[U-Boot] [PATCH v2 2/2] tegra: nand: add board pinmux
Simon Glass
sjg at chromium.org
Thu Oct 4 02:35:46 CEST 2012
Hi,
On Sat, Sep 29, 2012 at 1:02 PM, Lucas Stach <dev at lynxeye.de> wrote:
> Boards may require a different pinmux setup for NAND than the default one.
> Add a way to call into board specific code to set this up.
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
I think this is reasonable as is.
Acked-by: Simon Glass <sjg at chromium.org>
Regards,
Simon
> ---
> v2: move pinmux setup to common Tegra board code
> ---
> arch/arm/include/asm/arch-tegra/board.h | 1 +
> board/nvidia/common/board.c | 12 ++++++++++++
> drivers/mtd/nand/tegra_nand.c | 1 -
> 3 Dateien geändert, 13 Zeilen hinzugefügt(+), 1 Zeile entfernt(-)
>
> diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h
> index 7e56df7..be6bf25 100644
> --- a/arch/arm/include/asm/arch-tegra/board.h
> +++ b/arch/arm/include/asm/arch-tegra/board.h
> @@ -43,5 +43,6 @@ void gpio_early_init(void); /* overrideable GPIO config */
>
> void pin_mux_usb(void); /* overrideable USB pinmux setup */
> void pin_mux_spi(void); /* overrideable SPI pinmux setup */
> +void pin_mux_nand(void); /* overrideable NAND pinmux setup */
>
> #endif
> diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
> index dc301e7..2c7cd0d 100644
> --- a/board/nvidia/common/board.c
> +++ b/board/nvidia/common/board.c
> @@ -27,6 +27,7 @@
> #include <asm/io.h>
> #include <asm/arch/clock.h>
> #include <asm/arch/emc.h>
> +#include <asm/arch/funcmux.h>
> #include <asm/arch/pinmux.h>
> #include <asm/arch/pmu.h>
> #include <asm/arch/tegra.h>
> @@ -77,6 +78,13 @@ void __gpio_early_init_uart(void)
> void gpio_early_init_uart(void)
> __attribute__((weak, alias("__gpio_early_init_uart")));
>
> +void __pin_mux_nand(void)
> +{
> + funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT);
> +}
> +
> +void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand")));
> +
> /*
> * Routine: power_det_init
> * Description: turn off power detects
> @@ -137,6 +145,10 @@ int board_init(void)
> board_usb_init(gd->fdt_blob);
> #endif
>
> +#ifdef CONFIG_TEGRA_NAND
> + pin_mux_nand();
> +#endif
> +
> #ifdef CONFIG_TEGRA_LP0
> /* save Sdram params to PMC 2, 4, and 24 for WB0 */
> warmboot_save_sdram_params();
> diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
> index 2c1b533..5408c51 100644
> --- a/drivers/mtd/nand/tegra_nand.c
> +++ b/drivers/mtd/nand/tegra_nand.c
> @@ -992,7 +992,6 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
> /* Adjust timing for NAND device */
> setup_timing(config->timing, info->reg);
>
> - funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT);
> fdtdec_setup_gpio(&config->wp_gpio);
> gpio_direction_output(config->wp_gpio.gpio, 1);
>
> --
> 1.7.11.4
>
More information about the U-Boot
mailing list