[U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.

[Andreas Bießmann]

Hi Josh,

On 09.10.12 12:11, Josh Wu wrote:
> Hi, Andreas
> 
> Any feedback of these patches?

short answer: no ;)

I think they could go into next (no obvious objections), but I would
like to do some runtime tests on avr32 before. Beside that, if you do
not insist on applying them ASAP to next I would like to wait until the
release next Monday and apply the patches to u-boot-atmel/master then.
Is that OK for you?

Best regards

Andreas Bießmann

> 
> Best Regards,
> Josh Wu
> 
> On 9/14/2012 4:22 PM, Josh Wu wrote:
>> This patch series enable MCI0 solt in at91sam9x5ek board.
>>
>> Josh Wu (3):
>>    mmc: at91: add multi block read/write support.
>>    ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
>>    mmc: at91: use max timeout value. It will avoid some situation that
>>      timeout happened.
>>
>>   arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |   15 +++++++++++++++
>>   board/atmel/at91sam9x5ek/at91sam9x5ek.c          |   10 ++++++++++
>>   drivers/mmc/gen_atmel_mci.c                      |   15 +++++++++++++--
>>   include/atmel_mci.h                              |    7 ++++++-
>>   include/configs/at91sam9x5ek.h                   |   10 ++++++++++
>>   5 files changed, 54 insertions(+), 3 deletions(-)
>>
>