCH v2 09/10] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Graeme Russ
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Graeme Russ
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Graeme Russ
• [U-Boot] [PATCH v2 01/10] x86: Change board baud_rate to ulong   Graeme Russ
• [U-Boot] [PATCH 1/5] input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty   Graeme Russ
• [U-Boot] [PATCH] Prevent malloc with size 0   Graeme Russ
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Graeme Russ
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Graeme Russ
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Graeme Russ
• [U-Boot] [PATCH 2/3] x86: Enable ICH6 GPIO controller for coreboot   Graeme Russ
• [U-Boot] U-Boot / Coreboot integration   Graeme Russ
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Graeme Russ
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Graeme Russ
• [U-Boot] U-Boot / Coreboot integration   Graeme Russ
• [U-Boot] U-Boot / Coreboot integration   Graeme Russ
• [U-Boot] [PATCH 01/15] x86: Add function to read time stamp counter   Graeme Russ
• [U-Boot] [PATCH 07/15] x86: Add functions to access MSRs   Graeme Russ
• [U-Boot] [PATCH 05/15] x86: Add basic cache operations   Graeme Russ
• [U-Boot] [PATCH 09/15] x86: Fix indirect jmp warning in zimage.c   Graeme Russ
• [U-Boot] [PATCH 07/15] x86: Add functions to access MSRs   Graeme Russ
• [U-Boot] [PATCH v9] [RFC] Add dmmalloc module for DM.   Graeme Russ
• [U-Boot] [PATCH v9] [RFC] Add dmmalloc module for DM.   Graeme Russ
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Graeme Russ
• [U-Boot] x86: Anyone willing to take over the reigns   Graeme Russ
• [U-Boot] x86: Anyone willing to take over the reigns   Graeme Russ
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Hatim Rv
• [U-Boot] [PATCH 2/6 V5] EXYNOS: Add clock for SPI.   Hatim Rv
• [U-Boot] [PATCH] mx6qsabreauto: Change mmcroot so it works out of box   Otavio Salvador
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   Otavio Salvador
• [U-Boot] [PATCH V3 27/32] mx6qsabrelite: add support for mx6 solo/duallite   Otavio Salvador
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Otavio Salvador
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Otavio Salvador
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Otavio Salvador
• [U-Boot] [PATCH v3 00/10] i2c for R-mobile   Heiko Schocher
• [U-Boot] [PATCH] common/i2c: Add i2c write command   Heiko Schocher
• [U-Boot] [PATCH] i2c_probe: update for use in scripting   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH 27/32] drivers/i2c/fsl_i2c.c: sparse fix   Heiko Schocher
• [U-Boot] [PATCH v2 0/9] arm:exynos4: Enable Multi I2C   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
• [U-Boot] [PATCH 2/3] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH 3/3] i2c, soft-i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH 2/3] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH 1/2] tegra: i2c: Add function to know about current bus   Heiko Schocher
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] Multiple stdin/out without CONFIG_CONSOLE_MUX?   Andre Schwarz
• [U-Boot] include: fix mips64 build warning   Daniel Schwierzeck
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Daniel Schwierzeck
• [U-Boot] [PATCH 5/5] common: Discard the __u_boot_cmd section   Daniel Schwierzeck
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Daniel Schwierzeck
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Daniel Schwierzeck
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Daniel Schwierzeck
• [U-Boot] Problem with first use of patman   Daniel Schwierzeck
• [U-Boot] Problem with first use of patman   Daniel Schwierzeck
• [U-Boot] [PATCH 1/6 V3] common: Add symbol handling for generic lists into Makefile   Daniel Schwierzeck
• [U-Boot] [PATCH 1/6 V3] common: Add symbol handling for generic lists into Makefile   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH] arm: rmobile: bugfix: wrong register saving in lowlevel_init   Enric Balletbò i Serra
• [U-Boot] [PATCH] OMAP3: igep0020: Add pad config for WIFI/BT GPIOs   Enric Balletbo Serra
• [U-Boot] [PATCH] OMAP3: igep0020: Add pad config for WIFI/BT GPIOs   Enric Balletbo Serra
• [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings   Xie Shaohui-B21989
• [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings   Xie Shaohui-B21989
• [U-Boot] [PATCH] video: atmel: implement lcd_setcolreg funtion   Bo Shen
• [U-Boot] [RFC] common/lcd: use lcd_setcolreg() in bitmap_plot   Bo Shen
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Joonyoung Shim
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Joonyoung Shim
• [U-Boot] [PATCH 0/9 V3] EXYNOS5: Add Audio support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/9 V3] SOUND: SAMSUNG: Add I2S driver   Rajeshwari Shinde
• [U-Boot] [PATCH 2/9 V3] SOUND: Add WM8994 codec   Rajeshwari Shinde
• [U-Boot] [PATCH 3/9 V3] Sound: Add command for audio playback   Rajeshwari Shinde
• [U-Boot] [PATCH 4/9 V3] EXYNOS: Add I2S registers   Rajeshwari Shinde
• [U-Boot] [PATCH 5/9 V3] EXYNOS: Add parameters required by I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 6/9 V3] EXYNOS: Add pinmux for I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 7/9 V3] EXYNOS: Add I2S base address   Rajeshwari Shinde
• [U-Boot] [PATCH 8/9 V3] EXYNOS: Add clock for I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 9/9 V3] SMDK5250: Enable Sound   Rajeshwari Shinde
• [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver   Rajeshwari Shinde
• [U-Boot] [PATCH 2/9 V4] SOUND: Add WM8994 codec   Rajeshwari Shinde
• [U-Boot] [PATCH 3/9 V4] Sound: Add command for audio playback   Rajeshwari Shinde
• [U-Boot] [PATCH 4/9 V4] EXYNOS: Add I2S registers   Rajeshwari Shinde
• [U-Boot] [PATCH 5/9 V4] EXYNOS: Add parameters required by I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 6/9 V4] EXYNOS: Add pinmux for I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 7/9 V4] EXYNOS: Add I2S base address   Rajeshwari Shinde
• [U-Boot] [PATCH 8/9 V4] EXYNOS: Add clock for I2S   Rajeshwari Shinde
• [U-Boot] [PATCH 9/9 V4] SMDK5250: Enable Sound   Rajeshwari Shinde
• [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c   Michal Simek
• [U-Boot] [PATCH] sf: spansion: Correct the first byte of idcode1 for S25FL256S part   Michal Simek
• [U-Boot] [PATCH] sf: winbond: Add support for W25Q64DW   Michal Simek
• [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Michal Simek
• [U-Boot] [PATCH 2/4] microblaze: Fix byteorder for microblaze   Michal Simek
• [U-Boot] [PATCH 3/4] microblaze: Flush caches before enabling them   Michal Simek
• [U-Boot] [PATCH 4/4] microblaze: Fix compilation failure because of missing libdts   Michal Simek
• [U-Boot] ELDK4.2 build failures for highbank, omap4_panda and omap4_sdp4430   R Sricharan
• [U-Boot] [PATCH v5 09/16] arm: Add control over cachability of memory regions   R Sricharan
• [U-Boot] [PATCH v4 1/2] usb: ulpi: add indicator configuration function   Lucas Stach
• [U-Boot] [PATCH v4 2/2] tegra20: add USB ULPI init code   Lucas Stach
• [U-Boot] Tegra USB driver movement   Lucas Stach
• [U-Boot] Tegra USB driver movement   Lucas Stach
• [U-Boot] [PATCH v2] tegra: add Colibri T20 board support   Lucas Stach
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Lucas Stach
• [U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files   Lucas Stach
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Lucas Stach
• [U-Boot] [PATCH v2] tegra: nand: make ONFI detection work   Lucas Stach
• [U-Boot] [PATCH v3] tegra: add Colibri T20 board support   Lucas Stach
• [U-Boot] [PATCH v3] tegra: add Colibri T20 board support   Lucas Stach
• [U-Boot] [PATCH v2] tegra: nand: make ONFI detection work   Lucas Stach
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Lucas Stach
