[U-Boot] [RFC PATCH v3 01/13] linux/usb/ch9.h: update with the version from Linux tree
Ilya Yanok
ilya.yanok at cogentembedded.com
Thu Oct 18 20:51:48 CEST 2012
Signed-off-by: Ilya Yanok <yanok at cogentembedded.com>
Signed-off-by: Ilya Yanok <ilya.yanok at cogentembedded.com>
---
drivers/usb/gadget/config.c | 1 -
drivers/usb/gadget/epautoconf.c | 1 -
drivers/usb/gadget/ether.c | 1 -
drivers/usb/gadget/s3c_udc_otg.c | 1 -
drivers/usb/gadget/usbstring.c | 1 -
include/linux/usb/ch9.h | 514 ++++++++++++++++++++++++++++++++++++--
include/usb/s3c_udc.h | 1 -
7 files changed, 499 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index f88d0c1..f9163a8 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -27,7 +27,6 @@
#include <linux/string.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index b656c8b..5b8776e 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -23,7 +23,6 @@
#include <common.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <asm/errno.h>
#include <linux/usb/gadget.h>
#include <asm/unaligned.h>
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 1e187e5..c51e69c 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -24,7 +24,6 @@
#include <asm/errno.h>
#include <linux/netdevice.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <linux/usb/cdc.h>
#include <linux/usb/gadget.h>
#include <net.h>
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 3fdfdf7..f9d24e3 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -37,7 +37,6 @@
#include <malloc.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4dbe060..95555cf 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -13,7 +13,6 @@
#include <common.h>
#include <asm/errno.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <linux/usb/gadget.h>
#include <asm/unaligned.h>
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index ce1d1e1..d1d732c 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -28,15 +28,13 @@
* [c] for consistency, removing all doubt even when it appears to
* someone that the two other points are non-issues for that
* particular descriptor type.
- *
- * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
- * Remy Bohmer <linux at bohmer.net>
*/
#ifndef __LINUX_USB_CH9_H
#define __LINUX_USB_CH9_H
#include <linux/types.h> /* __u8 etc */
+#include <asm/byteorder.h> /* le16_to_cpu */
/*-------------------------------------------------------------------------*/
@@ -70,7 +68,7 @@
#define USB_RECIP_OTHER 0x03
/* From Wireless USB 1.0 */
#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
+#define USB_RECIP_RPIPE 0x05
/*
* Standard requests, for the bRequest field of a SETUP packet.
@@ -90,6 +88,8 @@
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
#define USB_REQ_GET_ENCRYPTION 0x0E
@@ -105,10 +105,16 @@
#define USB_REQ_LOOPBACK_DATA_READ 0x16
#define USB_REQ_SET_INTERFACE_DS 0x17
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
/*
* USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
* are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.)
+ * are at most sixteen features of each type.) Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
*/
#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
@@ -120,8 +126,38 @@
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define TEST_J 1
+#define TEST_K 2
+#define TEST_SE0_NAK 3
+#define TEST_PACKET 4
+#define TEST_FORCE_EN 5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
/**
* struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -140,10 +176,6 @@
* For most devices, interfaces don't coordinate with each other, so
* such requests may be made at any time.
*/
-#if defined(__BIG_ENDIAN) || defined(__ARMEB__)
-#error (functionality not verified for big endian targets, todo...)
-#endif
-
struct usb_ctrlrequest {
__u8 bRequestType;
__u8 bRequest;
@@ -159,8 +191,12 @@ struct usb_ctrlrequest {
* (rarely) accepted by SET_DESCRIPTOR.
*
* Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
*/
/*
@@ -187,6 +223,11 @@ struct usb_ctrlrequest {
#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
#define USB_DT_WIRE_ADAPTER 0x21
#define USB_DT_RPIPE 0x22
+#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE 0x24
+/* From the USB 3.0 spec */
+#define USB_DT_SS_ENDPOINT_COMP 0x30
/* Conventional codes for class-specific descriptors. The convention is
* defined in the USB "Common Class" Spec (3.11). Individual class specs
@@ -204,6 +245,28 @@ struct usb_descriptor_header {
__u8 bDescriptorType;
} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
#define USB_DT_DEVICE_SIZE 18
@@ -230,6 +293,8 @@ struct usb_descriptor_header {
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
/*-------------------------------------------------------------------------*/
/* USB_DT_CONFIG: Configuration descriptor information.
@@ -260,11 +325,56 @@ struct usb_config_descriptor {
#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1]; /* UTF-16LE encoded */
+} __attribute__ ((packed));
+
/* note that "string" zero is special, it holds language codes that
* the device supports, not Unicode characters.
*/
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
#define USB_DT_INTERFACE_SIZE 9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+ /* NOTE: these two are _only_ in audio endpoints. */
+ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
#define USB_DT_ENDPOINT_SIZE 7
#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
@@ -282,6 +392,254 @@ struct usb_config_descriptor {
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
/*-------------------------------------------------------------------------*/
@@ -388,7 +746,7 @@ struct usb_encryption_descriptor {
/*-------------------------------------------------------------------------*/
-/* USB_DT_BOS: group of wireless capabilities */
+/* USB_DT_BOS: group of device-level capabilities */
struct usb_bos_descriptor {
__u8 bLength;
__u8 bDescriptorType;
@@ -397,6 +755,7 @@ struct usb_bos_descriptor {
__u8 bNumDeviceCaps;
} __attribute__((packed));
+#define USB_DT_BOS_SIZE 5
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
@@ -434,6 +793,61 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
__u8 bReserved;
} __attribute__((packed));
+/* USB 2.0 Extension descriptor */
+#define USB_CAP_TYPE_EXT 2
+
+struct usb_ext_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __le32 bmAttributes;
+#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
/*-------------------------------------------------------------------------*/
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
@@ -491,9 +905,22 @@ enum usb_device_speed {
USB_SPEED_UNKNOWN = 0, /* enumerating */
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
+ USB_SPEED_SUPER, /* usb 3.0 */
};
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
@@ -503,8 +930,8 @@ enum usb_device_state {
/* chapter 9 and authentication (wireless) device states */
USB_STATE_ATTACHED,
USB_STATE_POWERED, /* wired */
- USB_STATE_UNAUTHENTICATED, /* auth */
USB_STATE_RECONNECTING, /* auth */
+ USB_STATE_UNAUTHENTICATED, /* auth */
USB_STATE_DEFAULT, /* limited function */
USB_STATE_ADDRESS,
USB_STATE_CONFIGURED, /* most functions */
@@ -514,7 +941,64 @@ enum usb_device_state {
/* NOTE: there are actually four different SUSPENDED
* states, returning to POWERED, DEFAULT, ADDRESS, or
* CONFIGURED respectively when SOF tokens flow again.
+ * At this level there's no difference between L1 and L2
+ * suspend states. (L2 being original USB 1.1 suspend.)
*/
};
-#endif /* __LINUX_USB_CH9_H */
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
index 6a8fd44..7114dae 100644
--- a/include/usb/s3c_udc.h
+++ b/include/usb/s3c_udc.h
@@ -24,7 +24,6 @@
#include <asm/errno.h>
#include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
#include <linux/usb/gadget.h>
#include <linux/list.h>
#include <usb/lin_gadget_compat.h>
--
1.7.10.4
More information about the U-Boot
mailing list