[U-Boot] [PATCH 1/9 V3] SOUND: SAMSUNG: Add I2S driver
Rajeshwari Birje
rajeshwari.birje at gmail.com
Fri Oct 26 06:22:02 CEST 2012
Hi Simon Glass,
Thank you for the comments.
Will correct the issues mentioned.
Regards,
Rajeshwari Shinde.
On Thu, Oct 25, 2012 at 10:32 PM, Simon Glass <sjg at chromium.org> wrote:
> Hi,
>
> On Mon, Oct 22, 2012 at 11:57 PM, Rajeshwari Shinde
> <rajeshwari.s at samsung.com> wrote:
> > This patch adds driver for I2S interface specific to samsung.
> >
> > Signed-off-by: R. Chandrasekar <rcsekar at samsung.com>
> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> > ---
> > Changes in V2:
> > - renamed i2s.c to samsung-i2s.c.
> > Changes in V3:
> > - wave sine table removed and the same in calculated in a function.
>
> This looks great. There are a few style nits that you might want to
> correct, but:
>
> Acked-by: Simon Glass <sjg at chromium.org>
>
> > Makefile | 1 +
> > drivers/sound/Makefile | 47 ++++++
> > drivers/sound/samsung-i2s.c | 358
> +++++++++++++++++++++++++++++++++++++++++++
> > drivers/sound/sound.c | 228 +++++++++++++++++++++++++++
> > include/i2s.h | 127 +++++++++++++++
> > include/sound.h | 62 ++++++++
> > 6 files changed, 823 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/sound/Makefile
> > create mode 100644 drivers/sound/samsung-i2s.c
> > create mode 100644 drivers/sound/sound.c
> > create mode 100644 include/i2s.h
> > create mode 100644 include/sound.h
> >
> > diff --git a/Makefile b/Makefile
> > index a40d4cc..f7d7f47 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -293,6 +293,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
> > endif
> > LIBS-y += drivers/rtc/librtc.o
> > LIBS-y += drivers/serial/libserial.o
> > +LIBS-y += drivers/sound/libsound.o
> > LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
> > LIBS-y += drivers/twserial/libtws.o
> > LIBS-y += drivers/usb/eth/libusb_eth.o
> > diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
> > new file mode 100644
> > index 0000000..18ad2c9
> > --- /dev/null
> > +++ b/drivers/sound/Makefile
> > @@ -0,0 +1,47 @@
> > +#
> > +# Copyright (C) 2012 Samsung Electronics
> > +# R. Chandrasekar <rcsekar at samsung.com>
> > +#
> > +# See file CREDITS for list of people who contributed to this
> > +# project.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation; either version 2 of
> > +# the License, or (at your option) any later version.
> > +#
> > +# This program is distributed in the hope that it will be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write to the Free Software
> > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > +# MA 02111-1307 USA
> > +#
> > +
> > +include $(TOPDIR)/config.mk
> > +
> > +LIB := $(obj)libsound.o
> > +
> > +COBJS-$(CONFIG_SOUND) += sound.o
> > +COBJS-$(CONFIG_I2S) += samsung-i2s.o
> > +
> > +COBJS := $(COBJS-y)
> > +SRCS := $(COBJS:.o=.c)
> > +OBJS := $(addprefix $(obj),$(COBJS))
> > +
> > +all: $(LIB)
> > +
> > +$(LIB): $(obj).depend $(OBJS)
> > + $(call cmd_link_o_target, $(OBJS))
> > +
> >
> +#########################################################################
> > +
> > +# defines $(obj).depend target
> > +include $(SRCTREE)/rules.mk
> > +
> > +sinclude $(obj).depend
> > +
> > +#
> > diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c
> > new file mode 100644
> > index 0000000..3ce0b59
> > --- /dev/null
> > +++ b/drivers/sound/samsung-i2s.c
> > @@ -0,0 +1,358 @@
> > +/*
> > + * Copyright (C) 2012 Samsung Electronics
> > + * R. Chandrasekar <rcsekar at samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <asm/arch/clk.h>
> > +#include <asm/arch/pinmux.h>
> > +#include <asm/arch/i2s-regs.h>
> > +#include <asm/io.h>
> > +#include <common.h>
> > +#include <sound.h>
> > +#include <i2s.h>
> > +
> > +#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf)
> > +#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf)