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Lucas Stach
• [U-Boot] [PATCH] usb: tegra: move Tegra EHCI implementation to correct place   Lucas Stach
• [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Lucas Stach
• [U-Boot] [PATCH] usb: tegra: move Tegra EHCI implementation to correct place   Lucas Stach
• [U-Boot] [PATCH 1/8] tegra: usb: convert USB_PORTS_MAX to be a define   Lucas Stach
• [U-Boot] [PATCH 2/8] tegra: usb: make controller init functions more self contained   Lucas Stach
• [U-Boot] [PATCH 3/8] tegra: usb: fold initial pll setup into board_usb_init   Lucas Stach
• [U-Boot] [PATCH 4/8] tegra: usb: remove unneeded function parameter   Lucas Stach
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Lucas Stach
• [U-Boot] [PATCH 6/8] tegra: usb: various small cleanups   Lucas Stach
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Lucas Stach
• [U-Boot] [PATCH 8/8] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]   Lucas Stach
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Lucas Stach
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Lucas Stach
• [U-Boot] [PATCH 2/8] tegra: usb: make controller init functions more self contained   Lucas Stach
• [U-Boot] [PATCH 3/8] tegra: usb: fold initial pll setup into board_usb_init   Lucas Stach
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Lucas Stach
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Lucas Stach
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Lucas Stach
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Lucas Stach
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Lucas Stach
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Lucas Stach
• [U-Boot] Host driver for ISP1362?   Steve Strobel
• [U-Boot] Host driver for ISP1362?   Steve Strobel
• [U-Boot] USB Host driver for ISP1362?   Steve Strobel
• [U-Boot] USB Host driver for ISP1362?   Steve Strobel
• [U-Boot] USB Host driver for ISP1362?   Steve Strobel
• [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error   York Sun
• [U-Boot] [PATCH 02/28] powerpc/DPAA: Fix compiling error   York Sun
• [U-Boot] [PATCH 03/28] powerpc/85xx: Add determining and report IFC frequency   York Sun
• [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries   York Sun
• [U-Boot] [PATCH 05/28] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500   York Sun
• [U-Boot] [PATCH 06/28] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2   York Sun
• [U-Boot] [PATCH 07/28] powerpc/mpc85xx: check number of cores   York Sun
• [U-Boot] [PATCH 08/28] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2   York Sun
• [U-Boot] [PATCH 09/28] powerpc/mpc85xx: expand SERDES reference clock select bit   York Sun
• [U-Boot] [PATCH 10/28] powerpc/e6500: Move QCSP registers for QMan v3   York Sun
• [U-Boot] [PATCH 11/28] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2   York Sun
• [U-Boot] [PATCH 12/28] powerpc/corenet2: Add SerDes for corenet2   York Sun
• [U-Boot] [PATCH 13/28] powerpc/corenet2: fix mismatch DDR sync bit from RCW   York Sun
• [U-Boot] [PATCH 14/28] board/freescale/common: VSC3316/VSC3308 initialization code   York Sun
• [U-Boot] [PATCH 15/28] powerpc/mpc85xx: Add T4 device definitions   York Sun
• [U-Boot] [PATCH 16/28] powerpc/mpc85xx: Add T4240 SoC   York Sun
• [U-Boot] [PATCH 17/28] powerpc/mpc85xx: Add B4860 and variant SoCs   York Sun
• [U-Boot] [PATCH 18/28] fm/mEMAC: add mEMAC frame work   York Sun
• [U-Boot] [PATCH 19/28] powerpc/mpc8xxx: Update DDR registers   York Sun
• [U-Boot] [PATCH 20/28] powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculation   York Sun
• [U-Boot] [PATCH 21/28] powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT   York Sun
• [U-Boot] [PATCH 22/28] powerpc/mpc85xx: software workaround for DDR erratum A-004468   York Sun
• [U-Boot] [PATCH 23/28] powerpc/mpc85xx: Add workaround for DDR erratum A004934   York Sun
• [U-Boot] [PATCH 24/28] powerpc/mpc8xxx: Add auto select bank interleaving mode   York Sun
• [U-Boot] [PATCH 25/28] powerpc/mpc8xxx: Fix DDR SPD failed message   York Sun
• [U-Boot] [PATCH 26/28] powerpc/mpc85xx: Remove R6 from spin table   York Sun
• [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1   York Sun
• [U-Boot] [PATCH 28/28] powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform   York Sun
• [U-Boot] [PATCH 1/4] powerpc/t4qds: Add T4QDS board   York Sun
• [U-Boot] [PATCH 2/4] mpc85xx/portals: Add qman and bman ip_cfg field into portal info   York Sun
• [U-Boot] [PATCH 3/4] poweprc/85xx: add QMan frequency info and fdt fixup.   York Sun
• [U-Boot] [PATCH 4/4] powerpc/b4860qds: Add B4860QDS board   York Sun
• [U-Boot] [PATCH] powerpc/qoriq: Move FMAN microcode location   York Sun
• [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix compiling error   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Temporary fix for spin table backward compatibility   York Sun
• [U-Boot] [PATCH] powerpc/corenet_ds: Update DDR timing for single-rank DIMMs   York Sun
• [U-Boot] [PATCH] powerpc/P2041RDB: Fix Flash address LAW address   York Sun
• [U-Boot] [PATCH v2] powerpc/mpc85xx: Temporary fix for spin table backward compatibility   York Sun
• [U-Boot] help with archos g9 "port"   SxDx
• [U-Boot] [PATCH 1/6] powerpc/mpc85xx: fix Unicode characters in release.S   Timur Tabi
• [U-Boot] [PATCH 2/6] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs   Timur Tabi
• [U-Boot] [PATCH 3/6] powerpc/85xx: move SRIO configuration out of corenet_ds.h   Timur Tabi
• [U-Boot] [PATCH 4/6] [v2] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH 5/6] powerpc/p5040ds: add per pci endpoint liodn offset list   Timur Tabi
• [U-Boot] [PATCH 6/6] [v2] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board   Timur Tabi
• [U-Boot] [u-boot-release] [RFC PATCH 17/17] ns16550: wait for TENT before initializing   Timur Tabi
• [U-Boot] [PATCH 4/6] [v2] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH 1/7] powerpc/mpc85xx: fix Unicode characters in release.S   Timur Tabi
• [U-Boot] [PATCH 2/7] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs   Timur Tabi
• [U-Boot] [PATCH 3/7] powerpc/85xx: define SRIO LIODN functions only if SRIO is defined   Timur Tabi
• [U-Boot] [PATCH 4/7] powerpc/85xx: move SRIO configuration out of corenet_ds.h   Timur Tabi
• [U-Boot] [PATCH 5/7] powerpc/p5040ds: add per pci endpoint liodn offset list   Timur Tabi
• [U-Boot] [PATCH 6/7] [v3] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH 7/7] [v3] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board   Timur Tabi
• [U-Boot] [PATCH 6/7] [v4] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH 6/7] [v4] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH 6/7] [v5] powerpc/85xx: Add P5040 processor support   Timur Tabi
• [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings   Timur Tabi
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] [v4] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board   Timur Tabi
• [U-Boot] [PATCH] powerpc/85xx/p5040: add CONFIG_SYS_PPC64, del CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC   Timur Tabi
• [U-Boot] [PATCH] powerpc/85xx: implement check for erratum A-004849 work-around   Timur Tabi
• [U-Boot] [PATCH v2] mxc: Fix SDHC multi-instance clock   Benoît Thébaudeau
• [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init   Benoît Thébaudeau
• [U-Boot] mtest: Print dcache state   Benoît Thébaudeau
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Benoît Thébaudeau
• [U-Boot] [PATCH v2] arm1136: Fix enable_caches()   Benoît Thébaudeau
• [U-Boot] [PATCH] arm1136: cosmetic: Remove double test on CONFIG_SYS_DCACHE_OFF   Benoît Thébaudeau
• [U-Boot] [PATCH] mx25: Clean up imx-regs.h   Benoît Thébaudeau
• [U-Boot] [PATCH 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Benoît Thébaudeau
• [U-Boot] [PATCH v2] mxc: Fix SDHC multi-instance clock   Benoît Thébaudeau
