[U-Boot] [PATCH 5/7] Tegra30: Cardhu: Add DT files

Tom Warren twarren.nvidia at gmail.com
Wed Oct 3 23:49:32 CEST 2012


Stephen,

On Wed, Oct 3, 2012 at 1:36 PM, Stephen Warren <swarren at wwwdotorg.org> wrote:
> On 10/02/2012 04:45 PM, Tom Warren wrote:
>> These are stripped down for bringup, They'll be filled out later
>> to match-up with the kernel DT contents, and/or as devices are
>> brought up (mmc, usb, spi, etc.).
>
>> diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
>
>> +/include/ "skeleton.dtsi"
>> +
>> +/ {
>> +     model = "NVIDIA Tegra30";
>> +     compatible = "nvidia,tegra30";
>> +
>> +     clocks {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             osc: clock {
>> +                     compatible = "fixed-clock";
>> +                     #clock-cells = <0>;
>> +             };
>> +     };
>
> Nothing uses any of the clock stuff; I don't think we should add this
> until it's needed.
>
>> +     gpio: gpio at 6000d000 {
>> +             compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
>> +             reg = <0x6000d000 0x1000>;
>> +             #gpio-cells = <2>;
>> +             gpio-controller;
>> +     };
>
> Similarly, nothing uses this.
>
>> +     serial at 70006000 {
>> +             compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
>> +             reg = <0x70006000 0x40>;
>> +             reg-shift = <2>;
>
> This needs the following extra line here:
>
>                 interrupts = <0 36 0x04>;
>
>> +             status = "disabled";
>> +     };
>
> Although again, nothing uses this, so may as well omit it.
>
>> diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
>> new file mode 100644
>> index 0000000..68563e8
>> --- /dev/null
>> +++ b/board/nvidia/dts/tegra30-cardhu.dts
>> @@ -0,0 +1,35 @@
>> +/dts-v1/;
>> +
>> +/memreserve/ 0x1c000000 0x04000000;
>> +/include/ ARCH_CPU_DTS
>> +
>> +/ {
>> +     model = "NVIDIA Cardhu";
>> +     compatible = "nvidia,cardhu", "nvidia,tegra30";
>> +
>> +     aliases {
>> +     };
>
> May as well leave that out until it's needed.
>
>> +        memory {
>> +                device_type = "memory";
>> +                reg = <0x80000000 0xc0000000>;
>> +        };
>
> There's an indentation error there.
>
>> +
>> +     clocks {
>> +             clk_32k: clk_32k {
>> +                     clock_frequency = <32000>;
>> +             };
>> +             osc {
>> +                     clock-frequency = <12000000>;
>> +             };
>> +     };
>> +
>> +     clock at 60006000 {
>> +             clocks = <&clk_32k &osc>;
>> +     };
>> +
>> +     serial at 70006000 {
>> +             status = "ok";
>> +             clock-frequency = < 216000000 >;
>> +     };
>> +};
>
> Similarly, I don't think anything uses any of that.
>

I stripped these both down to bare minimums as per your review, and I
can still build/boot on Cardhu. When I tried to remove some of these
entries earlier (clock, etc.) I guess I wasn't editing _both_ files at
the same time, so it would build or would hang.

Next rev will have truly minimal DT files. Thanks.


More information about the U-Boot mailing list