> > +#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf)
> > +#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf)
> > +#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f)
> > +
> > +#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */
> > +
> > +/*
> > + * Sets the frame size for I2S LR clock
> > + *
> > + * @param i2s_reg i2s regiter address
> > + * @param rfs Frame Size
> > + */
> > +static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int
> rfs)
> > +{
> > + unsigned int mod = readl(&i2s_reg->mod);
> > +
> > + mod &= ~MOD_RCLK_MASK;
> > +
> > + switch (rfs) {
> > + case 768:
> > + mod |= MOD_RCLK_768FS;
> > + break;
> > + case 512:
> > + mod |= MOD_RCLK_512FS;
> > + break;
> > + case 384:
> > + mod |= MOD_RCLK_384FS;
> > + break;
> > + default:
> > + mod |= MOD_RCLK_256FS;
> > + break;
> > + }
> > +
> > + writel(mod, &i2s_reg->mod);
> > +}
> > +
> > +/*
> > + * Sets the i2s transfer control
> > + *
> > + * @param i2s_reg i2s regiter address
> > + * @param on 1 enable tx , 0 disable tx transfer
> > + */
> > +static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
> > +{
> > + unsigned int con = readl(&i2s_reg->con);
> > + unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
> > +
> > + if (on) {
> > + con |= CON_ACTIVE;
> > + con &= ~CON_TXCH_PAUSE;
> > +
> > + } else {
> > +
> > + con |= CON_TXCH_PAUSE;
> > + con &= ~CON_ACTIVE;
> > + }
> > +
> > + writel(mod, &i2s_reg->mod);
> > + writel(con, &i2s_reg->con);
> > +}
> > +
> > +/*
> > + * set the bit clock frame size (in multiples of LRCLK)
> > + *
> > + * @param i2s_reg i2s regiter address
> > + * @param bfs bit Frame Size
> > + */
> > +static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned
> bfs)
> > +{
> > + unsigned int mod = readl(&i2s_reg->mod);
> > +
> > + mod &= ~MOD_BCLK_MASK;
> > +
> > + switch (bfs) {
> > + case 48:
> > + mod |= MOD_BCLK_48FS;
> > + break;
> > + case 32:
> > + mod |= MOD_BCLK_32FS;
> > + break;
> > + case 24:
> > + mod |= MOD_BCLK_24FS;
> > + break;
> > + case 16:
> > + mod |= MOD_BCLK_16FS;
> > + break;
> > + default:
> > + return;
> > + }
> > + writel(mod, &i2s_reg->mod);
> > +}
> > +
> > +/*
> > + * flushes the i2stx fifo
> > + *
> > + * @param i2s_reg i2s regiter address
> > + * @param flush Tx fifo flush command (0x00 - do not
> flush
> > + * 0x80 - flush tx fifo)
> > + */
> > +void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
> > +{
> > + /* Flush the FIFO */
> > + setbits_le32(&i2s_reg->fic, flush);
> > + clrbits_le32(&i2s_reg->fic, flush);
> > +}
> > +
> > +/*
> > + * Set System Clock direction
> > + *
> > + * @param i2s_reg i2s regiter address
> > + * @param dir Clock direction
> > + *
> > + * @return int value 0 for success, -1 in case of error
> > + */
> > +int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
> > +{
> > + unsigned int mod = readl(&i2s_reg->mod);
> > +
> > + if (dir == SND_SOC_CLOCK_IN)
> > + mod |= MOD_CDCLKCON;
> > + else
> > + mod &= ~MOD_CDCLKCON;
> > +
> > + writel(mod, &i2s_reg->mod);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Sets I2S Clcok format
> > + *
> > + * @param fmt i2s clock properties
> > + * @param i2s_reg i2s regiter address
> > + *
> > + * @return int value 0 for success, -1 in case of error
> > + */
> > +int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
> > +{
> > + unsigned int mod = readl(&i2s_reg->mod);
> > + unsigned int tmp = 0;
> > + unsigned int ret = 0;
> > +
> > + /* Format is priority */
> > + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> > + case SND_SOC_DAIFMT_RIGHT_J:
> > + tmp |= MOD_LR_RLOW;
> > + tmp |= MOD_SDF_MSB;
> > + break;
> > + case SND_SOC_DAIFMT_LEFT_J:
> > + tmp |= MOD_LR_RLOW;
> > + tmp |= MOD_SDF_LSB;
> > + break;
> > + case SND_SOC_DAIFMT_I2S:
> > + tmp |= MOD_SDF_IIS;
> > + break;
> > + default:
> > + debug("%s: Invalid format priority [0x%x]\n", __func__,
> > + (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