• [U-Boot] [PATCH V2 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Benoît Thébaudeau
• [U-Boot] [PATCH] disk: initialize name/part fields when returning a whole disk   Benoît Thébaudeau
• [U-Boot] [PATCH V3 4/4] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Benoît Thébaudeau
• [U-Boot] I2C on mx25   Benoît Thébaudeau
• [U-Boot] [PATCH 2/3] mx25pdk: Add esdhc support   Benoît Thébaudeau
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Benoît Thébaudeau
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Benoît Thébaudeau
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Benoît Thébaudeau
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Benoît Thébaudeau
• [U-Boot] [PATCH V4 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Benoît Thébaudeau
• [U-Boot] fat: Handle moved FAT32 root directory   Benoît Thébaudeau
• [U-Boot] u-boot nand suppoort for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Benoît Thébaudeau
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Benoît Thébaudeau
• [U-Boot] [PATCH 1/3] fs: fix do_fsload() handling of optional arguments   Benoît Thébaudeau
• [U-Boot] [PATCH v2] arm1136: Fix enable_caches()   Benoît Thébaudeau
• [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings   Tabi Timur-B04825
• [U-Boot] Please pull u-boot-mpc85xx.git   Tabi Timur-B04825
• [U-Boot] [PATCH v2 22/22] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot   Tabi Timur-B04825
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Joakim Tjernlund
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Joakim Tjernlund
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Joakim Tjernlund
• [U-Boot] [PATCH] Prevent malloc with size 0   Joakim Tjernlund
• [U-Boot] [PATCH] Prevent malloc with size 0   Joakim Tjernlund
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Greg Topmiller
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Greg Topmiller
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Oleksandr Tymoshenko
• [U-Boot] [PATCH v4 2/2] tegra20: add USB ULPI init code   Marek Vasut
• [U-Boot] [PATCH] tpm: Remove the LPC TPM driver   Marek Vasut
• [U-Boot] Tegra USB driver movement   Marek Vasut
• [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx   Marek Vasut
• [U-Boot] KernelDoc   Marek Vasut
• [U-Boot] KernelDoc   Marek Vasut
• [U-Boot] Custodians, Maintainers and old platforms   Marek Vasut
• [U-Boot] [PATCH 39/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver   Marek Vasut
• [U-Boot] [PATCH 39/72 V2] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver   Marek Vasut
• [U-Boot] [PATCH 40/72 V2] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver   Marek Vasut
• [U-Boot] [PATCH 40/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver   Marek Vasut
• [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c   Marek Vasut
• [U-Boot] [PATCH] TQM8xx: adjust linker script to grown code size   Marek Vasut
• [U-Boot] [PATCH 25/72 V2] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers   Marek Vasut
• [U-Boot] [PATCH 70/72 V2] serial: Remove CONFIG_SERIAL_MULTI from remaining sources   Marek Vasut
• [U-Boot] [PATCH 23/72 V2] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver   Marek Vasut
• [U-Boot] [PATCH 39/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver   Marek Vasut
• [U-Boot] Has anyone gotten the mmc commands to work on the NOVSOMTMi.MX6Q-SL-1-D, on the NOVPEK board by Novtech?   Marek Vasut
• [U-Boot] [PATCH v4 1/8] h2200: Add support for iPAQ h2200 palmtop   Marek Vasut
• [U-Boot] [PATCH v4 2/8] pxa: Add some stuff to examine cpu model and rev   Marek Vasut
• [U-Boot] [PATCH v4 1/8] h2200: Add support for iPAQ h2200 palmtop   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa/next   Marek Vasut
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH] AP1000: Inline local 'get_device'   Marek Vasut
• [U-Boot] Please pull u-boot-ppc4xx/next   Marek Vasut
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Marek Vasut
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] Fwd: [PULL] u-boot-pxa/next   Marek Vasut
• [U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Marek Vasut
• [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: Remove support for lpc2292   Marek Vasut
• [U-Boot] [PATCH 2/6] arm: Remove support for s3c4510   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: Remove support for NETARM   Marek Vasut
• [U-Boot] [PATCH 4/6] stdio: Remove the CLPS7111 serial driver   Marek Vasut
• [U-Boot] [PATCH 5/6] arm720: Further clean up the arm720t directory   Marek Vasut
• [U-Boot] [PATCH 6/6] arm720: Remove CONFIG_ARM7_REVD   Marek Vasut
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH v3 1/6] arm: Remove support for lpc2292   Marek Vasut
• [U-Boot] [PATCH v3 2/6] arm: Remove support for s3c4510   Marek Vasut
• [U-Boot] [PATCH v3 3/6] arm: Remove support for NETARM   Marek Vasut
• [U-Boot] [PATCH v3 4/6] stdio: Remove the CLPS7111 serial driver   Marek Vasut
• [U-Boot] [PATCH v3 5/6] arm720: Further clean up the arm720t directory   Marek Vasut
• [U-Boot] [PATCH v3 6/6] arm720: Remove CONFIG_ARM7_REVD   Marek Vasut
• [U-Boot] [PATCH v3 1/6] arm: Remove support for lpc2292   Marek Vasut
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH 3/5 V2] common: Add .u_boot_list into all linker files   Marek Vasut
• [U-Boot] [PATCH 5/5 V2] common: Discard the __u_boot_cmd section   Marek Vasut
• [U-Boot] [PATCH] u-boot yaffs2: Fix compilation warnings   Marek Vasut
• [U-Boot] [PATCH v6] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH 0/6] m68k: Fixes for the m68k   Marek Vasut
• [U-Boot] [PATCH 1/6] m68k: Fix relocation errors in start.S   Marek Vasut
• [U-Boot] [PATCH 2/6] m68k: Fix wrong assembler instruction in start.S   Marek Vasut
• [U-Boot] [PATCH 3/6] m68k: Fix unused variable warning   Marek Vasut
• [U-Boot] [PATCH 4/6] m68k: Fix unused variable warning in speed.c   Marek Vasut
• [U-Boot] [PATCH 5/6] m68k: Fix unused variable in board.c   Marek Vasut
• [U-Boot] [PATCH 6/6] m68k: net: Fix unused variable in mcfmii.c   Marek Vasut
• [U-Boot] [PATCH v7] h2200: Add USB CDC ethernet support   Marek Vasut
• [U-Boot] [PATCH] tpm: Remove the LPC TPM driver   Marek Vasut
• [U-Boot] [PATCH 00/72 V3] serial: Massive rework of the serial subsystem   Marek Vasut
• [U-Boot] Please pull u-boot-ppc4xx/next   Marek Vasut
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Marek Vasut
• [U-Boot] [PATCH 2/4] microblaze: Fix byteorder for microblaze   Marek Vasut
• [U-Boot] [PATCH 3/4] microblaze: Flush caches before enabling them   Marek Vasut
• [U-Boot] [PATCH 4/4] microblaze: Fix compilation failure because of missing libdts   Marek Vasut
• [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 2/4 V3] kerneldoc: Add nicer CSS stylesheet for HTML docs   Marek Vasut
• [U-Boot] [PATCH 3/4 V3] kerneldoc: Implement "Example" section handling   Marek Vasut
• [U-Boot] [PATCH 4/4 V3] kerneldoc: Add myself to the git-mailrc for kerneldoc   Marek Vasut
• [U-Boot] [PATCH 0/6 V2] Linker-generated arrays (take 2)   Marek Vasut
• [U-Boot] [PATCH 1/6 V2] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 2/6 V2] common: Implement support for linker-generated arrays   Marek Vasut
• [U-Boot] [PATCH 3/6 V2] common: Add .u_boot_list into all linker files   Marek Vasut
• [U-Boot] [PATCH 4/6 V2] common: Convert the U-Boot commands to LG-arrays   Marek Vasut
• [U-Boot] [PATCH 5/6 V2] common: Discard the __u_boot_cmd section   Marek Vasut
• [U-Boot] [PATCH 6/6 V2] kerneldoc: tmpl: Implement template for LG-arrays   Marek Vasut
• [U-Boot] [PATCH 0/6] Serial cleanup series   Marek Vasut
• [U-Boot] [PATCH 1/6] serial: Implement default_serial_puts()   Marek Vasut
• [U-Boot] [PATCH 2/6] serial: Use default_serial_puts() in drivers   Marek Vasut
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Marek Vasut
