[U-Boot] [PATCH 1/3] Add nitrogen6x board

Eric Nelson eric.nelson at boundarydevices.com
Fri Oct 5 20:42:19 CEST 2012


On 10/05/2012 10:24 AM, Albert ARIBAUD wrote:
> Hi Eric,
>
> On Thu,  4 Oct 2012 12:49:07 -0700, Eric Nelson
> <eric.nelson at boundarydevices.com>  wrote:
>
>> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
>> ---
>>   board/boundary/nitrogen6x/Makefile     |   41 ++
>>   board/boundary/nitrogen6x/README       |   77 +++
>>   board/boundary/nitrogen6x/nitrogen6x.c |  840 ++++++++++++++++++++++++++++++++
>>   boards.cfg                             |    1 +
>>   include/configs/nitrogen6x.h           |  242 +++++++++
>>   5 files changed, 1201 insertions(+), 0 deletions(-)
>>   create mode 100644 board/boundary/nitrogen6x/Makefile
>>   create mode 100644 board/boundary/nitrogen6x/README
>>   create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
>>   create mode 100644 include/configs/nitrogen6x.h
>
> If this is essentially a copy of sabrelite, I am surprised that git
> does not report any copies. Did you use -C with git format-patch ?
>

Hi Albert,

I didn't use '-C' (didn't know about it: thanks for the tip!).

It wouldn't have detected copies though, because I made slight
changes in each of these files, replacing the board names and
file names in board/boundary/ and altering the default environment
(policy bits) in nitrogen6x.h.

Regards,


Eric


More information about the U-Boot mailing list