[U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.
Josh Wu
josh.wu at atmel.com
Tue Oct 9 12:11:09 CEST 2012
Hi, Andreas
Any feedback of these patches?
Best Regards,
Josh Wu
On 9/14/2012 4:22 PM, Josh Wu wrote:
> This patch series enable MCI0 solt in at91sam9x5ek board.
>
> Josh Wu (3):
> mmc: at91: add multi block read/write support.
> ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
> mmc: at91: use max timeout value. It will avoid some situation that
> timeout happened.
>
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++
> drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++--
> include/atmel_mci.h | 7 ++++++-
> include/configs/at91sam9x5ek.h | 10 ++++++++++
> 5 files changed, 54 insertions(+), 3 deletions(-)
>
More information about the U-Boot
mailing list