• [U-Boot] [PATCH 4/6] serial: Reorder get_current()   Marek Vasut
• [U-Boot] [PATCH 5/6] kerneldoc: Annotate drivers/serial/serial.c   Marek Vasut
• [U-Boot] [PATCH 6/6] kerneldoc: stdio: tmpl: Add stdio template   Marek Vasut
• [U-Boot] [PATCH 02/10] split mpc8xx hooks from cmd_ide.c   Marek Vasut
• [U-Boot] [PATCH 02/10] split mpc8xx hooks from cmd_ide.c   Marek Vasut
• [U-Boot] [PATCH 04/10] change all versions of input_data() and output_data() to global weak aliases   Marek Vasut
• [U-Boot] [PATCH 05/10] split CPC45 board-specific IDE functions from cmd_ide.c   Marek Vasut
• [U-Boot] [PATCH 07/10] move CPC45 ide_led to the same file as other IDE hooks   Marek Vasut
• [U-Boot] [PATCH 00/10] IDE code cleanup   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/next   Marek Vasut
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 5/6 V2] kerneldoc: Annotate drivers/serial/serial.c   Marek Vasut
• [U-Boot] [PATCH 5/6 V3] kerneldoc: Annotate drivers/serial/serial.c   Marek Vasut
• [U-Boot] [PATCH 5/6] kerneldoc: Annotate drivers/serial/serial.c   Marek Vasut
• [U-Boot] [PATCH 04/10] change all versions of input_data() and output_data() to global weak aliases   Marek Vasut
• [U-Boot] [PATCH 05/10] split CPC45 board-specific IDE functions from cmd_ide.c   Marek Vasut
• [U-Boot] [PATCH V2] fs: fat: Fix mkcksum() function parameters   Marek Vasut
• [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel   Marek Vasut
• [U-Boot] [PATCH] FEC: Rework RX buffer init   Marek Vasut
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Marek Vasut
• [U-Boot] KernelDoc   Marek Vasut
• [U-Boot] [PATCH] h2200: Make use of default_serial_console   Marek Vasut
• [U-Boot] [PATCH 4/6] console & omap-common/spl: Enable use of eserial   Marek Vasut
• [U-Boot] [PATCH v2 09/10] x86: coreboot: Enable LPC TPM and CONFIG_NO_RESET_CODE   Marek Vasut
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Marek Vasut
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Marek Vasut
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Marek Vasut
• [U-Boot] [PATCH] m28: Properly configure the SPI flash chipselect   Marek Vasut
• [U-Boot] [PATCH 0/6 V3] Linker-generated arrays (take 2)   Marek Vasut
• [U-Boot] [PATCH 1/6 V3] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 2/6 V3] common: Implement support for linker-generated arrays   Marek Vasut
• [U-Boot] [PATCH 3/6 V3] common: Add .u_boot_list into all linker files   Marek Vasut
• [U-Boot] [PATCH 4/6 V3] common: Convert the U-Boot commands to LG-arrays   Marek Vasut
• [U-Boot] [PATCH 5/6 V3] common: Discard the __u_boot_cmd section   Marek Vasut
• [U-Boot] [PATCH 6/6 V3] kerneldoc: tmpl: Implement template for LG-arrays   Marek Vasut
• [U-Boot] [PATCH] tools/env: Fix build failure from missing header include   Marek Vasut
• [U-Boot] [PATCH 2/7] usb: Support the CONFIG_SYS_64BIT_LBA option   Marek Vasut
• [U-Boot] [PATCH v5 1/2] qi_lb60: add nand spl support   Marek Vasut
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   Marek Vasut
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   Marek Vasut
• [U-Boot] [PATCH v5 1/2] qi_lb60: add nand spl support   Marek Vasut
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   Marek Vasut
• [U-Boot] [PATCH v3 1/5] arm bootm: Allow to pass board specified atags   Marek Vasut
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Marek Vasut
• [U-Boot] [PATCH v3 4/5] cfb_console: Add support for some ANSI terminal escape codes   Marek Vasut
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Marek Vasut
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Marek Vasut
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] [PATCH v3 1/5] arm bootm: Allow to pass board specified atags   Marek Vasut
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] [PATCH v3 4/5] cfb_console: Add support for some ANSI terminal escape codes   Marek Vasut
• [U-Boot] [PATCH v3 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] [PATCH v3 3/5] Add power bus message definitions in twl4030.h   Marek Vasut
• [U-Boot] KernelDoc   Marek Vasut
• [U-Boot] [PATCH 1/6 V3] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 1/6 V3] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: pxa: Flip over the remaining boards to pxa_mmc_generic   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa/master   Marek Vasut
• [U-Boot] [PATCH v4 3/3] musb_udc : Fix compile warning.   Marek Vasut
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation   Marek Vasut
• [U-Boot] [PATCH 4/9] ppc4xx: Fix strict-aliasing warnings in usb_ohci.c   Marek Vasut
• [U-Boot] [PATCH] Prevent malloc with size 0   Marek Vasut
• [U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation   Marek Vasut
• [U-Boot] [PATCH] Prevent malloc with size 0   Marek Vasut
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Marek Vasut
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Marek Vasut
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 5/6 V4] common: Discard the __u_boot_cmd section   Marek Vasut
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 1/6 V5] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Marek Vasut
• [U-Boot] [PATCH] HACK: fix return value of serial_assign to get printfs working again   Marek Vasut
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Marek Vasut
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] [PATCH 1/6 V4] common: Add symbol handling for generic lists into Makefile   Marek Vasut
• [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Marek Vasut
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Marek Vasut
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Marek Vasut
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [RFC PATCH v3 13/13] omap3_beagle: use new MUSB intstead of the old one   Marek Vasut
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Marek Vasut
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Marek Vasut
• [U-Boot] [RFC PATCH 0/2] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Marek Vasut
• [U-Boot] [PATCH] common/lcd: fix eldk 4.2 compile warning   Marek Vasut
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Marek Vasut
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   Marek Vasut
• [U-Boot] [PATCH] common/lcd: fix eldk 4.2 compile warning   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Marek Vasut
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Marek Vasut
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Marek Vasut
• [U-Boot] [PATCH 1/4 V3] kerneldoc: Implant DocBook from Linux kernel   Marek Vasut
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Marek Vasut
• [U-Boot] [PATCH] usb: tegra: move Tegra EHCI implementation to correct place   Marek Vasut
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Marek Vasut
• [U-Boot] [PATCH] s3c64xx: fix the compiler error and warning   Marek Vasut
• [U-Boot] [PATCH] usb: tegra: move Tegra EHCI implementation to correct place   Marek Vasut
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI   Marek Vasut
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Marek Vasut
• [U-Boot] [PATCH 07/10] dm: wdt: Move s5p watchdog timer to drivers/watchdog/   Marek Vasut
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Marek Vasut
• [U-Boot] [RFC PATCH 1/2] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [PATCH 3/6] serial: Reorder serial_assign()   Marek Vasut
• [U-Boot] [PATCH v4 2/5] arm bootm: Do not append zero ATAG_MEM   Marek Vasut
• [U-Boot] UBIFS fails on SheevaPlug   Marek Vasut
• [U-Boot] UBIFS fails on SheevaPlug   Marek Vasut
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Marek Vasut
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Marek Vasut
• [U-Boot] [PATCH 1/8] tegra: usb: convert USB_PORTS_MAX to be a define   Marek Vasut
• [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Marek Vasut
