[U-Boot] [PATCH 1/2] mmc: add bcm2835 driver

[Oleksandr Tymoshenko]

On 10/26/2012 10:32 AM, Tom Rini wrote:
> On Tue, Oct 23, 2012 at 10:50:47PM -0600, Stephen Warren wrote:
>> This adds a simple driver for the BCM2835's SD controller.
>>
>> Workarounds are implemented for:
>> * Register writes can't be too close to each-other in time, or they will
>>    be lost.
>> * Register accesses must all be 32-bit, so implement custom accessors.
>>
>> This code was extracted from:
>> git://github.com/gonzoua/u-boot-pi.git master
>> which was created by Oleksandr Tymoshenko.
>>
>> Portions of the code there were obviously based on the Linux kernel at:
>> git://github.com/raspberrypi/linux.git rpi-3.2.27
>>
>> No s-o-b tags were present in either location.
> Um, that's a bit worrying to me.  Wolfgang?

I didn't have much experience with s-o-b stuff, so excuse my ignorance.
Is there official procedure, or is it enough to state that I sign off on
everything in  git://github.com/gonzoua/u-boot-pi.git master
authored by me?