[U-Boot] [PATCH v3 03/22] scsi: Add scsi_write to SCSI driver
Simon Glass
sjg at chromium.org
Mon Oct 29 16:23:46 CET 2012
From: Hung-Te Lin <hungte at chromium.org>
Implement write functionality in the scsi layer. A ''scsi write'
command is also added to console for testing.
Signed-off-by: Hung-Te Lin <hungte at chromium.org>
Signed-off-by: Simon Glass <sjg at chromium.org>
---
common/cmd_scsi.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 108 insertions(+), 7 deletions(-)
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index 50eb239..31ea788 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -75,11 +75,15 @@ void scsi_setup_test_unit_ready(ccb * pccb);
void scsi_setup_read_capacity(ccb * pccb);
void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks);
void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks);
+static void scsi_setup_write_ext(ccb *pccb, unsigned long start,
+ unsigned short blocks);
void scsi_setup_inquiry(ccb * pccb);
void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer);
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
+static ulong scsi_write(int device, ulong blknr,
+ lbaint_t blkcnt, const void *buffer);
/*********************************************************************************
@@ -109,6 +113,7 @@ void scsi_scan(int mode)
scsi_dev_desc[i].dev=i;
scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
scsi_dev_desc[i].block_read=scsi_read;
+ scsi_dev_desc[i].block_write = scsi_write;
}
scsi_max_devs=0;
for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
@@ -335,6 +340,19 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr);
printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
return 0;
+ } else if (strcmp(argv[1], "write") == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong blk = simple_strtoul(argv[3], NULL, 16);
+ ulong cnt = simple_strtoul(argv[4], NULL, 16);
+ ulong n;
+ printf("\nSCSI write: device %d block # %ld, "
+ "count %ld ... ",
+ scsi_curr_dev, blk, cnt);
+ n = scsi_write(scsi_curr_dev, blk, cnt,
+ (ulong *)addr);
+ printf("%ld blocks written: %s\n", n,
+ (n == cnt) ? "OK" : "ERROR");
+ return 0;
}
} /* switch */
return CMD_RET_USAGE;
@@ -346,9 +364,10 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
{
- ulong start,blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
ccb* pccb=(ccb *)&tempccb;
device&=0xff;
@@ -359,7 +378,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
buf_addr=(unsigned long)buffer;
start=blknr;
blks=blkcnt;
- debug ("\nscsi_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks,(unsigned long)buffer);
+ debug("\nscsi_read: dev %d startblk " LBAF
+ ", blccnt " LBAF " buffer %lx\n",
+ device, start, blks, (unsigned long)buffer);
do {
pccb->pdata=(unsigned char *)buf_addr;
if(blks>SCSI_MAX_READ_BLK) {
@@ -376,7 +397,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
start+=blks;
blks=0;
}
- debug ("scsi_read_ext: startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+ debug("scsi_read_ext: startblk " LBAF
+ ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
if(scsi_exec(pccb)!=TRUE) {
scsi_print_error(pccb);
blkcnt-=blks;
@@ -384,10 +407,65 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
}
buf_addr+=pccb->datalen;
} while(blks!=0);
- debug ("scsi_read_ext: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+ debug("scsi_read_ext: end startblk " LBAF
+ ", blccnt %x buffer %lx\n", start, smallblks, buf_addr);
return(blkcnt);
}
+/*******************************************************************************
+ * scsi_write
+ */
+
+/* Almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_WRITE_BLK 0xFFFF
+
+static ulong scsi_write(int device, ulong blknr,
+ lbaint_t blkcnt, const void *buffer)
+{
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
+ unsigned short smallblks;
+ ccb* pccb = (ccb *)&tempccb;
+ device &= 0xff;
+ /* Setup device
+ */
+ pccb->target = scsi_dev_desc[device].target;
+ pccb->lun = scsi_dev_desc[device].lun;
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
+ __func__, device, start, blks, (unsigned long)buffer);
+ do {
+ pccb->pdata = (unsigned char *)buf_addr;
+ if (blks > SCSI_MAX_WRITE_BLK) {
+ pccb->datalen = (scsi_dev_desc[device].blksz *
+ SCSI_MAX_WRITE_BLK);
+ smallblks = SCSI_MAX_WRITE_BLK;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += SCSI_MAX_WRITE_BLK;
+ blks -= SCSI_MAX_WRITE_BLK;
+ } else {
+ pccb->datalen = scsi_dev_desc[device].blksz * blks;
+ smallblks = (unsigned short)blks;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += blks;
+ blks = 0;
+ }
+ debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n",
+ __func__, start, smallblks, buf_addr);
+ if (scsi_exec(pccb) != TRUE) {
+ scsi_print_error(pccb);
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += pccb->datalen;
+ } while (blks != 0);
+ debug("%s: end startblk " LBAF ", blccnt %x buffer %lx\n",
+ __func__, start, smallblks, buf_addr);
+ return blkcnt;
+}
+
/* copy src to dest, skipping leading and trailing blanks
* and null terminate the string
*/
@@ -481,6 +559,27 @@ void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks)
pccb->cmd[7],pccb->cmd[8]);
}
+void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks)
+{
+ pccb->cmd[0] = SCSI_WRITE10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff;
+ pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff;
+ pccb->cmd[5] = ((unsigned char) (start)) & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff;
+ pccb->cmd[8] = (unsigned char)blocks & 0xff;
+ pccb->cmd[9] = 0;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ __func__,
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[7], pccb->cmd[8]);
+}
+
void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks)
{
pccb->cmd[0]=SCSI_READ6;
@@ -522,7 +621,9 @@ U_BOOT_CMD(
"scsi device [dev] - show or set current device\n"
"scsi part [dev] - print partition table of one or all SCSI devices\n"
"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'"
+ " to memory address `addr'\n"
+ "scsi write addr blk# cnt - write `cnt' blocks starting at block\n"
+ " `blk#' from memory address `addr'"
);
U_BOOT_CMD(
--
1.7.7.3
More information about the U-Boot
mailing list