• [U-Boot] [PATCH] sparc: Fix redefinition of macros in serial driver   Marek Vasut
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Marek Vasut
• [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Marek Vasut
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Marek Vasut
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Marek Vasut
• [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost)   Yann Vernier
• [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART   Yann Vernier
• [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values   Yann Vernier
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Yann Vernier
• [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support   Yann Vernier
• [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Yann Vernier
• [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
• [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM   Yann Vernier
• [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1   Yann Vernier
• [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch   Yann Vernier
• [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed   Yann Vernier
• [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash   Yann Vernier
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Yann Vernier
• [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
• [U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation   Amit Virdi
• [U-Boot] v2012.10-rc2 is now released   Prafulla Wadaskar
• [U-Boot] [PATCH for-rc] lsxl: also turn off fan in power down mode   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH] lsxl: set ncip to broadcast address   Prafulla Wadaskar
• [U-Boot] [PATCH] lsxl: set ncip to broadcast address   Prafulla Wadaskar
• [U-Boot] UBIFS fails on SheevaPlug   Prafulla Wadaskar
• [U-Boot] UBIFS fails on SheevaPlug   Prafulla Wadaskar
• [U-Boot] v2012.10-rc2 is now released   Michael Walle
• [U-Boot] [PATCH,for-rc] net: fix netconsole filtering   Michael Walle
• [U-Boot] [PATCH] lsxl: set ncip to broadcast address   Michael Walle
• [U-Boot] [PATCH] lsxl: set ncip to broadcast address   Michael Walle
• [U-Boot] [PATCH v2] lsxl: unset ncip for rescue mode   Michael Walle
• [U-Boot] [PATCH v2] lsxl: unset ncip for rescue mode   Michael Walle
• [U-Boot] [STATUS] v2012.10 released, Merge Window is OPEN   Linus Walleij
• [U-Boot] [PATCH] ColdFire: uart: fix build failure for missing header files   Alison Wang
• [U-Boot] [PATCH 0/2] ColdFire: Add MCF5441x CPU and MCF54418TWR ColdFire development board support   Alison Wang
• [U-Boot] [PATCH 1/2] ColdFire: Add MCF5441x CPU support   Alison Wang
• [U-Boot] [PATCH 2/2] ColdFire: Add Freescale MCF54418TWR ColdFire development board support   Alison Wang
• [U-Boot] [PATCH] ColdFire: Fix unused variable in cpu_init.c   Alison Wang
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Stephen Warren
• [U-Boot] [PATCH v2] tegra: add Colibri T20 board support   Stephen Warren
• [U-Boot] [PATCH v2] tegra: add Colibri T20 board support   Stephen Warren
• [U-Boot] [PATCH REPOST] ARM: tegra: use standard variables to define load addresses   Stephen Warren
• [U-Boot] [RFC] ARM: prevent misaligned array inits   Stephen Warren
• [U-Boot] [PATCH] tegra: move common features to a common makefile   Stephen Warren
• [U-Boot] [PATCH 0/7] Add T30 Cardhu support   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH 1/7] Tegra30: Add AVP (arm720t) files   Stephen Warren
• [U-Boot] [PATCH 2/7] Tegra30: Add CPU (armv7) files   Stephen Warren
• [U-Boot] [PATCH 3/7] Tegra30: Add common CPU (shared) files   Stephen Warren
• [U-Boot] [PATCH 4/7] Tegra30: Add arch-tegra30 include files   Stephen Warren
• [U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files   Stephen Warren
• [U-Boot] [PATCH 6/7] Tegra30: Add generic Tegra30 build support   Stephen Warren
• [U-Boot] [PATCH 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Stephen Warren
• [U-Boot] [PATCH 6/7] Tegra30: Add generic Tegra30 build support   Stephen Warren
• [U-Boot] [PATCH 4/7] Tegra30: Add arch-tegra30 include files   Stephen Warren
• [U-Boot] [PATCH v4 04/16] tegra: fdt: Add LCD definitions for Tegra   Stephen Warren
• [U-Boot] [PATCH v4 04/16] tegra: fdt: Add LCD definitions for Tegra   Stephen Warren
• [U-Boot] [PATCH v4 14/16] tegra: fdt: Add LCD definitions for Seaboard   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH v3 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Stephen Warren
• [U-Boot] [PATCH 1/9] disk: part_efi: remove indent level from loop   Stephen Warren
• [U-Boot] [PATCH 2/9] disk: part_efi: re-order partition list printf, change case   Stephen Warren
• [U-Boot] [PATCH 3/9] disk: part_efi: print partition UUIDs   Stephen Warren
• [U-Boot] [PATCH 4/9] disk: part_efi: add new partition attribute definitions   Stephen Warren
• [U-Boot] [PATCH 5/9] disk: part_efi: print raw partition attributes   Stephen Warren
• [U-Boot] [PATCH 6/9] disk: part_efi: set bootable flag in partition objects   Stephen Warren
• [U-Boot] [PATCH 7/9] disk: part_dos: checkpatch cleanups   Stephen Warren
• [U-Boot] [PATCH 8/9] disk: part_dos: align partition table prints   Stephen Warren
• [U-Boot] [PATCH 9/9] disk: part_dos: print partition UUID in partition list   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Stephen Warren
• [U-Boot] [PATCH 2/2] disk: part_dos: don't claim whole-disk FAT filesystems   Stephen Warren
• [U-Boot] [PATCH 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Stephen Warren
• [U-Boot] [PATCH 1/2] FAT: check for partition 0 not 1 for whole-disk fs   Stephen Warren
• [U-Boot] [PATCH v3] tegra: add Colibri T20 board support   Stephen Warren
• [U-Boot] [PATCH v3] tegra: add Colibri T20 board support   Stephen Warren
• [U-Boot] [PATCH] disk: get_device_and_partition() return value fixes   Stephen Warren
• [U-Boot] [PATCH V2 1/9] disk: part_efi: remove indent level from loop   Stephen Warren
• [U-Boot] [PATCH V2 2/9] disk: part_efi: re-order partition list printf, change case   Stephen Warren
• [U-Boot] [PATCH V2 3/9] disk: part_efi: print partition UUIDs   Stephen Warren
• [U-Boot] [PATCH V2 4/9] disk: part_efi: add new partition attribute definitions   Stephen Warren
• [U-Boot] [PATCH V2 5/9] disk: part_efi: print raw partition attributes   Stephen Warren
• [U-Boot] [PATCH V2 6/9] disk: part_efi: set bootable flag in partition objects   Stephen Warren
• [U-Boot] [PATCH V2 7/9] disk: part_dos: checkpatch cleanups   Stephen Warren
• [U-Boot] [PATCH V2 8/9] disk: part_dos: align partition table prints   Stephen Warren
• [U-Boot] [PATCH V2 9/9] disk: part_dos: print partition UUID in partition list   Stephen Warren
• [U-Boot] [PATCH 1/3] part: add partition number to disk_partition_t   Stephen Warren
• [U-Boot] [PATCH 2/3] FAT: make use of disk_partition_t.part   Stephen Warren
• [U-Boot] [PATCH 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH v4 07/16] tegra: Add LCD driver   Stephen Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 14/16] tegra: fdt: Add LCD definitions for Seaboard   Stephen Warren
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Stephen Warren
• [U-Boot] [PATCH V2 1/3] part: add partition number to disk_partition_t   Stephen Warren
• [U-Boot] [PATCH V2 2/3] FAT: make use of disk_partition_t.part   Stephen Warren
• [U-Boot] [PATCH V2 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Stephen Warren
• [U-Boot] U-Boot git usage model (was: Re: [PULL] u-boot-usb/next)   Stephen Warren
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH V2 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH] disk: initialize name/part fields when returning a whole disk   Stephen Warren
• [U-Boot] [PATCH V3 1/4] part: add partition number to disk_partition_t   Stephen Warren
• [U-Boot] [PATCH V3 2/4] FAT: make use of disk_partition_t.part   Stephen Warren
