[U-Boot] [PATCH V3 22/32] mx6q_4x_mt41j128.cfg: force ZQ calibration

[Troy Kisky]

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 2d03ff7..9e20db0 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -164,8 +164,8 @@ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408030)
 
 /* ZQ calibrate, CS0 */
 WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008040)
-WRITE_ENTRY1(MMDC_P0_MPZQHWCTRL, 0xA1380003)
-WRITE_ENTRY1(MMDC_P1_MPZQHWCTRL, 0xA1380003)
+WRITE_ENTRY1(MMDC_P0_MPZQHWCTRL, 0xA1390003)
+WRITE_ENTRY1(MMDC_P1_MPZQHWCTRL, 0xA1390003)
 
 /* MDREF,  32KHz refresh, 4 refeshes each */
 WRITE_ENTRY1(MMDC_P0_MDREF, 0x00005800)
-- 
1.7.9.5