> > + return -1;
> > + }
> > +
> > + /*
> > + * INV flag is relative to the FORMAT flag - if set it simply
> > + * flips the polarity specified by the Standard
> > + */
> > + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> > + case SND_SOC_DAIFMT_NB_NF:
> > + break;
> > + case SND_SOC_DAIFMT_NB_IF:
> > + if (tmp & MOD_LR_RLOW)
> > + tmp &= ~MOD_LR_RLOW;
> > + else
> > + tmp |= MOD_LR_RLOW;
> > + break;
> > + default:
> > + debug("%s: Invalid clock ploarity input [0x%x]\n",
> __func__,
> > + (fmt & SND_SOC_DAIFMT_INV_MASK));
> > + return -1;
> > + }
> > +
> > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> > + case SND_SOC_DAIFMT_CBS_CFS:
> > + tmp |= MOD_SLAVE;
> > + break;
> > + case SND_SOC_DAIFMT_CBM_CFM:
> > + /* Set default source clock in Master mode */
> > + ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
> > + if (ret != 0) {
> > + debug("%s:set i2s clock direction failed\n",
> __func__);
> > + return -1;
> > + }
> > + break;
> > + default:
> > + debug("%s: Invalid master selection [0x%x]\n", __func__,
> > + (fmt & SND_SOC_DAIFMT_MASTER_MASK));
> > + return -1;
> > + }
> > +
> > + mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
> > + mod |= tmp;
> > + writel(mod, &i2s_reg->mod);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Sets the sample width in bits
> > + *
> > + * @param blc samplewidth (size of sample in bits)
> > + * @param i2s_reg i2s regiter address
> > + *
> > + * @return int value 0 for success, -1 in case of error
> > + */
> > +int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
> > +{
> > + unsigned int mod = readl(&i2s_reg->mod);
> > +
> > + mod &= ~MOD_BLCP_MASK;
> > + mod &= ~MOD_BLC_MASK;
> > +
> > + switch (blc) {
> > + case 8:
> > + mod |= MOD_BLCP_8BIT;
> > + mod |= MOD_BLC_8BIT;
> > + break;
> > + case 16:
> > + mod |= MOD_BLCP_16BIT;
> > + mod |= MOD_BLC_16BIT;
> > + break;
> > +
> remove blank line
>
> > + case 24:
> > + mod |= MOD_BLCP_24BIT;
> > + mod |= MOD_BLC_24BIT;
> > + break;
> > + default:
> > + debug("%s: Invalid sample size input [0x%x]\n",
> > + __func__, blc);
> > + return -1;
> > + }
> > + writel(mod, &i2s_reg->mod);
> > +
> > + return 0;
> > +}
> > +
> > +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
> > + unsigned long data_size)
> > +{
> > + int i;
> > + int start;
> > + struct i2s_reg *i2s_reg =
> > + (struct i2s_reg *)pi2s_tx->base_address;
> > +
> > + if (data_size < FIFO_LENGTH) {
> > + debug("%s : Invalid data size\n", __func__);
> > + return -1; /* invalid pcm data size */
> > + }
> > +
> > + /* fill the tx buffer before stating the tx transmit */
> > + for (i = 0; i < FIFO_LENGTH; i++)
> > + writel(*data++, &i2s_reg->txd);
> > +
> > + data_size -= FIFO_LENGTH;
> > + i2s_txctrl(i2s_reg, I2S_TX_ON);
> > +
> > + while (data_size > 0) {
> > + start = get_timer(0);
> > + if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
> > + writel(*data++, &i2s_reg->txd);
> > + data_size--;
> > + } else {
> > + if (get_timer(start) > TIMEOUT_I2S_TX) {
> > + i2s_txctrl(i2s_reg, I2S_TX_OFF);
> > + debug("%s: I2S Transfer Timeout\n",
> __func__);
> > + return -1;
> > + }
> > + }
> > + }
> > + i2s_txctrl(i2s_reg, I2S_TX_OFF);
> > +
> > + return 0;
> > +}
> > +
> > +int i2s_tx_init(struct i2stx_info *pi2s_tx)
> > +{
> > + int ret;
> > + struct i2s_reg *i2s_reg =
> > + (struct i2s_reg *)pi2s_tx->base_address;
> > +
> > + /* Initialize GPIO for I2s */
> > + exynos_pinmux_config(PERIPH_ID_I2S1, 0);
> > +
> > + /* Set EPLL Clock */
> > + ret = set_epll_clk(pi2s_tx->audio_pll_clk);
> > + if (ret != 0) {
> > + debug("%s: epll clock set rate falied\n", __func__);
> > + return -1;
> > + }
> > +
> > + /* Select Clk Source for Audio1 */
> > + set_i2s_clk_source();
> > +
> > + /* Set Prescaler to get MCLK */
> > + set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
> > + (pi2s_tx->samplingrate *
> (pi2s_tx->rfs)));
> > +
> > + /* Configure I2s format */
> > + ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S |
> SND_SOC_DAIFMT_NB_NF |
> > + SND_SOC_DAIFMT_CBM_CFM));
> > + if (ret == 0) {
> > + i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
> > + ret = i2s_set_samplesize(i2s_reg,
> pi2s_tx->bitspersample);
> > + if (ret != 0) {
> > + debug("%s:set sample rate failed\n", __func__);
> > + return -1;
> > + }
> > +
> > + i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
> > + /* disable i2s transfer flag and flush the fifo */
> > + i2s_txctrl(i2s_reg, I2S_TX_OFF);
> > + i2s_fifo(i2s_reg, FIC_TXFLUSH);
> > + } else
> > + debug("%s: failed\n", __func__);
>
> {} around this else
>
> > +
> > + return ret;
> > +}
> > diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
> > new file mode 100644
> > index 0000000..ff76996
> > --- /dev/null
> > +++ b/drivers/sound/sound.c
> > @@ -0,0 +1,228 @@
> > +/*
> > + * Copyright (C) 2012 Samsung Electronics
> > + * R. Chandrasekar <rcsekar at samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <malloc.h>
> > +#include <common.h>
> > +#include <asm/io.h>
> > +#include <i2c.h>
> > +#include <i2s.h>
> > +#include <sound.h>
> > +#include "wm8994.h"
> > +#include <asm/arch/sound.h>
> > +
> > +/* defines */
> > +#define SOUND_400_HZ 400
> > +#define SOUND_BITS_IN_BYTE 8
> > +
> > +/* Globals */
> > +struct i2stx_info g_i2stx_pri;
> > +struct sound_codec_info g_codec_info;
>
> Can these be static? Also comments are nice.
>
> > +
> > +/*
> > + * get_sound_fdt_values gets fdt values for i2s parameters
> > + *
> > + * @param i2stx_info i2s transmitter transfer param structure
> > + * @param blob FDT blob
> > + */
> > +static void get_sound_i2s_values(struct i2stx_info *i2s)
> > +{
> > + i2s->base_address = samsung_get_base_i2s();
> > + i2s->audio_pll_clk = I2S_PLL_CLK;
> > + i2s->samplingrate = I2S_SAMPLING_RATE;
> > + i2s->bitspersample = I2S_BITS_PER_SAMPLE;
> > + i2s->channels = I2S_CHANNELS;
> > + i2s->rfs = I2S_RFS;
> > + i2s->bfs = I2S_BFS;
> > +}
> > +
> > +/*
> > + * Gets fdt values for wm8994 config parameters
> > + *
> > + * @param pcodec_info codec information structure
> > + * @param blob FDT blob
> > + * @return int value, 0 for success
> > + */
> > +static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
> > +{
> > + int error = 0;
> > +
> > + switch (AUDIO_COMPAT) {
> > + case AUDIO_COMPAT_SPI:
> > + debug("%s: Support not added for SPI interface\n",
> __func__);
> > + return -1;
> > + break;
> > + case AUDIO_COMPAT_I2C:
> > + pcodec_info->i2c_bus = AUDIO_I2C_BUS;
> > + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
> > + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
> > + break;
> > + default:
> > + debug("%s: Unknown compat id %d\n", __func__,
> AUDIO_COMPAT);
> > + return -1;
> > + }
> > +
> > + if (error == -1) {
> > + debug("fail to get wm8994 codec node properties\n");
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Gets fdt values for codec config parameters
> > + *
> > + * @param pcodec_info codec information structure
> > + * @param blob FDT blob
> > + * @return int value, 0 for success
> > + */
> > +static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
> > +{
> > + int error = 0;
> > + const char *codectype;
> > +
> > + codectype = AUDIO_CODEC;
> > +
> > + if (!strcmp(codectype, "wm8994")) {
> > + pcodec_info->codec_type = CODEC_WM_8994;
> > + error = get_sound_wm8994_values(pcodec_info);
> > + } else
> > + error = -1;
>
> {} around this else
>
> > +
> > + if (error == -1) {
> > + debug("fail to get sound codec node properties\n");
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int sound_init(void)
> > +{
> > + int ret;
> > + struct i2stx_info *pi2s_tx = &g_i2stx_pri;
> > + struct sound_codec_info *pcodec_info = &g_codec_info;
> > +
> > + /* Get the I2S Values */
> > + get_sound_i2s_values(pi2s_tx);
> > +
> > + /* Get the codec Values */