• [U-Boot] [PATCH V3 3/4] FAT: initialize all fields in cur_part_info, simplify init   Stephen Warren
• [U-Boot] [PATCH V3 4/4] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [RFC PATCH 1/2] fs: delete unused Makefile   Stephen Warren
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH V2 1/3] fs: delete unused Makefile   Stephen Warren
• [U-Boot] [PATCH V2 2/3] fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}   Stephen Warren
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH 1/3] ARM: tegra: Harmony: enable ULPI USB port   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: tegra: Seaboard: enable multiple USB ports   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: Whistler: remove unused USB alias   Stephen Warren
• [U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de   Stephen Warren
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Stephen Warren
• [U-Boot] [RFC PATCH 2/2] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH V3 2/4] FAT: make use of disk_partition_t.part   Stephen Warren
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] U-Boot git usage model   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add mailbox driver   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Stephen Warren
• [U-Boot] [PATCH 5/7] disk: Allow alternate EFI partition signature   Stephen Warren
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH 2/4] ARM: tegra: combine duplicate Makefile rules   Stephen Warren
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Stephen Warren
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Stephen Warren
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Stephen Warren
• [U-Boot] [U-Boot, V2, 1/9] disk: part_efi: remove indent level from loop   Stephen Warren
• [U-Boot] [U-Boot, V2, 1/9] disk: part_efi: remove indent level from loop   Stephen Warren
• [U-Boot] [PATCH V4 1/3] FAT: remove cur_part_nr   Stephen Warren
• [U-Boot] [PATCH V4 2/3] FAT: initialize all fields in cur_part_info, simplify init   Stephen Warren
• [U-Boot] [PATCH V4 3/3] FAT: implement fat_set_blk_dev(), convert cmd_fat.c   Stephen Warren
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Stephen Warren
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add mailbox driver   Stephen Warren
• [U-Boot] [PATCH 4/4] ARM: tegra: increase CONFIG_SYS_TEXT_BASE   Stephen Warren
• [U-Boot] [PATCH 3/4] ARM: tegra: check for SPL size overflow in makefile   Stephen Warren
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH 1/4] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Stephen Warren
• [U-Boot] [PATCH V2 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH V2 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Stephen Warren
• [U-Boot] [PATCH V2 3/5] ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Stephen Warren
• [U-Boot] [PATCH V2 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Stephen Warren
• [U-Boot] [PATCH V2 1/4] ARM: bcm2835: add mailbox driver   Stephen Warren
• [U-Boot] [PATCH V2 2/4] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Stephen Warren
• [U-Boot] [PATCH V2 3/4] lcd: calculate line_length after lcd_ctrl_init()   Stephen Warren
• [U-Boot] [PATCH V2 4/4] video: add a driver for the bcm2835   Stephen Warren
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH V2 3/3] fs: add partition switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Stephen Warren
• [U-Boot] [PATCH V3 1/3] fs: delete unused Makefile   Stephen Warren
• [U-Boot] [PATCH V3 2/3] fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}   Stephen Warren
• [U-Boot] [PATCH V3 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Stephen Warren
• [U-Boot] [PATCH V3 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections   Stephen Warren
• [U-Boot] [PATCH V3 2/5] ARM: enhance u-boot.lds to detect over-sized SPL   Stephen Warren
• [U-Boot] [PATCH V3 3/5] ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it   Stephen Warren
• [U-Boot] [PATCH V3 4/5] ARM: tegra: select between Seaboard/Ventana at compile time   Stephen Warren
• [U-Boot] [PATCH V3 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Stephen Warren
• [U-Boot] [PATCH V4 1/3] fs: delete unused Makefile   Stephen Warren
• [U-Boot] [PATCH V4 2/3] fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}   Stephen Warren
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH] tegra20: initialize variable to avoid compiler warning   Stephen Warren
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Stephen Warren
• [U-Boot] [PATCH 2/2] tegra: seaboard: Enable USB keyboard   Stephen Warren
• [U-Boot] [PATCH 1/2] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH 2/2] tegra: seaboard: Enable USB keyboard   Stephen Warren
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Stephen Warren
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Stephen Warren
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH v3 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Stephen Warren
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: rpi_b: enable SD controller, add related env/cmds   Stephen Warren
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Stephen Warren
• [U-Boot] [PATCH v4 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Stephen Warren
• [U-Boot] [PATCH 2/2] am335x_evm: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Stephen Warren
• [U-Boot] [PATCH v2 1/3] USB: make usb_kbd obey USB DMA alignment requirements   Stephen Warren
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Stephen Warren
• [U-Boot] Multiple stdin/out without CONFIG_CONSOLE_MUX?   Stephen Warren
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Stephen Warren
• [U-Boot] [PATCH] serial: add environment control for SERIAL_MULTI   Stephen Warren
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Stephen Warren
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Stephen Warren
• [U-Boot] [PATCH v2 2/2] tegra: move to common SPL framework   Stephen Warren
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Stephen Warren
• [U-Boot] Merging device trees at runtime for module-based systems   Stephen Warren
• [U-Boot] S-o-b entries for bcm2708 SDHCI driver in the downstream R.Pi Linux kernel   Stephen Warren
• [U-Boot] [PATCH V3 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL   Stephen Warren
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Stephen Warren
• [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Stephen Warren
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Stephen Warren
• [U-Boot] [PATCH 0/3] Bring in new I2C framework   Stephen Warren
• [U-Boot] Custodian branch base commits   Stephen Warren
• [U-Boot] [PATCH] fs: handle CONFIG_NEEDS_MANUAL_RELOC   Stephen Warren
• [U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port   Stephen Warren
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Stephen Warren
• [U-Boot] [PATCH] fs/fs.c: fix fs_set_blk_dev() for manual relocation   Stephen Warren
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Stephen Warren
• [U-Boot] Custodian branch base commits   Stephen Warren
• [U-Boot] Custodian branch base commits   Stephen Warren
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH 1/3] fs: fix do_fsload() handling of optional arguments   Stephen Warren
• [U-Boot] [PATCH 2/3] cmd_ext4: remove TABs from command help text   Stephen Warren
• [U-Boot] [PATCH 3/3] fs: fix number base behaviour change in fatload/ext*load   Stephen Warren
• [U-Boot] Custodian branch base commits   Stephen Warren
• [U-Boot] [PATCH] libfdt: introduce fdt type annotation for use by endian checkers   Stephen Warren
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] Custodian branch base commits   Stephen Warren
• [U-Boot] [PATCH V4 3/3] fs: add filesystem switch libary, implement ls and fsload commands   Stephen Warren
