[U-Boot] [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
Marek Vasut
marex at denx.de
Fri Oct 19 12:35:58 CEST 2012
Dear Shengzhou Liu,
> when missing USB PHY clock, u-boot will hang during USB
> initialization when issuing "usb start". We should check
> USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case.
>
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> ---
> against master branch of upstream u-boot tree
> v2: integrated Marek's comment to use single negation.
Ok, WFM,
Acked-by: Marek Vasut <marex at denx.de>
> drivers/usb/host/ehci-fsl.c | 22 ++++++++++++++++------
> 1 files changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index 7b8f033..f54b408 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -30,6 +30,18 @@
>
> #include "ehci.h"
>
> +/* Check USB PHY clock valid */
> +static int usb_phy_clk_valid(struct usb_ehci *ehci)
> +{
> + if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
> + in_be32(&ehci->prictrl))) {
> + printf("USB PHY clock invalid!\n");
> + return 0;
> + } else {
> + return 1;
> + }
> +}
> +
> /*
> * Create the appropriate control structures to manage
> * a new EHCI host controller.
> @@ -82,18 +94,16 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr,
> struct ehci_hcor **hcor) udelay(1000); /* delay required for PHY Clk to
> appear */
> #endif
> out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
> + setbits_be32(&ehci->control, USB_EN);
> } else {
> -#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
> - clrbits_be32(&ehci->control, UTMI_PHY_EN);
> setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
> + clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
> udelay(1000); /* delay required for PHY Clk to appear */
> -#endif
> + if (!usb_phy_clk_valid(ehci))
> + return -EINVAL;
> out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
> }
>
> - /* Enable interface. */
> - setbits_be32(&ehci->control, USB_EN);
> -
> out_be32(&ehci->prictrl, 0x0000000c);
> out_be32(&ehci->age_cnt_limit, 0x00000040);
> out_be32(&ehci->sictrl, 0x00000001);
Best regards,
Marek Vasut
More information about the U-Boot
mailing list