> > + if (get_sound_codec_values(pcodec_info) < 0)
> > + return -1;
> > +
> > + ret = i2s_tx_init(pi2s_tx);
> > + if (ret) {
> > + debug("%s: Failed to init i2c transmit: ret=%d\n",
> __func__,
> > + ret);
> > + return ret;
> > + }
> > +
> > + /* Check the codec type and initialise the same */
> > + if (pcodec_info->codec_type == CODEC_WM_8994) {
> > + ret = wm8994_init(pcodec_info, WM8994_AIF2,
> > + pi2s_tx->samplingrate,
> > + (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
> > + pi2s_tx->bitspersample, pi2s_tx->channels);
> > + } else {
> > + debug("%s: Unknown code type %d\n", __func__,
> > + pcodec_info->codec_type);
> > + return -1;
> > + }
> > + if (ret) {
> > + debug("%s: Codec init failed\n", __func__);
> > + return -1;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Generates square wave sound data for 1 second
> > + *
> > + * @param data data buffer pointer
> > + * @param size size of the buffer
> > + * @param freq frequency of the wave
> > + */
> > +static void sound_prepare_buffer(unsigned short *data, int size,
> uint32_t freq)
> > +{
> > + const int sample = 48000;
> > + const unsigned short amplitude = 16000; /* between 1 and 32767 */
> > + const int period = freq ? sample / freq : 0;
> > + const int half = period / 2;
> > +
> > + assert(freq);
> > +
> > + /* Make sure we don't overflow our buffer */
> > + if (size % 2)
> > + size--;
> > +
> > + while (size) {
> > + int i;
> > + for (i = 0; size && i < half; i++) {
> > + size -= 2;
> > + *data++ = amplitude;
> > + *data++ = amplitude;
> > + }
> > + for (i = 0; size && i < period - half; i++) {
> > + size -= 2;
> > + *data++ = -amplitude;
> > + *data++ = -amplitude;
> > + }
> > + }
> > +}
> > +
> > +int sound_play(uint32_t msec, uint32_t frequency)
> > +{
> > + unsigned int *data;
> > + unsigned long data_size;
> > + unsigned int ret = 0;
> > +
> > + /* Sine wave Buffer length computation */
>
> Not a sine wave anymore - maybe just s/Sine wave //
>
> > + data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
> > + data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
> > + data = malloc(data_size);
> > +
> > + if (data == NULL) {
> > + debug("%s: malloc failed\n", __func__);
> > + return -1;
> > + }
> > +
> > + sound_prepare_buffer((unsigned short *)data,
> > + data_size / sizeof(unsigned short),
> frequency);
> > +
> > + while (msec >= 1000) {
> > + ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
> > + (data_size / sizeof(int)));
> > + msec -= 1000;
> > + }
> > + if (msec) {
> > + unsigned long size =
> > + (data_size * msec) / (sizeof(int) * 1000);
> > +
> > + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
> > + }
> > +
> > + free(data);
> > +
> > + return ret;
> > +}
> > diff --git a/include/i2s.h b/include/i2s.h
> > new file mode 100644
> > index 0000000..f1b642e
> > --- /dev/null
> > +++ b/include/i2s.h
> > @@ -0,0 +1,127 @@
> > +/*
> > + * Copyright (C) 2012 Samsung Electronics
> > + * R. Chandrasekar <rcsekar at samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#ifndef __I2S_H__
> > +#define __I2S_H__
> > +
> > +/*
> > + * DAI hardware audio formats.
> > + *
> > + * Describes the physical PCM data formating and clocking. Add new
> formats
> > + * to the end.
> > + */
> > +#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */
> > +#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */
> > +#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */
> > +#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */
> > +#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
> > +#define SND_SOC_DAIFMT_AC97 6 /* AC97 */
> > +#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
> > +
> > +/* left and right justified also known as MSB and LSB respectively */
> > +#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
> > +#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
> > +
> > +/*
> > + * DAI hardware signal inversions.