• [U-Boot] [PATCH] fs: rename fsload command to load   Stephen Warren
• [U-Boot] [PATCH] Add board_name to CONFIG_ENV_VARS_UBOOT_CONFIG   Stephen Warren
• [U-Boot] Tegra USB driver movement   Tom Warren
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Tom Warren
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Tom Warren
• [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell   Tom Warren
• [U-Boot] pull request for u-boot-tegra/next into ARM next   Tom Warren
• [U-Boot] [PATCH 0/7] Add T30 Cardhu support   Tom Warren
• [U-Boot] [PATCH 1/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH 2/7] Tegra30: Add CPU (armv7) files   Tom Warren
• [U-Boot] [PATCH 3/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH 4/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH 6/7] Tegra30: Add generic Tegra30 build support   Tom Warren
• [U-Boot] [PATCH 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH 2/7] Tegra30: Add CPU (armv7) files   Tom Warren
• [U-Boot] [PATCH 1/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH 3/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH 4/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH 6/7] Tegra30: Add generic Tegra30 build support   Tom Warren
• [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard   Tom Warren
• [U-Boot] [PATCH] tegra: move common features to a common makefile   Tom Warren
• [U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de   Tom Warren
• [U-Boot] [PATCH v2] tegra: nand: make ONFI detection work   Tom Warren
• [U-Boot] [PATCH] serial: remove calls to serial_assign()   Tom Warren
• [U-Boot] [PATCH] arm720t: add back common.h include   Tom Warren
• [U-Boot] [PATCH] arm720t: add back common.h include   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH 7/8] tegra: usb: move implementation into right directory   Tom Warren
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Tom Warren
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Tom Warren
• [U-Boot] [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard   Tom Warren
• [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Tom Warren
• [U-Boot] Uncompress error with LZO   Matthias Weißer
• [U-Boot] Uncompress error with LZO   Matthias Weißer
• [U-Boot] [PATCH] arm: trats: Turn power down for core 1   Piotr Wilczek
• [U-Boot] [PATCH] arm: trats: Power down core 1   Piotr Wilczek
• [U-Boot] [PATCH 0/5] EXYNOS4: Enable I2C support   Piotr Wilczek
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Piotr Wilczek
• [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing   Piotr Wilczek
• [U-Boot] Pull request: u-boot-arm/master to u-boot/master   Piotr Wilczek
• [U-Boot] [PATCH 0/6] EXYNOS: Add support for Exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH 1/6] Exynos: Exynos4x10: Add base addresses for Exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH 2/6] Exynos: Exynos4x10: Add clock structure for exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH 3/6] Exynos: Exynos4x10: Add gpio structure for Exynos4X10   Piotr Wilczek
• [U-Boot] [PATCH 4/6] Exynos: Exynos4x10: add power structure for Exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH 5/6] Exynos: Exynos4x10: add sysreg structure for exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH 6/6] arm: trats: Use exynos4x10 structures on Trats board   Piotr Wilczek
• [U-Boot] [PATCH 0/6] EXYNOS: Add support for Exynos4x10   Piotr Wilczek
• [U-Boot] [PATCH v5 0/5] arm:exynos: Support for display drivers   Piotr Wilczek
• [U-Boot] [PATCH v5 1/5] exynos4: universal_C210: use software SPI   Piotr Wilczek
• [U-Boot] [PATCH v5 2/5] misc:max8998 Add LDO macros   Piotr Wilczek
• [U-Boot] [PATCH v5 3/5] drivers: video: Add ld9040 video driver   Piotr Wilczek
• [U-Boot] [PATCH v5 4/5] drivers: video: fix image position   Piotr Wilczek
• [U-Boot] [PATCH v5 5/5] exynos4: universal_C210: add display support   Piotr Wilczek
• [U-Boot] [PATCH v2 0/9] arm:exynos4: Enable Multi I2C   Piotr Wilczek
• [U-Boot] [PATCH v2 1/9] exynos:clock: Add i2c clock   Piotr Wilczek
• [U-Boot] [PATCH v2 2/9] exynos:cpu: Add Exynos4 I2C spacing   Piotr Wilczek
• [U-Boot] [PATCH v2 3/9] exynos:pinmux: Add pinmux support for i2c   Piotr Wilczek
• [U-Boot] [PATCH v2 4/9] drivers:i2c: Modify I2C driver for Exynos4   Piotr Wilczek
• [U-Boot] [PATCH v2 5/9] drivers:i2c: Add support for multi I2C   Piotr Wilczek
• [U-Boot] [PATCH v2 6/9] driver:i2c: Modify Soft I2C driver for Multi-I2C   Piotr Wilczek
• [U-Boot] [PATCH v2 7/9] driver:i2c: Modify s3c24x0_i2c driver for Multi-I2C   Piotr Wilczek
• [U-Boot] [PATCH v2 8/9] drivers:i2c: modify I2C header for Multi-I2C   Piotr Wilczek
• [U-Boot] [PATCH v2 9/9] arm:trats: Use Multi-I2C on Trarts board   Piotr Wilczek
• [U-Boot] [PATCH v2 0/9] arm:exynos4: Enable Multi I2C   Piotr Wilczek
• [U-Boot] phy device driver issues   Aaron Williams
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Scott Wood
• [U-Boot] Booting through nand flash with other address   Scott Wood
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Scott Wood
• [U-Boot] Booting through nand flash with other address   Scott Wood
• [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc   Scott Wood
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Scott Wood
• [U-Boot] [PATCH] yaffs2: Fix GCC 4.6 compile warnings   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] mpc85xx debug TLB entry   Scott Wood
• [U-Boot] mpc85xx debug TLB entry   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] U-Boot git usage model (was: Re: [PULL] u-boot-usb/next)   Scott Wood
• [U-Boot] u-boot on my board freescale P1010RDB is erased   Scott Wood
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Scott Wood
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Scott Wood
• [U-Boot] [PATCH] ARM926: Add mb to the cache invalidate/flush   Scott Wood
• [U-Boot] U-Boot git usage model   Scott Wood
• [U-Boot] mpc85xx debug TLB entry   Scott Wood
• [U-Boot] [PATCH v2] tegra: nand: make ONFI detection work   Scott Wood
• [U-Boot] reg: P2020 include config file - u-boot basic doubt   Scott Wood
• [U-Boot] [PATCH 31/32] drivers/mtd/nand: sparse fixes   Scott Wood
• [U-Boot] Access IO register with writel/readl?   Scott Wood
• [U-Boot] P2020rdb :- process hangs while invalidate_tlb's   Scott Wood
• [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1   Scott Wood
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Scott Wood
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Scott Wood
• [U-Boot] [PATCH] powerpc/mpc85xx: Temporary fix for spin table backward compatibility   Scott Wood
• [U-Boot] [PATCH] common/spl: Mark arguments as unused   Scott Wood
• [U-Boot] [PATCH v7] qi_lb60: add nand spl support   Scott Wood
• [U-Boot] [PATCH v2 24/25] drivers/mtd/nand: sparse fixes   Scott Wood
• [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl   Scott Wood
• [U-Boot] [PATCH v2 01/22] serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONS   Scott Wood
• [U-Boot] [PATCH v2 02/22] serial/ns16550: wait for TEMT before initializing   Scott Wood
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Scott Wood
• [U-Boot] [PATCH v2 04/22] powerpc/mpc85xx: add comma before "already enabled"   Scott Wood
• [U-Boot] [PATCH v2 05/22] Add u-boot-pad.bin target to the Makefile   Scott Wood
• [U-Boot] [PATCH v2 06/22] spl: rename u-boot-pad.bin to u-boot-with-spl.bin   Scott Wood
• [U-Boot] [PATCH v2 07/22] spl: introduce CONFIG_SPL_TARGET   Scott Wood
• [U-Boot] [PATCH v2 08/22] powerpc: change .fixup test to a GCC version test   Scott Wood
• [U-Boot] [PATCH v2 09/22] powerpc/mpc85xx: fix TLB alignment   Scott Wood
• [U-Boot] [PATCH v2 10/22] powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx   Scott Wood
• [U-Boot] [PATCH v2 11/22] spl/mpc85xx: move udelay to cpu code   Scott Wood
• [U-Boot] [PATCH v2 12/22] spl: include resetvec and lib8xxx   Scott Wood
• [U-Boot] [PATCH v2 13/22] spl/mpc85xx: rename cpu_init_nand.c to spl_minimal.c   Scott Wood
• [U-Boot] [PATCH v2 14/22] powerpc/mpc85xx: consistently use COBJS-y   Scott Wood
• [U-Boot] [PATCH v2 15/22] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL   Scott Wood
• [U-Boot] [PATCH v2 16/22] spl/85xx: new SPL support   Scott Wood
• [U-Boot] [PATCH v2 17/22] powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support   Scott Wood
• [U-Boot] [PATCH v2 18/22] spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.   Scott Wood
• [U-Boot] [PATCH v2 19/22] spl/nand: config symbol documentation   Scott Wood
• [U-Boot] [PATCH v2 20/22] powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new spl   Scott Wood
• [U-Boot] [PATCH v2 21/22] powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map   Scott Wood
• [U-Boot] [PATCH v2 22/22] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot   Scott Wood
• [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl   Scott Wood
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Scott Wood
• [U-Boot] [PATCH v2 22/22] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot   Scott Wood
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Scott Wood
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Scott Wood
• [U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.   Josh Wu
• [U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.   Josh Wu
• [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings   Shaohui Xie
• [U-Boot] [PATCH] powerpc/espi: remove write command length check   Shaohui Xie
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
• [U-Boot] [RFC PATCH v3 01/13] linux/usb/ch9.h: update with the version from Linux tree   Ilya Yanok
• [U-Boot] [RFC PATCH v3 02/13] usb: use linux/usb/ch9.h instead of usbdescriptors.h   Ilya Yanok
• [U-Boot] [RFC PATCH v3 03/13] musb-new: port of Linux musb driver   Ilya Yanok
• [U-Boot] [RFC PATCH v3 04/13] musb-new: dsps backend driver   Ilya Yanok
• [U-Boot] [RFC PATCH v3 05/13] am33xx: init OTG hardware and new musb gadget driver   Ilya Yanok
• [U-Boot] [RFC PATCH v3 06/13] am335x_evm: enable both musb gadget and host   Ilya Yanok
• [U-Boot] [RFC PATCH v3 07/13] musb-new: am35x backend driver   Ilya Yanok
• [U-Boot] [RFC PATCH v3 08/13] OMAP3: am35x_def.h: add USB defines   Ilya Yanok
• [U-Boot] [RFC PATCH v3 09/13] OMAP3: am35x: add musb functions   Ilya Yanok
• [U-Boot] [RFC PATCH v3 10/13] am3517_evm: switch to musb-new   Ilya Yanok
• [U-Boot] [RFC PATCH v3 11/13] musb-new: omap2plus backend driver   Ilya Yanok
• [U-Boot] [RFC PATCH v3 12/13] omap3_beagle: add musb-new init   Ilya Yanok
• [U-Boot] [RFC PATCH v3 13/13] omap3_beagle: use new MUSB intstead of the old one   Ilya Yanok
• [U-Boot] [RFC PATCH v3 13/13] omap3_beagle: use new MUSB intstead of the old one   Ilya Yanok
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
• [U-Boot] [PATCH v1 0/8] NAND support for AM33XX   Ilya Yanok
• [U-Boot] [PATCH v1 1/8] OMAP: include sys_proto.h from boot-common   Ilya Yanok
• [U-Boot] [PATCH v1 2/8] am335x_evm: add nand pinmux definition   Ilya Yanok
• [U-Boot] [PATCH v1 3/8] am33xx: NAND support   Ilya Yanok
• [U-Boot] [PATCH v1 4/8] am335x_evm: enable NAND support   Ilya Yanok
• [U-Boot] [PATCH v1 5/8] am33xx: add ELM support   Ilya Yanok
• [U-Boot] [PATCH v1 6/8] omap_gpmc: BCH8 support (ELM based)   Ilya Yanok
• [U-Boot] [PATCH v1 7/8] am33xx_spl_bch: simple SPL nand loader for AM33XX   Ilya Yanok
• [U-Boot] [PATCH v1 8/8] am335x_evm: enable SPL NAND support   Ilya Yanok
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Liu Ying
• [U-Boot] [PATCH 1/1] ipu common: reset ipuv3 correctly   Liu Ying
• [U-Boot] FAT wirte append   Qing Z
• [U-Boot] include: fix mips64 build warning   Zhi-zhou Zhang
• [U-Boot] Pull request: u-boot-coldfire/master   Jin Zhengxiong-R64188
• [U-Boot] Pull request: u-boot-coldfire/master   Jin Zhengxiong-R64188
• [U-Boot] Pull request: u-boot-coldfire/master   Jin Zhengxiong-R64188
• [U-Boot] Pull request:u-boot-coldfire/master   Jin Zhengxiong-R64188
• [U-Boot] v2012.10-rc2 tar balls on ftp   Detlev Zundel
• [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
• [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
• [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
• [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
• [U-Boot] [PATCHv5] ARM: Add Altera SOCFPGA Cyclone5   dinguyen at altera.com
• [U-Boot] [PATCHv6] ARM: Add Altera SOCFPGA Cyclone5   dinguyen at altera.com
• [U-Boot] [PATCHv7] ARM: Add Altera SOCFPGA Cyclone5   dinguyen at altera.com
• [U-Boot] [PATCHv8] ARM: Add Altera SOCFPGA Cyclone5   dinguyen at altera.com
• [U-Boot] [PATCH v2 1/2] coldfire: Add support for amcore board   angelo
• [U-Boot] [PATCH v2 2/2] coldfire: Add support for amcore board   angelo
• [U-Boot] jffs2_1pass_build_lists max_totlen question   arunkann
• [U-Boot] [PATCH V3 30/32] mx6qsabrelite: change CONFIG_SYS_PROMPT   stefano babic
• [U-Boot] [PATCH V3 17/32] imximage.cfg: run files through C preprocessor   stefano babic
• [U-Boot] [PATCH] boards: remove the no longer used CONFIG_EHCI_DCACHE   stefano babic
• [U-Boot] CONFIG_SYS_LBC_BASE in MPC8641HPCN.h   kathirvelr at bel.co.in
• [U-Boot] [PATCH] i2c: sh: Remove irq_wait function   hs at denx.de
• [U-Boot] P2020rdb :- process hangs while invalidate_tlb's   diyaa
• [U-Boot] [u-boot] Adding missing CONFIG_SYS_CACHELINE_SIZE to boards definitions   esw
• [U-Boot] u-boot on my board freescale P1010RDB is erased   randriamanjaka franky
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH mips-next] MIPS: qemu_mips.h: cleanup coding style and checkpatch.pl issues   daniel.schwierzeck at gmail.com
• [U-Boot] [PATCH] common: cmd_bdinfo: fix type of value in print_lnum   daniel.schwierzeck at gmail.com
• [U-Boot] [PATCH] Sandbox: Add spi driver to sandbox   viktor.krivak at gmail.com
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   xiangfu liu
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   xiangfu liu
• [U-Boot] [PATCH v2 4/5] tools/env: Serialize calls to fw_*env   uboot at lukaperkov.net
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   uboot at lukaperkov.net
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v4 1/2] qi_lb60: add nand spl support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v4 2/2] qi_lb60: add software usbboot support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v4 0/2] qi_lb60 add nand spl and usbboot support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v5 0/2] qi_lb60(Ben NanoNote): add nand spl and usbboot support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v5 1/2] qi_lb60: add nand spl support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v5 2/2] qi_lb60: add software usbboot support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v6] qi_lb60(Ben NanoNote): add nand spl and usbboot support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v6] qi_lb60: add nand spl support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v7] qi_lb60: add nand spl support   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v7] qi_lb60: add nand spl support   xiangfu at openmobilefree.net
• [U-Boot] Need of MMU in uboot level   shabbir
• [U-Boot] Configure a MICRON DDR2 SDRAM MT47H512M4 - 64 Meg x 4 x 8 on MPC8323 custom board   SETTE AGOSTINO - technolabs
• [U-Boot] R: Configure a MICRON DDR2 SDRAM MT47H512M4 - 64 Meg x 4 x 8 on MPC8323 custom board   SETTE AGOSTINO - technolabs
• [U-Boot] Strange behavior in U-boot fatload command for SD/MMC card   victor
• [U-Boot] mmc Status Error: 0x01FBB4D0   victor
• [U-Boot] USB gadget driver   victor
• [U-Boot] Colibri PXA270   Takács Áron
• [U-Boot] Colibri PXA270 too slow   Takács Áron
• [U-Boot] [PATCH v3 5/5] New board support: Nokia RX-51 aka N900   Ивайло Димитров