> > + *
> > + * Specifies whether the DAI can also support inverted clocks for the
> specified
> > + * format.
> > + */
> > +#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */
> > +#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */
> > +#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */
> > +#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
> > +
> > +/*
> > + * DAI hardware clock masters.
> > + *
> > + * This is wrt the codec, the inverse is true for the interface
> > + * i.e. if the codec is clk and FRM master then the interface is
> > + * clk and frame slave.
> > + */
> > +#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
> > +#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM
> master */
> > +#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame
> slave */
> > +#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
> > +
> > +#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
> > +#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
> > +#define SND_SOC_DAIFMT_INV_MASK 0x0f00
> > +#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
> > +
> > +/*
> > + * Master Clock Directions
> > + */
> > +#define SND_SOC_CLOCK_IN 0
> > +#define SND_SOC_CLOCK_OUT 1
> > +
> > +/* I2S Tx Control */
> > +#define I2S_TX_ON 1
> > +#define I2S_TX_OFF 0
> > +
> > +#define FIFO_LENGTH 64
> > +
> > +/* I2s Registers */
> > +struct i2s_reg {
> > + unsigned int con; /* base + 0 , Control register */
> > + unsigned int mod; /* Mode register */
> > + unsigned int fic; /* FIFO control register */
> > + unsigned int psr; /* Reserved */
> > + unsigned int txd; /* Transmit data register */
> > + unsigned int rxd; /* Receive Data Register */
>
> Do we need the whitespace between int and the variable name?
>
> > +};
> > +
> > +/* This structure stores the i2s related information */
> > +struct i2stx_info {
> > + unsigned int rfs; /* LR clock frame size */
> > + unsigned int bfs; /* Bit slock frame size */
> > + unsigned int audio_pll_clk; /* Audio pll frequency in Hz */
> > + unsigned int samplingrate; /* sampling rate */
> > + unsigned int bitspersample; /* bits per sample */
> > + unsigned int channels; /* audio channels */
> > + unsigned int base_address; /* I2S Register Base */
> > +};
> > +
> > +/*
> > + * Sends the given data through i2s tx
> > + *
> > + * @param pi2s_tx pointer of i2s transmitter parameter structure.
> > + * @param *data address of the data buffer
>
> Remove *
>
> > + * @param data_size array size of the int buffer (total size / size
> of int)
> > + *
> > + * @return int value 0 for success, -1 in case of error
> > + */
> > +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data,
> > + unsigned long data_size);
> > +
> > +/*
> > + * Initialise i2s transmiter
> > + *
> > + * @param pi2s_tx pointer of i2s transmitter parameter structure.
> > + *
> > + * @return int value 0 for success, -1 in case of error
> > + */
> > +int i2s_tx_init(struct i2stx_info *pi2s_tx);
> > +
> > +#endif /* __I2S_H__ */
> > diff --git a/include/sound.h b/include/sound.h
> > new file mode 100644
> > index 0000000..ea0b115
> > --- /dev/null
> > +++ b/include/sound.h
> > @@ -0,0 +1,62 @@
> > +/*
> > + * Copyright (C) 2012 Samsung Electronics
> > + * R. Chandrasekar < rcsekar at samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#ifndef __SOUND_H__
> > +#define __SOUND_H__
> > +
> > +/* sound codec enum */
> > +enum en_sound_codec {
> > + CODEC_WM_8994,
> > + CODEC_WM_8995,
> > + CODEC_MAX
> > +};
> > +
> > +/* sound codec enum */
> > +enum sound_compat {
> > + AUDIO_COMPAT_SPI,
> > + AUDIO_COMPAT_I2C,
> > +};
> > +
> > +/* Codec information structure to store the info from device tree */
> > +struct sound_codec_info {
> > + int i2c_bus;
> > + int i2c_dev_addr;
> > + enum en_sound_codec codec_type;
> > +};
> > +
> > +/*
> > + * Initialises audio sub system
> > + *
> > + * @return int value 0 for success, -1 for error
> > + */
> > +int sound_init(void);
> > +
> > +/*
> > + * plays the pcm data buffer in pcm_data.h through i2s1 to make the
> > + * sine wave sound
> > + *
> > + * @return int 0 for success, -1 for error
> > + */
> > +int sound_play(uint32_t msec, uint32_t frequency);
> > +
> > +#endif /* __SOUND__H__ */
> > --
> > 1.7.4.4
> >
>
> Regards,
> Simon
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list